The M2-B has a Picatinny style rail positioned well below the iron sight axis, making this the lowest optic mount available for the AK. With a tubular sight mounted low, you will be able to use your optic without a comb riser and still use your regular hold. The system allows for co witnessing (the ability to use your iron sights right through a 1x sight as a back-up sighting system) when used with a tubular reflex sight. This heavy duty mount replaces the original steel gas tube and upper handguard, so it adds less than one ounce to the weight of the rifle, making it by far the lightest optic mount installation in the world. The forward positioning of the optic gives you faster, easier and more natural targeting while maintaining your full field of view. Multiple target or moving target engagements, with both eyes open, become second nature. The mount rarely if ever needs to be removed to clean the rifle, so you need not worry about loss of zero. Since the mount is clamped to the barrel and not jammed in between the gas block and the sight block like the original gas tube, several UltiMAK users have reported an improvement in their AKs' inherent accuracy. The UltiMAK Optics Mount has been engineered for compatibility with a wide range of AK rifle variations. If you have a 7.62 x 39 caliber AK with standard weight barrel and a standard length, removable gas tube (roughly seven inches, or 17.7 centimeters overall gas tube length) the Mount should fit nicely. We have yet to find a rifle of the above description that our mount does not fit, providing that the rifle is assembled reasonably straight. Some AKs have radically misaligned gas blocks as compared to the rear sight block. In rare cases, this can cause problems installing the UltiMAK Mount. (with vent holes, as found mostly on Chinese AKs) Replaces gas tube. Clamps directly to barrel for maximum stability and accuracy. Solid, one-piece 6061-T6 hard anodized aluminum body. Comes with 4140 steel clamps, screws, allen wrench, and instructions. No Gunsmithing. Made in U.S.A.
SPECS: Scout Mount – 6061-T6 hard anodized aluminum, 4140 steel mounting clamps, matte black. 6.7" (17cm) long. Fits 7.62x39 caliber rifles that have original gas tubes with side gas port holes as found mostly on Chinese AKs.
Kraftig og lett optisk monteringsløsning for AK-47
M2-B har en Picatinny-stil skinne plassert godt under aksen til jernsikten, noe som gjør dette til den laveste optiske monteringen tilgjengelig for AK. Med et tubulært sikte montert lavt, kan du bruke optikken uten en comb riser og fortsatt opprettholde ditt vanlige grep. Systemet tillater co-witnessing (muligheten til å bruke jernsiktene rett gjennom et 1x sikte som et backup siktesystem) når det brukes med et tubulært refleks-sikte.
Denne kraftige monteringen erstatter den originale stålgassrøret og øvre håndbeskyttelse, så den tilfører mindre enn ett unse til vekten av riflen, noe som gjør det til den absolutt letteste optiske monteringsinstallasjonen i verden. Den fremre posisjoneringen av optikken gir raskere, enklere og mer naturlig måling samtidig som du opprettholder fullt synsfelt. Flere mål eller bevegelige målengasjementer, med begge øyne åpne, blir en andre natur.
Monteringen må sjelden, om noen gang, fjernes for å rengjøre riflen, så du trenger ikke å bekymre deg for tap av nullstilling. Siden monteringen er klemt til løpet og ikke klemt mellom gassblokken og sikteblokken som det originale gassrøret, har flere UltiMAK-brukere rapportert om en forbedring i den iboende nøyaktigheten til sine AK-er. UltiMAK Optics Mount er konstruert for kompatibilitet med et bredt spekter av AK-riflevarianter. Hvis du har en 7.62 x 39 kaliber AK med standard vektløp og et standard lengde, avtagbart gassrør (omtrent syv tommer, eller 17,7 centimeter totalt gassrør lengde) bør monteringen passe fint.
Vi har ennå ikke funnet en rifle av ovennevnte beskrivelse som vår monteringen ikke passer, forutsatt at riflen er samlet rimelig rett. Noen AK-er har radikalt feiljusterte gassblokker sammenlignet med bakre sikteblokk. I sjeldne tilfeller kan dette forårsake problemer ved installasjon av UltiMAK Mount. (med ventilhull, som finnes mest på kinesiske AK-er) Erstatt gassrøret. Klemmer direkte til løpet for maksimal stabilitet og nøyaktighet. Solid, ett-stykke 6061-T6 hard anodisert aluminiums kropp. Kommer med 4140 stålklips, skruer, unbrakonøkkel og instruksjoner. Ingen gunsmithing. Laget i USA.
SPESIFIKASJONER:
- Scout Mount – 6061-T6 hard anodisert aluminium, 4140 stålmonteringsklips, matt svart.
- Lengde: 6.7" (17 cm).
- Passer til 7.62x39 kaliber rifler som har originale gassrør med sidegassport-hull, som finnes mest på kinesiske AK-er.