Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

EGW
S&W REVOLVER TRIJICON RMR SIGHT MOUNT

841370116546 296000578
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mounts fits: Baby Desert Eagle (Post 2006) EAA Witness Elite Match This mount does not fit: Rock Island 1911s Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
999 999 1 NOK
Produktnr.: 296000578
EGW S&W REVOLVER TRIJICON RMR SIGHT MOUNT
Produsentnr.: 49519 841370116546 Materiale: 7075 Aluminium Belegg: Matt svart hardcoat Samlet lengde: 1,780" Samlet bredde: 1,1" Monteringstilbehør: (2) 6-32 flatt hode skruer, (1) 6-32 X 3/16 sett skrue Rødpunktsikte tilpasning: Trijicon RMR, Holosun HS507C Denne monteringen passer til: Baby Desert Eagle (etter 2006) EAA Witness Elite Match Denne monteringen passer ikke til: Rock Island 1911s Bare fjern baksiktet på pistolen din og erstatt det med vår montering for å kunne montere ditt Trijicon RMR rødpunktsikte. Ingen endringer er nødvendige. Du kan når som helst ta av vår montering og erstatte baksiktet. Monteringstilbehør inkludert. Monteringsinstruksjoner Fjern baksiktet* Installer EGW Siktemontering i skinnen Stram sett skruen (hvis aktuelt) Plasser rødpunktsiktet på EGW Siktemonteringen (å legge en liten bit papir mellom rødpunktsiktet og siktemonteringen vil gjøre fjerning enklere og vil holde Loctite borte fra rødpunktsiktet.) Påfør blå Loctite på de medfølgende monteringsskruene Trekk til monteringsskruene med 15in/lbs 2 flate hodekapselskruer - Levert for Trijicon RMR Skruene som følger med denne monteringen krever en 5/64'' unbrakonøkkel for installasjon.
999 NOK 2 kr 999,00 *
Leveringstid ca. 14-21 dager.
2 stk. på lageret i USA
Spesifikasjoner: Farge: Black Make: Smith & Wesson Material: Aluminum Modell: K Frame, L Frame, N Frame, X Frame Number of Bases: 1-Piece Style: Tactical

Attributes

Farge: Black Make: Smith & Wesson Material: Aluminum Modell: K Frame,L Frame,N Frame,X Frame Number of Bases: 1-Piece Style: Tactical Leveringsvekt: 0,039kg Frakthøyde: 25mm Fraktbredde: 83mm Fraktlengde: 140mm

Elementdetaljer

Made in USA




Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mounts fits: Baby Desert Eagle (Post 2006) EAA Witness Elite Match This mount does not fit: Rock Island 1911s Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
Nyhetsbrev