Direct replacement hammers with custom features for all types of shooters. Quality castings, CNC finish machined and hardened for durability. Wide Spur (WS) - Bullseye hammer with an extra-wide, checkered spur for easier cocking.
SPECS: Steel, blued, matte finish.
Mer...
Kvalitet, rimelige erstatningshammere
Direkte erstatningshammere med tilpassede funksjoner for alle typer skyttere. Kvalitetsstøpninger, CNC-finish bearbeidet og herdet for holdbarhet. Wide Spur (WS) - Bullseye-hammer med en ekstra bred, riflet spore for enklere spenning.
SPECS: Stål, blånet, matt finish.
Mer...
Kundevurderinger for JOHN MASEN BLUE WS HAMMER
Antall vurderinger: 9
Fra brownells.com: 9
Gjennomsnittsvurdering: 2,3
Worth it to a machinist.(08.03.2014)
I polished out a Para-Ordnance P-12 and wanted the traditional, "hammer-spur" look on the weapon. This casting was an easily machineable piece [I cut off the wide spur plus I wanted to give it the under cut hammer modification]. After machining, lapping the sear contact area and giving it a high polish, it dropped right in making the gun a handsome custom piece. The specs were accurate and it range fires fine. The only draw back is polishing out more casting marks than anticipated but I expected that with the price. A great buy for machinist type gunners.
John Masen Hammer:(04.02.2010)
A cast part. Rough surface, pitting, mold irregularities, uneven seams, deformed hammer hooks that could not be saved. Cost more to return than I paid for it. You get what you pay for. Spend the extra $$$$ and get a quality forged hammer.
ss hammer(01.05.2012)
fits well,looks good ,good price,works well
Pretty good, actually(09.07.2017)
This hammer came, and honestly, I expected an unusable part. This one is of good quality, and very usable. Hammer hooks are good, even the hammer strut hole was slightly bigger making hammer-swapping a little easier, the pin goes in nice and easy. Only gripe I have is the color of the steel is matte, and very dark. Goes OK with a stainless 1911. If you have a mil spec grip safety, you will have to modify, or install a beavertail grip safety.
Smith work required not a drop in part(23.12.2009)
Least expensive on the site. Manufacturer said it was a CNC part. Works great but required a lot of attention to the engaging surfaces. Very rough!
John Masen Hammer(04.02.2010)
Cast part with wide seams, rough finish, hammer hooks not square. Cost more to send it back than I paid for it. Now collecting dust on my bench.
Requires Fitting(25.09.2014)
This hammer works great as a government replacement hammer. The hooks are shaped in the arc of a circle, which looks really strange at first. However, when the hook height is dressed down to .020" and then the hooks faces dressed square, you end up with a nice hammer that works well. I suggest tuning the hammer using the 080-823-000WB Marvel Sear & Hammer Jig. If you want to learn how to do 1911 trigger jobs, this is a great practice hammer.
John Masen Cast Hammers:(04.02.2010)
Very rough casting, uneven seams, core-shift, deformed hammer hooks. Good hammer for a non-firing replica.
Did not function(03.01.2011)
Strut pin hole drilled .030" off so will not allow hammer to rotate when fully cocked.
Produktnr.: 555103012 JOHN MASEN BLUE WS HAMMER Produsentnr.: 4555B Direkte erstatningshammere med tilpassede funksjoner for alle typer skyttere. Kvalitetsstøpninger, CNC-finish bearbeidet og herdet for holdbarhet. Wide Spur (WS) - Bullseye-hammer med en ekstra bred, riflet spore for enklere spenning.
Made in USA
US eksport klassifisering: 0A501.c
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Oppdag 1911 HAMMER fra JOHN MASEN! ✨ Kvalitetsstøpninger med ekstra bred riflet spore for enkel spenning. Perfekt for alle skyttere.
Direct replacement hammers with custom features for all types of shooters. Quality castings, CNC finish machined and hardened for durability. Wide Spur (WS) - Bullseye hammer with an extra-wide, checkered spur for easier cocking.
SPECS: Steel, blued, matte finish.
Mer...
Kvalitet, rimelige erstatningshammere
Direkte erstatningshammere med tilpassede funksjoner for alle typer skyttere. Kvalitetsstøpninger, CNC-finish bearbeidet og herdet for holdbarhet. Wide Spur (WS) - Bullseye-hammer med en ekstra bred, riflet spore for enklere spenning.
SPECS: Stål, blånet, matt finish.
Mer...
Kundevurderinger for JOHN MASEN BLUE WS HAMMER
Antall vurderinger: 9
Fra brownells.com: 9
Gjennomsnittsvurdering: 2,3
Worth it to a machinist.(08.03.2014)
I polished out a Para-Ordnance P-12 and wanted the traditional, "hammer-spur" look on the weapon. This casting was an easily machineable piece [I cut off the wide spur plus I wanted to give it the under cut hammer modification]. After machining, lapping the sear contact area and giving it a high polish, it dropped right in making the gun a handsome custom piece. The specs were accurate and it range fires fine. The only draw back is polishing out more casting marks than anticipated but I expected that with the price. A great buy for machinist type gunners.
John Masen Hammer:(04.02.2010)
A cast part. Rough surface, pitting, mold irregularities, uneven seams, deformed hammer hooks that could not be saved. Cost more to return than I paid for it. You get what you pay for. Spend the extra $$$$ and get a quality forged hammer.
ss hammer(01.05.2012)
fits well,looks good ,good price,works well
Pretty good, actually(09.07.2017)
This hammer came, and honestly, I expected an unusable part. This one is of good quality, and very usable. Hammer hooks are good, even the hammer strut hole was slightly bigger making hammer-swapping a little easier, the pin goes in nice and easy. Only gripe I have is the color of the steel is matte, and very dark. Goes OK with a stainless 1911. If you have a mil spec grip safety, you will have to modify, or install a beavertail grip safety.
Smith work required not a drop in part(23.12.2009)
Least expensive on the site. Manufacturer said it was a CNC part. Works great but required a lot of attention to the engaging surfaces. Very rough!
John Masen Hammer(04.02.2010)
Cast part with wide seams, rough finish, hammer hooks not square. Cost more to send it back than I paid for it. Now collecting dust on my bench.
Requires Fitting(25.09.2014)
This hammer works great as a government replacement hammer. The hooks are shaped in the arc of a circle, which looks really strange at first. However, when the hook height is dressed down to .020" and then the hooks faces dressed square, you end up with a nice hammer that works well. I suggest tuning the hammer using the 080-823-000WB Marvel Sear & Hammer Jig. If you want to learn how to do 1911 trigger jobs, this is a great practice hammer.
John Masen Cast Hammers:(04.02.2010)
Very rough casting, uneven seams, core-shift, deformed hammer hooks. Good hammer for a non-firing replica.
Did not function(03.01.2011)
Strut pin hole drilled .030" off so will not allow hammer to rotate when fully cocked.
Hjelp og kontakt
(0) 
Nyhetsbrev
Klassisk visning
Mobilvisning