Din handlekurv er tom.

Handlekurv

37 17 00 00

Meld på nyhetsbrev

BROWNELLS
SHOTGUN BUTTSTOCK BOLT BITS

080870201

No Wedge Bits For 3/8" Drive Tools; For Remington 870 & 1100

Self-guiding, sleeved bits fit Remington 870 and 1100 buttstocks perfectly; can't wedge between stock bolt and wood. Use with 6" long 3/8" drive extension and T-handle listed below.

SPECS: 870 is ¾" (19.0mm) diameter x 1½" (3.8cm) long. 1100 is 7/8" (22.2mm) diameter x 1-5/8" (4.1cm) long.

Mer...

Ingen kilebiter for 3/8 "drivverktøy; For Remington 870 & 1100

Selvledende, ermerbiter passer perfekt til Remington 870 og 1100 rumpe; kan ikke kile mellom akselbolt og tre. Brukes med 6 "lang 3/8" stasjonsforlengelse og T-håndtak listet nedenfor.

SPECS: 870 er ¾ "(19,0 mm) diameter x 1½" (3,8 cm) lang. 1100 er 7/8 "(22,2 mm) diameter x 1-5 / 8" (4,1 cm) lang.

Mer...

Kundevurderinger for BROWNELLS REMINGTON 870 BUTTSTOCK BOLT BIT

Antall vurderinger: 10
Fra brownells.com: 10
Gjennomsnittsvurdering: 5

Worth the money (22.10.2016)

I wanted to replace the stock on my 870. To remove the stock bolt I tried screwdrivers, WD40, penetrating oil all to no avail. Bought this bit and the stock bolt came loose in moments. Still required significant effort, but it came loose. just to be sure the bolt bit was the right tool, I tried the screwdriver again before using the bolt bit and the bolt wouldn't budge. Buying this bit actually was a net cost savings to me because the only other option was to cut the stock off and even then there is no guarantee that the remainder of the bolt would have been easy to remove. Buy this bit and simplify your life.

Built tough great tool (30.09.2009)

Had a rusted up Remington 1100 that had broken two other wrenches of less quality, was running through all my normal methods of removing the rusted nut when I spotted this wrench in the catalog so I ordered it up, [...] took it out of the box, put it on a breaker bar and "POP" off came the nut! Great tool!

A "No Brainer" Purchase (02.12.2009)

I was wrestling with various screwdrivers and other Heath Robinson-esque devices to try to get my stuck 11-87 bolt off with zero success. I eventually caved and bought this. The stock was off within 5 seconds of unwrapping the parcel from Brownells. Just get it.

Just Buy It (30.04.2010)

So Here's the story: I have a 1980 model 1100 with a weak and noisy action spring. Additionally the butt stock was loose, could be just that or broken. Sought advise as to the best way to remove the nut and was told about the many different tools to get the job done. Ranging from a wide blade screwdriver to a wood boring bit.

Two things you must have to remove the stock safely and properly: 1. The ability to apply the proper amount of torque, both tightening and loosening. 2. The ability to keep the tool from slipping out of the slot stripping the nut and/or breaking the stock. This tool does both; in fact it is the only tool that does both.

Turns out the stock was just loose and the spring was kinked and worn out. The weekend after fixing my gun, a club buddy asked if I bought this bit. He wanted to borrow it because he had used a screwdriver on his, slipped and took a huge chunk out of the inside of his stock.

" Fantastic piece of equipment " (02.07.2012)

I used this tool to remove an old stubborn disfigured stock nut from my 1100. Proved to be fast, safe and left my stock damage free, I highly suggest this tool as the price for the outcome is " priceless "!

Excellent tool (07.05.2013)

If you own or work on Remington 1100's you must have this tool. Don't risk punching a hole through the stock for the small price of this excellent product. You will never get the bolt tight enough with a screwdriver and the stock will continue to come loose, usually in the middle of a hunting trip or a day shooting clays. Just buy it, it is worth every penny.

