Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

EGW
SPRINGFIELD XD TRIJICON RMR SIGHT MOUNT

841370116508 296000582
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mounts fits: Baby Desert Eagle (Post 2006) EAA Witness Elite Match This mount does not fit: Rock Island 1911s Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
1049 1049 1 NOK
Produktnr.: 296000582
EGW SPRINGFIELD XD TRIJICON RMR SIGHT MOUNT
Produsentnr.: 49523 841370116508 Materiale: 7075 Aluminium Belegg: Matt svart hardcoat Samlet lengde: 1.780" Samlet bredde: 1.1" Monteringsutstyr: (2) 6-32 flatt hode skruer, (1) 6-32 X 3/16 innstillings skrue Rødpunktsikte-tilpasning: Trijicon RMR, Holosun HS507C Denne monteringen passer til: Desert Eagle (etter 2006) EAA Witness Elite Match Denne monteringen passer ikke til: Rock Island 1911s Bare fjern baksiktet på våpenet ditt og erstatt det med vår montering for å feste ditt Trijicon RMR rødpunktsikte. Ingen endringer er nødvendige. Du kan når som helst ta av monteringen og sette tilbake baksiktet. Monteringsutstyr inkludert. Installasjonsinstruksjoner Fjern baksiktet* Installer EGW Siktemontering i svalehalen Stram til innstillings skruen (hvis aktuelt) Plasser rødpunkt siktet på EGW Siktemontering (å legge en liten bit papir mellom rødpunkt siktet og siktemonteringen vil gjøre fjerning enklere og vil holde Loctite unna rødpunkt siktet.) Påfør blå Loctite på de medfølgende monteringsskruene Dra monteringsskruene til med 15in/lbs 2 flatt hodekapsel skruer - Levert for Trijicon RMR Skruene som følger med denne monteringen krever en 5/64'' unbrakonøkkel for installasjon.
1049 NOK 4 kr 1 049,00 *
Leveringstid ca. 14-21 dager.
4 stk. på lageret i USA
Spesifikasjoner: Farge: Black Make: Springfield Material: Aluminum Modell: XD, XD Mod 2, XDS, XDM, XD-E Number of Bases: 1-Piece Style: Tactical

Attributes

Farge: Black Make: Springfield Material: Aluminum Modell: XD,XD Mod 2,XD-E,XDM,XDS Number of Bases: 1-Piece Style: Tactical Leveringsvekt: 0,031kg Frakthøyde: 25mm Fraktbredde: 89mm Fraktlengde: 140mm

Elementdetaljer

Made in USA




Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mounts fits: Baby Desert Eagle (Post 2006) EAA Witness Elite Match This mount does not fit: Rock Island 1911s Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
Nyhetsbrev