Din handlekurv er tom.

Handlekurv

37 17 00 00

Meld på nyhetsbrev

SMITH & ALEXANDER
1911 BEAVERTAIL HIGH GRIP SAFETY

849009027

.220\ Radius Fits Springfield Armory Frame Contour

.220° radius eliminates the unsightly gap at the top edge of the frame tangs on Springfield Armory guns. Raised palmswell gives positive release with any style grip. Curved shape lets the pistol set lower in your hand for better recoil control. Extra width and a long trigger block arm help you get a precise, custom-looking fit.

SPECS: Steel, matte blue or stainless steel (s/s) finish. .886" (22mm) from rear of hole to tip. Available in Standard and Palmswell. Fits Series 70, can be modified to fit Series 80. .220° radius requires alteration to frame.

Mer...

.220 \ Radius Passer til Springfield Armory Frame Contour

0,220° radius eliminerer det skjemmende gapet i den øvre kanten av rammetappene på Springfield Armory-våpen. Hevet palmswell gir positiv utløsning med ethvert stilgrep. Buet form lar pistolen settes lavere i hånden for bedre rekylkontroll. Ekstra bredde og en lang triggerblokkarm hjelper deg med å få en presis, tilpasset passform.

SPECS: Stål, matt blå eller rustfritt stål (s / s) finish. .886 "(22 mm) fra baksiden av hullet til spissen. Tilgjengelig i Standard og Palmswell. Passer til serie 70, kan modifiseres for å passe til serie 80.. 220 ° radius krever endring i ramme.

Mer...

Kundevurderinger for SMITH & ALEXANDER .220° GRIP SAFETY, PALMSWELL, BLUE

Antall vurderinger: 11
Fra brownells.com: 11
Gjennomsnittsvurdering: 4,7

Love it (12.04.2013)

I bought this grip safety and the installation jig. For my Springfield Armory 1911. I used my Dremel tool and a grinding wheel. I have never done anything like this before. I didn't realize the tag inside the package opened to revel instructions till after I finished installing it. I just did what seemed natural and it came out PERFECT! No fitting of the grip safety was needed. Very easy!

Very confortable! (16.02.2010)

This grip safey was fairly easy to install. Some people don't like to hand fit things, but I think it makes for a better fit sometimes! When istalling this part the .220 Jig from S&A is a must! The grip feels alot better than the standard grip safety on my mil-spec. It does give you a higher grip on the frame which helps with accuracy...and thats always good!!!

Very comfortable (11.01.2011)

I chose this part to replace the palmswell version with came with my Springfield loaded. The bump had a tendency to dig into my hand. I was hoping for a drop-in, but that was not the case; I had to dremel the inside slightly to fit it to the frame (I considered modifying the frame to be unacceptable), as well as file the groove for the hammer strut so that it would clear. It was not difficult, but did take patience. I was able to fit it to my pistol in about 1-2 hours, max. In the end it was worth it, the grip is far more comfortable and more aesthetically pleasing now than before. The internal lug which blocks the trigger worked just fine out of the box and needed no modification.

Not only for SA !! (11.09.2010)

Is anyone else old enough to remember Safari Arms ? In the mid 1980's I built an IPSC .45 ACP based on a blue Colt Series 70. I don't think that blue was an option at that time, so I used a Safari Arms SS beavertail grip safety. I recently decided to try make the appearance of that pistol more uniform by going with a blue beavertail. I measured the radius as well as I could and decided to take a chance by ordering it since Brownell's return policy is so great (no questions asked / no hesitation). Well, it worked !! The only adjustment needed was to remove several thousandths from the bottom of the grip safety so that it didn't bind on the S&A Mainspring Housing / Magwell. IT IS PERFECT! Thank you Brownell's.

Perfect fit, following directions (15.03.2012)

Little by little I'm cutomizing my 25 year old Springfield N/M. The last project was to replace the grip safety and mainspring housing. It required the .220 modification to the frame. I worked slowly and followed "on line" directions. It turned out perfect and looks as good as my other factory "semi-custom" pistols.

Great Product, Beautiful Fit (08.05.2012)

Great product. extremely comfortable and my Wilson Combat Ultra Skeletonized hammer is the perfect match for this grip safety. Does require the S & A Installation jig if doing the work yourself (for installs on Springfield 1911-A1 GI Models).

