Uncompromising Quality For Added Performance & Better Accuracy
Forged from ordnance steel to strict, national match specs; rifled by a proprietary technique that holds lands and grooves to exceptionally close tolerances and leaves the surface finish mirror smooth. Air gauged to maintain .0002" tolerance through the bore. Feed ramps are throated for wadcutter ammo. Standard Barrel - Non-ramped, oversize hood, top and bottom lugs to achieve an exact fit for optimum match accuracy. Ramped Barrel - Fully supports the case head; gives direct feeding from magazine to chamber. Requires machining of frame. Gunsmithing fitting required. Std - Standard barrel, non-ramped. W/N - Wilson/Nowlin Ramp. C/P - Clark/Para Ordnance Ramp
SPECS: 4150 ordnance steel, in-the-white. Available in 5” (12.7cm), 6” (15.2cm), or Commander 4.25” (10.8cm) lengths.
Mer...
Kompromissløs kvalitet for ekstra ytelse og bedre nøyaktighet
Smidd fra ordnance stål til strenge, nasjonale kampspesifikasjoner; riflet med en egenutviklet teknikk som holder land og riller til eksepsjonelt tette toleranser og lar overflatebehandlingsspeilet glatt. Luftmålt for å opprettholde 0,0002 "toleranse gjennom borehullet. Innmatingsramper blir strupt for wadcutter-ammo. Standard Barrel - Ikke-rampet, overdimensjonert hette, topp- og bunnfeste for å oppnå en nøyaktig passform for optimal matchnøyaktighet. Ramped Barrel - Støtter fullt ut kassehode; gir direkte mating fra magasin til kammer. Krever maskinering av ramme. Gunsmithing montering påkrevd. Std - Standard fat, ikke-rampet. W / N - Wilson / Nowlin Ramp. C / P - Clark / Para Ordnance Ramp
SPECS: 4150 ordnance stål, hvitt. Tilgjengelig i 5 ”(12,7 cm), 6” (15,2 cm) eller Commander 4,25 ”(10,8 cm) lengder.
Mer...
Kundevurderinger for 5" Kart 1911 Auto Barrel, .38 Super W/N
Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 4,9
Excellent Gunsmith Fit Barrel(09.03.2017)
This is a really nice gunsmith fit barrel. It is oversized in all the right areas (hood width/length and lower lugs). Geometry was spot on and while it required removing material from the hood and lugs, it wasn't excessive. Link pin hole required a light pass with a reamer to get a good fit with a .154" pin. Once everything was fit, the chamber only required a few turns with a finish reamer to complete the installation.
Excellent barrel(28.08.2009)
Followed the KART instructions for installation and was very happy with the accuracy obtained. The instructions assume some familiarity with the 1911 cycle and parts interaction so a first timer will find the process difficult. It is steel so be sure and keep it oiled after filing. I purchased the 9mm in standard ramp but would recommend buying one of the ramped barrels as you may find it very difficult to get the 9mm to feed well on the standard ramp.
None better(11.09.2009)
I have replaced barrels in six 1911s using the Kart 45ACP standard. Each solved a previous long standing problem. Every one has worked perfectly. After thousands of rounds through each barrel, they have never had any feed problems and they have retained their accuracy. Anyone can easily do a perfect barrel replacement by following Kart's simple clear instructions.
Great Single Part Investment(20.03.2010)
Easy to install though did require some fitting as per the directions. Superb improvement highly recomemnded fit my Springfeild GI SS well in about 45mins. Totally improved the accuracy as promised and just improved overall preformance.
None Better(01.01.2012)
This barrel is a standard on the bullseye line. It requires gunsmith fitting. If you look down the bore you won't see any machine marks which adds to the accuracy.
The Best for your money(06.02.2012)
Best barrel for wadcutter for the money,, never been dis satisfied with final accuracy, all under a 2" group at 50 yards,, and I have installed a bunch of them. Not the greatest for hardball, but a great wadcutter barrel
The best 1911 barrel hands down(08.01.2017)
Accept no substitutes, Kart barrels are the best hands down. Ask any of the top 1911 smiths and they will agree. Fred uses a proprietary honing process not even his wife knows. His barrels have the best bores you'll ever see. Oversized in the right spots for gunsmith fit.
