Din handlekurv er tom.

Handlekurv

37 17 00 00

Meld på nyhetsbrev

WILSON COMBAT
92/96 OVERSIZED MAGAZINE RELEASE

811826020253 965000196

The oversize Beretta® 92/96 magazine release makes it easy to depress your magazine button under stress. Useful for shooters with all hand sizes. No fitting required. Allows shooters with all hand sizes to release the magazine with little or no shift in grip. CNC machined from 4140 heat treated steel. Oversize checkered pad. Black Armor Tuff finish. Not ambidextrous, for right hand shooter on left side of pistol. NOTE: Does not include bushings and spring. Requires re-use of your bushings and spring.

Mer...

Den overdimensjonerte Beretta® 92/96 magasinutløseren gjør det enkelt å trykke inn magasinknappen under stress. Nyttig for skyttere med alle håndstørrelser. Ingen tilpasning nødvendig. Lar skyttere med alle håndstørrelser slippe ut magasinet med lite eller ingen endring i grepet. CNC-maskinert fra 4140 varmebehandlet stål. Overdimensjonert rutet pad. Sort Armor Tuff finish. Ikke ambidextrous, for høyrehendt skytter på venstre side av pistolen. MERK: Inkluderer ikke bøssinger og fjær. Krever gjenbruk av dine bøssinger og fjær.

Mer...

Kundevurderinger for WILSON COMBAT 92/96 OVERSIZE MAGAZINE RELEASE

Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 4,3

Mostly good (01.11.2014)

I recently purchased a M92A1. I decided to trick it out with practical mods. This mag catch works fantastic, but does NOT work with factory hard plastic grips! I have it set up for right-handed shooter and the mag catch will not depress fully, thus magazines would not drop free. Another minor tweak is that when inserting a magazine, sometimes the right top-front edge of the magazine tube would catch on the magazine catch ledge(the one that retains the magazine itself.) So I have to at times forcefully insert and seat a magazine. It may sound like I'm griping, but I'm not. Just PLEEEEEASE, for the sake of safety/function of your firearm, install, check, test, verify before you carry a pistol into a situation where you'll need. it.

Great for shooters with smaller hands! (07.04.2015)

Great quality product like almost all Wilson parts. Made of durable metal and not the flimsy plastic factory release. Easy enough to install and fit great. Hardest part of the installation is getting the bushing and springs seated so pay attention to that part of the video. For the price and functionality it cannot be beat. Fit my 92A1 with Alumagrips great. No fitting or modification required. Great feel on the fingers and big enough I can use my shooting hand middle finger to drop the mag. No second hand required! Highly recommended!

Huge improvement over OEM release. (22.04.2015)

Took watching a few different videos to understand how to properly fit the part, but that's a knock on my amateur gunsmithing abilities not the part. Fits great and works great. I can activate the release with my middle finger on my shooting hand, and I have small hands. Solid metal construction, good fit, and good function. Highly recommend.

OS Mag Release (20.01.2016)

I just installed this into my Beretta 96FS recently and I love it! Makes mag changes easier and smoother without having to adjust my grip on the gun. I watched a couple of videos on how to install it into the grip. It was a little bit of a pain to install but once I got it in there, it was flawless!

Excellent replacement (14.05.2016)

This is an excellent replacement part for the plastic magazine release. I installed this on a M9A1 pistol with Beretta factory plastic grips. One reviewer said it did not work for him. Mine had plenty of clearance and worked GREAT. Not sure what his issue could have been. I have installed 3 of these, one on this pistol, one on a 92A1, and one on a M9. No issues at all with grips. When installing make sure to note the direction the plunger legs go into the recesses. If installing for right hand operation, place the release into the slot and insert the left side into the hole in the frame. Then push in on the right side. It should pop into place.

fitting required on older model (14.02.2018)

The extended release and larger pad are excellent, but my late 80s / early 90s 92 required significant fitting to get it installed. As it was, it only seated all the way after a light tap with a mallet. After smoothing the rounded side with a 2000-grit wet sand & light stoning the ledges on the other side I was able to get it to move freely enough that the springs would return it to the correct position. It wasnt super smooth, but that could've been that I didn't do a great job fitting it.

