Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

BROWNELLS
SHOTGUN MAINSPRING TOOL

050806107243 080000114
Stop Fighting With Stubborn Mainsprings
Specially designed tool shortens the time and eliminates the frustration that goes along with changing mainsprings in double barrel shotguns. Notched, blade tip captures the plunger head so you can compress the spring and lift both parts free from the receiver. No more scratching and gouging the plunger or inner receiver surfaces with an ordinary screwdriver. Tool works equally well for installation simply seat the end of the mainspring in the receiver, hook the blade notch around the plunger head, compress the spring, and engage the plunger in the hammer. Stout, hardened steel shank provides plenty of leverage and keeps you close to your work for maximum control.
SPECS: Shank - Steel, hardened to Rc 58-60. 1½" (6.3cm) x 5/16" (7.9mm) dia. Handle - Plastic. 3¾" (9.5cm) x 1" (2.5cm) dia.
349 349 1 NOK
Produktnr.: 080000114
BROWNELLS SHOTGUN MAINSPRING TOOL 050806107243 Spesialdesignet verktøy som forkorter tiden og eliminerer frustrasjonen som følger med å bytte hovedfjærer i dobbeltløpede hagler. Notert bladspiss fanger opp stempelet slik at du kan komprimere fjæren og løfte begge deler fri fra våpenhuset. Ikke mer riper og skrammer på stempelet eller indre overflater i våpenhuset med en vanlig skrutrekker. Verktøyet fungerer like godt ved installasjon; plasser bare enden av hovedfjæren i våpenhuset, krok bladets not rundt stempelet, komprimer fjæren, og fest stempelet i hammeren. Robust, herdet stålskaft gir god giring og holder deg nær arbeidet for maksimal kontroll.
349 NOK 1 kr 349,00 *
Leveringstid ca. 14-21 dager.
1 stk. på lageret i USA
Spesifikasjoner: Make: Universal Shotguns Material: Steel

Attributes

Make: Universal Shotguns Material: Steel Leveringsvekt: 0,045kg Frakthøyde: 23mm Fraktbredde: 74mm Fraktlengde: 142mm

Elementdetaljer

Made in USA




Stop Fighting With Stubborn Mainsprings
Specially designed tool shortens the time and eliminates the frustration that goes along with changing mainsprings in double barrel shotguns. Notched, blade tip captures the plunger head so you can compress the spring and lift both parts free from the receiver. No more scratching and gouging the plunger or inner receiver surfaces with an ordinary screwdriver. Tool works equally well for installation simply seat the end of the mainspring in the receiver, hook the blade notch around the plunger head, compress the spring, and engage the plunger in the hammer. Stout, hardened steel shank provides plenty of leverage and keeps you close to your work for maximum control.
SPECS: Shank - Steel, hardened to Rc 58-60. 1½" (6.3cm) x 5/16" (7.9mm) dia. Handle - Plastic. 3¾" (9.5cm) x 1" (2.5cm) dia.
Nyhetsbrev