Very nice fitment, great product! (07.12.2013)

Fit nicely to my Springfield 1911-A1. Make sure to get the Smith & Alexander .220 installation jig and the installation will go easy. I used a Dremel with a grinding bit to do most of the work, some light sanding to smooth it out, then applied some Perma Blue. Very happy with this product.

feels great (06.02.2010)

I had one of these installed on my 1911 and she feels great. cant wait to take her to the range!

Easy install (20.05.2010)

I have installed 3 of these with the S&A Jig. makes the shaping and installattion very easy. Minimum trial and error fitting for a great looking job.

Perfect fit for Springfield (24.06.2011)

Very fun to install as ong as you go slow and if you are buying this please GET THE JIG!Great quality part that blends right in perfectly with a Springfield and will leave no cheesy looking gaps,very professional looking when finished!Thank you S&A for keeping the Springfield lovers in mind!Added some pictures below-Springfield GI full size.

Springfields best friend (31.12.2012)

Unfourtunalty there are not to many .220 radius grip safetys for us Springfield lovers. But with a little extra work you can file your own memory groves or checkering. The high ride with a custom blend fits perfect. Even tho choices are limmited at least this choice is well worth it.

Les 11 flere anmeldelser fra brownells.com

0 0 4 NOK

Produktnr.: 849009027
SMITH & ALEXANDER .220° GRIP SAFETY, PALMSWELL, BLUE 0,220° radius eliminerer det skjemmende gapet i den øvre kanten av rammetappene på Springfield Armory-våpen. Hevet palmswell gir positiv utløsning med ethvert stilgrep. Buet form lar pistolen settes lavere i hånden for bedre rekylkontroll. Ekstra bredde og en lang triggerblokkarm hjelper deg med å få en presis, tilpasset passform.

Varsle ved tilgjengelighet

Kan ikke bestilles

Spesifikasjoner: Finish: Blued Hand: Right Make: 1911 Model: Government, Commander, Officers Style: Grip

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Attributes

Finish: Blued Hand: Right Make: 1911 Modell: Commander,Government,Officers Style: Grip Leveringsvekt: 0,045kg Høyde: 10mm Bredde: 107mm Lengde: 124mm

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.x

Produktnr.: 849009017
SMITH & ALEXANDER .220° GRIP SAFETY, STANDARD, BLUE
Produsentnr.: GS220BLSTDS70 0,220° radius eliminerer det skjemmende gapet i den øvre kanten av rammetappene på Springfield Armory-våpen. Hevet palmswell gir positiv utløsning med ethvert stilgrep. Buet form lar pistolen settes lavere i hånden for bedre rekylkontroll. Ekstra bredde og en lang triggerblokkarm hjelper deg med å få en presis, tilpasset passform.

Varsle ved tilgjengelighet

Kan ikke bestilles

Spesifikasjoner: Finish: Blued Hand: Right Make: 1911 Model: Government, Commander, Officers Style: Grip

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Attributes

Finish: Blued Hand: Right Make: 1911 Modell: Commander,Government,Officers Style: Grip Leveringsvekt: 0,036kg Høyde: 1mm Bredde: 83mm Lengde: 146mm

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.x

Produktnr.: 849009117
SMITH & ALEXANDER .220° GRIP SAFETY, STANDARD, S/S 0,220° radius eliminerer det skjemmende gapet i den øvre kanten av rammetappene på Springfield Armory-våpen. Hevet palmswell gir positiv utløsning med ethvert stilgrep. Buet form lar pistolen settes lavere i hånden for bedre rekylkontroll. Ekstra bredde og en lang triggerblokkarm hjelper deg med å få en presis, tilpasset passform.

Varsle ved tilgjengelighet

Kan ikke bestilles

Spesifikasjoner: Finish: Stainless Steel Hand: Right Make: 1911 Model: Government, Commander, Officers Style: Grip

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Attributes

Finish: Stainless Steel Hand: Right Make: 1911 Modell: Commander,Government,Officers Style: Grip Leveringsvekt: 0,036kg Høyde: 13mm Bredde: 83mm Lengde: 146mm

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.x

Produktnr.: 849009127
SMITH & ALEXANDER .220° GRIP SAFETY, PALMSWELL, S/S 0,220° radius eliminerer det skjemmende gapet i den øvre kanten av rammetappene på Springfield Armory-våpen. Hevet palmswell gir positiv utløsning med ethvert stilgrep. Buet form lar pistolen settes lavere i hånden for bedre rekylkontroll. Ekstra bredde og en lang triggerblokkarm hjelper deg med å få en presis, tilpasset passform.