It may fit newer models better

Checkered Wilson Ovsz Mag Release (23.06.2018)

This looks great, however it took me 6 hours of filing and stoning the part to get it to even slide into the frame. After all of the hand work, I had to cold blue the part. It was a lot of work. I would not buy it again.

Les 7 flere anmeldelser fra brownells.com

949 949 1 NOK

Produktnr.: 965000196
WILSON COMBAT 92/96 OVERSIZE MAGAZINE RELEASE
Produsentnr.: 678 811826020253 Den overdimensjonerte Beretta® 92/96 magasinutløseren gjør det enkelt å trykke inn magasinknappen under stress. Nyttig for skyttere med alle håndstørrelser. Ingen tilpasning nødvendig. Lar skyttere med alle håndstørrelser slippe ut magasinet med lite eller ingen endring i grepet. CNC-maskinert fra 4140 varmebehandlet stål. Overdimensjonert rutet pad. Sort Armor Tuff finish. Ikke ambidextrous, for høyrehendt skytter på venstre side av pistolen. MERK: Inkluderer ikke bøssinger og fjær. Krever gjenbruk av dine bøssinger og fjær.

949 NOK 5 kr 949,00 *

Leveringstid ca. 14-21 dager.
5 stk. på lageret i USA

Spesifikasjoner: Make: Beretta Modell: 92, 96

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Attributes

Make: Beretta Modell: 92,96 Leveringsvekt: 0,091kg Frakthøyde: 13mm Fraktbredde: 32mm Fraktlengde: 76mm

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.x

Mer...

Kundevurderinger for WILSON COMBAT 92/96 OVERSIZE MAGAZINE RELEASE

Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 4,3

Mostly good (01.11.2014)

Great for shooters with smaller hands! (07.04.2015)

Huge improvement over OEM release. (22.04.2015)

OS Mag Release (20.01.2016)

Excellent replacement (14.05.2016)

fitting required on older model (14.02.2018)

Checkered Wilson Ovsz Mag Release (23.06.2018)

Les 7 flere anmeldelser fra brownells.com

Kunder kjøpte også

WOLFF FACTORY WEIGHT TRIGGER UNIT
BERETTA TRIGGER CONVERSION UNIT

WOLFF

Kommer til lager

kr 499,00 * kr 499,00 - kr 549,00*

Avtrekksfjærer

WILSON COMBAT BERETTA 92/96 SHORT REACH STEEL TRIGGER
BERETTA 92/96 SHORT REACH STEEL TRIGGER

WILSON COMBAT

Kommer til lager

kr 649,00 *

Avtrekk

4,9

BERETTA USA HAMMER SPRING D VERSION
HAMMER SPRING D VERSION

BERETTA USA

Kommer til lager

kr 169,00 *

Hane fjærer

BERETTA USA 92FS & CX4 MAGAZINE 9MM 30RDS
92/CX4 STORM 30RD 9MM MAGAZINE

BERETTA USA

Kommer til lager

kr 849,00 *

Magasiner

4,5

HOGUE SLOTTED GRIP SCREWS, BLUE, FITS BERETTA/TAURUS
SEMI AUTO GRIP SCREWS

HOGUE

Kommer til lager

kr 379,00 * kr 379,00 - kr 389,00*

Grepsskruer

Logg inn

Glemt passord?
Registrere

CONNECT

NETTSTEDSKART

PRODUKTKATEGORIER

BESTILLING

KUNDE SERVICE

Velkommen!

Velkommen til Brownells.no, Norges ledende leverandør av våpenrelaterte produkter, våpendeler, børsemakerverktøy, ladeverktøy, ladeutstyr og ladekomponenter!

Vårt kundeløfte:

Uansett om du bare liker å skyte, har våpen som hobby, er børsemaker og reparerer våpen daglig eller bare eier et våpen er dette siden for deg! I over 75 år har skyttere, profesjonelle børsemakere, hobby utøvere, militæret, politiet og våpenreparatører kommet til Brownells for å finne produkter og deler av høy kvalitet. Hos oss finner du over 40 000 produkter inkludert unike våpendeler, tilbehør, børsemakerverktøy, ladeverktøy, ladeutstyr, komponenter, ammunisjon og andre produkter for å vedlikeholde, reparere eller oppgradere dine våpen.