A rock-solid platform for your premium optics. With the increasing popularity of the AK based rifles in three gun competitions, the need for a handy, light, completely reliable high speed sighting system has resulted in the UltiMAK M1-B optic mount. Its Picatinny style rail is positioned well below the iron sight axis, making this the lowest optic mount available for the AK. With a tubular sight mounted low, you will be able to use your optic without a comb riser and still use your regular hold. The system allows for co witnessing (the ability to use your iron sights right through a 1x sight as a back-up sighting system) when used with a tubular reflex sight. This heavy duty mount replaces the original steel gas tube and upper handguard, so it adds less than one ounce to the weight of the rifle, making it by far the lightest optic mount installation in the world. The forward positioning of the optic gives you faster, easier and more natural targeting while maintaining your full field of view. Multiple target or moving target engagements, with both eyes open, become second nature. The UltiMAK AK optic mount rarely if ever needs to be removed to clean the rifle, so you need not worry about loss of zero. Since the mount is clamped to the barrel and not jammed in between the gas block and the sight block like the original gas tube, several UltiMAK users have reported an improvement in their AKs' inherent accuracy. Picatinny/Weaver style rail. Replaces the gas tube. Clamps directly to barrel for maximum stability, accuracy, and optimum bore alignment. The UltiMAK Optics Mount has been engineered for compatibility with a wide range of AK rifle variations. If you have a 7.62 x 39 caliber AK with standard weight barrel and a standard length, removable gas tube (roughly seven inches, or 17.7 centimeters overall gas tube length) the Mount should fit nicely. We have yet to find a rifle of the above description that our mount does not fit, providing that the rifle is assembled reasonably straight. Some AKs have radically misaligned gas blocks as compared to the rear sight block. In rare cases, this can cause problems installing the UltiMAK Mount. Solid, one-piece 6061-T6 hard anodized aluminum body. Comes with 4140 steel clamps, screws, allen wrench, and instructions. No Gunsmithing.
SPECS: 6061-T6 Aluminum, black, matte finish. 6-7/8" (17.5cm) long. 6.7 oz. (189 g) wt. Fits all 7.62x39 caliber rifles that have original gas tubes without side gas port holes. Installation may require minor inletting to handguard.
Robust og pålitelig optikkmontering for AK-47
AK SCOUT MOUNT MODE M1-B fra ULTIMAK gir en solid plattform for dine premium optikker. Med den økende populariteten til AK-baserte rifler i tre-gun konkurranser, har behovet for et håndterlig, lett og helt pålitelig høyhastighets siktesystem ført til utviklingen av UltiMAK M1-B optikkmonteringen.
Funksjoner:
- Picatinny stil skinne plassert under aksen til jernsiktet, noe som gjør dette til den laveste optikkmonteringen tilgjengelig for AK.
- Med et lavt montert rørformet sikte kan du bruke optikken uten en kombinasjonshever og fortsatt opprettholde ditt vanlige grep.
- Systemet tillater co-witnessing, som gir mulighet til å bruke jernsiktene gjennom et 1x sikte som et backup siktesystem når det brukes med et rørformet refleks-sikte.
- Robust montering som erstatter den originale stålgassrøret og øvre håndbeskyttelse, og legger til mindre enn ett unse til vekten av riflen.
- Foran plassering av optikken gir raskere, enklere og mer naturlig målretting mens du opprettholder full synsvinkel.
- Monteringen trenger sjelden å fjernes for rengjøring av riflen, så du trenger ikke å bekymre deg for tap av nullstilling.
- Solid, ett-stykke 6061-T6 hard anodisert aluminiumskropp.
- Leveres med 4140 stålklips, skruer, unbrakonøkkel og instruksjoner. Ingen gunsmithing nødvendig.
Spesifikasjoner:
- Materiale: 6061-T6 Aluminium, svart, matt finish.
- Lengde: 6-7/8" (17.5 cm).
- Vekt: 6.7 oz. (189 g).
- Passer alle 7.62x39 kaliber rifler med originale gassrør uten sidegassporthull.
- Installasjon kan kreve mindre innskjæring av håndbeskyttelsen.