Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge
811291030450 100061488
Mountain Tactical Company is excited to offer their Gen 2 Performance Series Picatinny rails for the Tikka T3/T3x available in 0 MOA and 20 MOA. The recoil lug is now machined into the rail as one integral system. The primary advantage of the Performance Series picatinny rail system is our proprietary utilization of Tikka's Opti-Lock recess in the action.  This recoil lug absorbs the shearing forces of the mount under recoil instead of the four tiny screws included in most other mounting systems. These are the original mounts introduced to the world that incorporated a recoil lug for the Tikka rifle system when Mountain Tactical Company was founded. These rails are full, MIL-STD 1913 spec rails machined to an amazing +/- .0005"""" tolerance.  Machined from one piece of 6061 aluminum and MIL-STD Type 3 anodizing, these rails will give you a lifetime of service.  Type 3 anodizing creates a hardened coating with a Rockwell Hardness value between 60 and 70.   Unlike standard Weaver style rail mounts with limited contact with the scope rings, our full picatinny rails contact the scope rings over the entire width of the mount.  This eliminates potential damage that can occur under heavy recoil. The Mountain Tactical Company Performance Series rails for the Tikka T3/T3x are the finest Tikka optic mounts you will find anywhere. Torque to 25 in/lbs Specifications: Body – 6061-T6 Billet Aluminum Finish –Mil-Spec Hard Anodized
1649 1649 1 NOK
Produktnr.: 100061488
MOUNTAIN TACTICAL T3/T3X EXTENDED PERF RAIL - 20 MOA
Produsentnr.: T3T3XREXT20 811291030450 Mountain Tactical Company er stolte over å tilby deres Gen 2 Performance Series Picatinny-skinner for Tikka T3/T3x tilgjengelig i 0 MOA og 20 MOA. Rekyllugen er nå maskinert inn i skinnen som ett integrert system. Den primære fordelen med Performance Series picatinny-skinner er vår proprietære bruk av Tikkas Opti-Lock fordypning i våpenets handling. Denne rekyllugen absorberer skjærkreftene til festet under rekyl istedenfor de fire små skruene som er inkludert i de fleste andre monteringssystemer. Dette er de originale festene som ble introdusert til verden som inkluderte en rekyllug for Tikka-riflesystemet da Mountain Tactical Company ble grunnlagt. Disse skinnene er fullstendige, MIL-STD 1913 spesifikasjonsskinner maskinert til en utrolig +/- 0,0005 tommer toleranse. Maskinert fra ett stykke 6061 aluminium og med MIL-STD Type 3 anodisering, vil disse skinnene gi deg en levetid med tjeneste. Type 3 anodisering skaper et herdet belegg med en Rockwell-hardhetsverdi mellom 60 og 70. I motsetning til standard Weaver-stil skinnemonteringer med begrenset kontakt med kikkert-ringene, kontakter våre fullstendige picatinny-skinner kikkert-ringene over hele bredden av festet. Dette eliminerer potensiell skade som kan oppstå under kraftig rekyl. Mountain Tactical Company Performance Series-skinner for Tikka T3/T3x er de fineste Tikka-optikkfestene du vil finne noe sted. Moment til 25 in/lbs Spesifikasjoner: Kropp – 6061-T6 Billet Aluminium Finish –Mil-Spec Hard Anodisert
1649 NOK 0 kr 1 649,00 *
Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.
Spesifikasjoner: Elevation: 20 MOA Farge: Black Make: Tikka Material: Aluminum Modell: T3, T3x Number of Bases: 1-Piece Style: Extension

Attributes

Elevation: 20 MOA Farge: Black Make: Tikka Material: Aluminum Modell: T3,T3x Number of Bases: 1-Piece Style: Extension Leveringsvekt: 0,079kg Frakthøyde: 254mm Fraktbredde: 102mm Fraktlengde: 254mm

Elementdetaljer

Made in USA



Mountain Tactical Company is excited to offer their Gen 2 Performance Series Picatinny rails for the Tikka T3/T3x available in 0 MOA and 20 MOA. The recoil lug is now machined into the rail as one integral system. The primary advantage of the Performance Series picatinny rail system is our proprietary utilization of Tikka's Opti-Lock recess in the action.  This recoil lug absorbs the shearing forces of the mount under recoil instead of the four tiny screws included in most other mounting systems. These are the original mounts introduced to the world that incorporated a recoil lug for the Tikka rifle system when Mountain Tactical Company was founded. These rails are full, MIL-STD 1913 spec rails machined to an amazing +/- .0005"""" tolerance.  Machined from one piece of 6061 aluminum and MIL-STD Type 3 anodizing, these rails will give you a lifetime of service.  Type 3 anodizing creates a hardened coating with a Rockwell Hardness value between 60 and 70.   Unlike standard Weaver style rail mounts with limited contact with the scope rings, our full picatinny rails contact the scope rings over the entire width of the mount.  This eliminates potential damage that can occur under heavy recoil. The Mountain Tactical Company Performance Series rails for the Tikka T3/T3x are the finest Tikka optic mounts you will find anywhere. Torque to 25 in/lbs Specifications: Body – 6061-T6 Billet Aluminum Finish –Mil-Spec Hard Anodized
Nyhetsbrev