Krav til kjøpetillatelse eller våpenkort og legitimasjon dersom kjøper har våpen i samme kaliber.(Original kjøpetillatelse må sendes pr post. Ordre blir ikke effekturert før kjøpetillatelse eller annen dokumentasjon foreligger))
Beskrivelse
5 "Kart 1911 Auto Barrel, .38 Super W / N
Attributes
Barrel Length:
5''
Barrel Vekt:
.37 lbs
Cartridge:
38 Super
Finish:
Unfinished
Make:
1911
Model:
Government
Style:
Ramp
Elementdetaljer
Made in USA
US eksport klassifisering: I(g)
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
472020045 5" Kart 1911 Auto Barrel, .45 ACP Std 5 "Kart 1911 Auto Barrel, .45 ACP Std
472020138 5" Kart 1911 Auto Barrel, .38 Super C/P Smidd fra ordnance stål til strenge, nasjonale kampspesifikasjoner; riflet med en egenutviklet teknikk som holder land og riller til eksepsjonelt tette toleranser og lar overflatebehandlingsspeilet glatt. Luftmålt for å opprettholde 0,0002 "toleranse gjennom borehullet. Innmatingsramper blir strupt for wadcutter-ammo. Standard Barrel - Ikke-rampet, overdimensjonert hette, topp- og bunnfeste for å oppnå en nøyaktig passform for optimal matchnøyaktighet. Ramped Barrel - Støtter fullt ut kassehode; gir direkte mating fra magasin til kammer. Krever maskinering av ramme. Gunsmithing montering påkrevd. Std - Standard fat, ikke-rampet. W / N - Wilson / Nowlin Ramp. C / P - Clark / Para Ordnance Ramp
472021045 6" Kart 1911 Auto Barrel, .45 ACP Std Smidd fra ordnance stål til strenge, nasjonale kampspesifikasjoner; riflet med en egenutviklet teknikk som holder land og riller til eksepsjonelt tette toleranser og lar overflatebehandlingsspeilet glatt. Luftmålt for å opprettholde 0,0002 "toleranse gjennom borehullet. Innmatingsramper blir strupt for wadcutter-ammo. Standard Barrel - Ikke-rampet, overdimensjonert hette, topp- og bunnfeste for å oppnå en nøyaktig passform for optimal matchnøyaktighet. Ramped Barrel - Støtter fullt ut kassehode; gir direkte mating fra magasin til kammer. Krever maskinering av ramme. Gunsmithing montering påkrevd. Std - Standard fat, ikke-rampet. W / N - Wilson / Nowlin Ramp. C / P - Clark / Para Ordnance Ramp
472000013 4.25" Commander Barrel, .45 ACP Std Smidd fra ordnance stål til strenge, nasjonale kampspesifikasjoner; riflet med en egenutviklet teknikk som holder land og riller til eksepsjonelt tette toleranser og lar overflatebehandlingsspeilet glatt. Luftmålt for å opprettholde 0,0002 "toleranse gjennom borehullet. Innmatingsramper blir strupt for wadcutter-ammo. Standard Barrel - Ikke-rampet, overdimensjonert hette, topp- og bunnfeste for å oppnå en nøyaktig passform for optimal matchnøyaktighet. Ramped Barrel - Støtter fullt ut kassehode; gir direkte mating fra magasin til kammer. Krever maskinering av ramme. Gunsmithing montering påkrevd. Std - Standard fat, ikke-rampet. W / N - Wilson / Nowlin Ramp. C / P - Clark / Para Ordnance Ramp
472000015 6" 9mm Wilson/Nowlin Ramp Barrel Smidd fra ordnance stål til strenge, nasjonale kampspesifikasjoner; riflet med en egenutviklet teknikk som holder land og riller til eksepsjonelt tette toleranser og lar overflatebehandlingsspeilet glatt. Luftmålt for å opprettholde 0,0002 "toleranse gjennom borehullet. Innmatingsramper blir strupt for wadcutter-ammo. Standard Barrel - Ikke-rampet, overdimensjonert hette, topp- og bunnfeste for å oppnå en nøyaktig passform for optimal matchnøyaktighet. Ramped Barrel - Støtter fullt ut kassehode; gir direkte mating fra magasin til kammer. Krever maskinering av ramme. Gunsmithing montering påkrevd. Std - Standard fat, ikke-rampet. W / N - Wilson / Nowlin Ramp. C / P - Clark / Para Ordnance Ramp
4086NOK4kr 4 086,00
*
4 på lager
Spesifikasjoner:Barrel Length: 6''Barrel Weight: .355 lbsCartridge: 9 mm LugerFinish: NaturalMake: 1911Model: GovernmentStyle: Match Grade, Ramp
472000017 6" Kart 1911 Auto Barrel, 45 ACP C/P Smidd fra ordnance stål til strenge, nasjonale kampspesifikasjoner; riflet med en egenutviklet teknikk som holder land og riller til eksepsjonelt tette toleranser og lar overflatebehandlingsspeilet glatt. Luftmålt for å opprettholde 0,0002 "toleranse gjennom borehullet. Innmatingsramper blir strupt for wadcutter-ammo. Standard Barrel - Ikke-rampet, overdimensjonert hette, topp- og bunnfeste for å oppnå en nøyaktig passform for optimal matchnøyaktighet. Ramped Barrel - Støtter fullt ut kassehode; gir direkte mating fra magasin til kammer. Krever maskinering av ramme. Gunsmithing montering påkrevd. Std - Standard fat, ikke-rampet. W / N - Wilson / Nowlin Ramp. C / P - Clark / Para Ordnance Ramp