Varsle ved tilgjengelighet

Kan ikke bestilles

Spesifikasjoner: Finish: Stainless Steel Hand: Right Make: 1911 Model: Government, Commander, Officers Style: Grip

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Attributes

Finish: Stainless Steel Hand: Right Make: 1911 Modell: Commander,Government,Officers Style: Grip Leveringsvekt: 0,023kg Høyde: 10mm Bredde: 69mm Lengde: 114mm

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.x

.220\ Radius Fits Springfield Armory Frame Contour

Mer...

.220 \ Radius Passer til Springfield Armory Frame Contour

Mer...

Kundevurderinger for SMITH & ALEXANDER .220° GRIP SAFETY, PALMSWELL, BLUE

Antall vurderinger: 11
Fra brownells.com: 11
Gjennomsnittsvurdering: 4,7

Love it (12.04.2013)

Very confortable! (16.02.2010)

Very comfortable (11.01.2011)

Not only for SA !! (11.09.2010)

Perfect fit, following directions (15.03.2012)

Great Product, Beautiful Fit (08.05.2012)

Very nice fitment, great product! (07.12.2013)

feels great (06.02.2010)

I had one of these installed on my 1911 and she feels great. cant wait to take her to the range!

Easy install (20.05.2010)

I have installed 3 of these with the S&A Jig. makes the shaping and installattion very easy. Minimum trial and error fitting for a great looking job.

Perfect fit for Springfield (24.06.2011)

Springfields best friend (31.12.2012)

Les 11 flere anmeldelser fra brownells.com

Kunder kjøpte også

WILSON COMBAT SS BULLET PROOF SLIDE STOP, .45 ACP
1911 BULLET PROOF™ SLIDE STOP

WILSON COMBAT

På lager 2 på lager

kr 1 299,00 * kr 1 249,00 - kr 1 299,00*

Slide Catches

3,6 (8)

WILSON COMBAT PLUNGER TUBE, BLUE
1911 PLUNGER TUBE

WILSON COMBAT

På lager 10 på lager

kr 439,00 * kr 439,00 - kr 459,00*

Stempelrør

0 (0)

WILSON COMBAT PLUNGER SPRING ASSEMBLY (B)
1911 AUTO "FACTORY PLUS" PLUNGER SPRING ASSEMBLY

WILSON COMBAT

Ikke tilgjengelig Kan ikke restnoteres for øyeblikket

kr 169,00 * kr 169,00 - kr 189,00*

Plunger Spring Assemblies

0 (0)

EGW MAINSPRING HOUSING 20 LPI BLUE
MAINSPRING HOUSING

EGW

Kan ikke restnoteres for øyeblikket Kan ikke restnoteres for øyeblikket

kr 799,00 *

Hovedfjærhus

0 (0)

BROWNELLS 1911 AUTO OVERSIZED BUSHING TAP
1911 AUTO OVERSIZED STOCK BUSHINGS & TAP

BROWNELLS

På lager 10+ på lager

kr 649,00 * kr 289,00 - kr 2 099,00*

Gjengeverktøy | Gate foringer

4,5 (8)

Logg inn

Glemt passord?
Registrere

CONNECT

NETTSTEDSKART

PRODUKTKATEGORIER

BESTILLING

KUNDE SERVICE

Velkommen!

Velkommen til Brownells.no, Norges ledende leverandør av våpenrelaterte produkter, våpendeler, børsemakerverktøy, ladeverktøy, ladeutstyr og ladekomponenter!

Vårt kundeløfte:

Uansett om du bare liker å skyte, har våpen som hobby, er børsemaker og reparerer våpen daglig eller bare eier et våpen er dette siden for deg! I over 75 år har skyttere, profesjonelle børsemakere, hobby utøvere, militæret, politiet og våpenreparatører kommet til Brownells for å finne produkter og deler av høy kvalitet. Hos oss finner du over 40 000 produkter inkludert unike våpendeler, tilbehør, børsemakerverktøy, ladeverktøy, ladeutstyr, komponenter, ammunisjon og andre produkter for å vedlikeholde, reparere eller oppgradere dine våpen.