472000016 6" Kart 1911 Auto Barrel, 9mm C/P Smidd fra ordnance stål til strenge, nasjonale kampspesifikasjoner; riflet med en egenutviklet teknikk som holder land og riller til eksepsjonelt tette toleranser og lar overflatebehandlingsspeilet glatt. Luftmålt for å opprettholde 0,0002 "toleranse gjennom borehullet. Innmatingsramper blir strupt for wadcutter-ammo. Standard Barrel - Ikke-rampet, overdimensjonert hette, topp- og bunnfeste for å oppnå en nøyaktig passform for optimal matchnøyaktighet. Ramped Barrel - Støtter fullt ut kassehode; gir direkte mating fra magasin til kammer. Krever maskinering av ramme. Gunsmithing montering påkrevd. Std - Standard fat, ikke-rampet. W / N - Wilson / Nowlin Ramp. C / P - Clark / Para Ordnance Ramp
Uncompromising Quality For Added Performance & Better Accuracy
Forged from ordnance steel to strict, national match specs; rifled by a proprietary technique that holds lands and grooves to exceptionally close tolerances and leaves the surface finish mirror smooth. Air gauged to maintain .0002" tolerance through the bore. Feed ramps are throated for wadcutter ammo. Standard Barrel - Non-ramped, oversize hood, top and bottom lugs to achieve an exact fit for optimum match accuracy. Ramped Barrel - Fully supports the case head; gives direct feeding from magazine to chamber. Requires machining of frame. Gunsmithing fitting required. Std - Standard barrel, non-ramped. W/N - Wilson/Nowlin Ramp. C/P - Clark/Para Ordnance Ramp
SPECS: 4150 ordnance steel, in-the-white. Available in 5” (12.7cm), 6” (15.2cm), or Commander 4.25” (10.8cm) lengths.
Mer...
Kompromissløs kvalitet for ekstra ytelse og bedre nøyaktighet
Smidd fra ordnance stål til strenge, nasjonale kampspesifikasjoner; riflet med en egenutviklet teknikk som holder land og riller til eksepsjonelt tette toleranser og lar overflatebehandlingsspeilet glatt. Luftmålt for å opprettholde 0,0002 "toleranse gjennom borehullet. Innmatingsramper blir strupt for wadcutter-ammo. Standard Barrel - Ikke-rampet, overdimensjonert hette, topp- og bunnfeste for å oppnå en nøyaktig passform for optimal matchnøyaktighet. Ramped Barrel - Støtter fullt ut kassehode; gir direkte mating fra magasin til kammer. Krever maskinering av ramme. Gunsmithing montering påkrevd. Std - Standard fat, ikke-rampet. W / N - Wilson / Nowlin Ramp. C / P - Clark / Para Ordnance Ramp
SPECS: 4150 ordnance stål, hvitt. Tilgjengelig i 5 ”(12,7 cm), 6” (15,2 cm) eller Commander 4,25 ”(10,8 cm) lengder.
Mer...
Kundevurderinger for 5" Kart 1911 Auto Barrel, .38 Super W/N
Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 4,9
Excellent Gunsmith Fit Barrel(09.03.2017)
This is a really nice gunsmith fit barrel. It is oversized in all the right areas (hood width/length and lower lugs). Geometry was spot on and while it required removing material from the hood and lugs, it wasn't excessive. Link pin hole required a light pass with a reamer to get a good fit with a .154" pin. Once everything was fit, the chamber only required a few turns with a finish reamer to complete the installation.
Excellent barrel(28.08.2009)
Followed the KART instructions for installation and was very happy with the accuracy obtained. The instructions assume some familiarity with the 1911 cycle and parts interaction so a first timer will find the process difficult. It is steel so be sure and keep it oiled after filing. I purchased the 9mm in standard ramp but would recommend buying one of the ramped barrels as you may find it very difficult to get the 9mm to feed well on the standard ramp.
None better(11.09.2009)
I have replaced barrels in six 1911s using the Kart 45ACP standard. Each solved a previous long standing problem. Every one has worked perfectly. After thousands of rounds through each barrel, they have never had any feed problems and they have retained their accuracy. Anyone can easily do a perfect barrel replacement by following Kart's simple clear instructions.
Great Single Part Investment(20.03.2010)
Easy to install though did require some fitting as per the directions. Superb improvement highly recomemnded fit my Springfeild GI SS well in about 45mins. Totally improved the accuracy as promised and just improved overall preformance.
None Better(01.01.2012)
This barrel is a standard on the bullseye line. It requires gunsmith fitting. If you look down the bore you won't see any machine marks which adds to the accuracy.
The Best for your money(06.02.2012)
Best barrel for wadcutter for the money,, never been dis satisfied with final accuracy, all under a 2" group at 50 yards,, and I have installed a bunch of them. Not the greatest for hardball, but a great wadcutter barrel
The best 1911 barrel hands down(08.01.2017)
Accept no substitutes, Kart barrels are the best hands down. Ask any of the top 1911 smiths and they will agree. Fred uses a proprietary honing process not even his wife knows. His barrels have the best bores you'll ever see. Oversized in the right spots for gunsmith fit.