Socket Really Works (20.12.2013)

Have been trying all things I have read online to remove bolt. Screw Driver, Lug Wrench PB Blaster. Tried all with no success. Ordered the bit and tried it today. Had a rusted bolt probably from 30 years ago. Put the bit on and had the bolt off in a minute flat. No fuss no problems. If you can turn it with a big screw driver you don't need this. If you can't I would buy this bit. It is cheaper than a gun smith and you have it from now on. Is a bit pricy but have you checked other tool prices lately.
This was for a 70's model 1100 magnum that has been babtized numerous times especially on New Years for the past two years in a row.

Works like a charm! (20.08.2015)

I recently purchased this bit to change the buttstock on my 11-87 LC High Gloss. Ordering was a breeze, customer service was very helpful, and the bit arrived 4 business days after I placed the order. Once the bit arrived, it functioned exactly as expected. I was able to remove the old stock and install the new one with no problems at all. I'd definitely recommend this to anyone who needs to remove the buttstock on a Remington 11-87, and based on this experience, I won't hesitate to order from Brownell's in the future.

Right tool for the job (09.12.2015)

Made short work of removing the butt retaining bolt without fear of damaging my expensive Monte Carlo buttstock. The right tool for job which could save you a lot of money in the long run. Get it and throw it in your maintance kit. You'll need it again if your a regular 1100 shooter.

Buy this tool. (07.05.2018)

Great tool. the only method that worked.

Les 10 flere anmeldelser fra brownells.com

649 649 2 NOK

Produktnr.: 080870201
BROWNELLS REMINGTON 870 BUTTSTOCK BOLT BIT
Produsentnr.: 870STOCKBIT Selvledende, ermerbiter passer perfekt til Remington 870 og 1100 rumpe; kan ikke kile mellom akselbolt og tre. Brukes med 6 "lang 3/8" stasjonsforlengelse og T-håndtak listet nedenfor.

649 NOK 6 kr 649,00 *

Leveringstid ca. 14-21 dager.
6 stk. på lageret i USA

Spesifikasjoner: Make: Remington Modell: 870

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Attributes

Make: Remington Modell: 870 Leveringsvekt: 0,045kg Høyde: 1mm Bredde: 83mm Lengde: 146mm

Elementdetaljer

Made in USA

Produktnr.: 080187201
BROWNELLS 1100 BUTTSTOCK BOLT BIT Selvledende, ermerbiter passer perfekt til Remington 870 og 1100 rumpe; kan ikke kile mellom akselbolt og tre. Brukes med 6 "lang 3/8" stasjonsforlengelse og T-håndtak listet nedenfor.

649 NOK 0 kr 649,00 *

Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.

Spesifikasjoner: Make: Remington Modell: 1100

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Attributes

Make: Remington Modell: 1100 Leveringsvekt: 0,068kg Høyde: 30mm Bredde: 50mm Lengde: 60mm

Elementdetaljer

Made in USA

No Wedge Bits For 3/8" Drive Tools; For Remington 870 & 1100

Self-guiding, sleeved bits fit Remington 870 and 1100 buttstocks perfectly; can't wedge between stock bolt and wood. Use with 6" long 3/8" drive extension and T-handle listed below.

SPECS: 870 is ¾" (19.0mm) diameter x 1½" (3.8cm) long. 1100 is 7/8" (22.2mm) diameter x 1-5/8" (4.1cm) long.

Mer...

Ingen kilebiter for 3/8 "drivverktøy; For Remington 870 & 1100

Selvledende, ermerbiter passer perfekt til Remington 870 og 1100 rumpe; kan ikke kile mellom akselbolt og tre. Brukes med 6 "lang 3/8" stasjonsforlengelse og T-håndtak listet nedenfor.

SPECS: 870 er ¾ "(19,0 mm) diameter x 1½" (3,8 cm) lang. 1100 er 7/8 "(22,2 mm) diameter x 1-5 / 8" (4,1 cm) lang.

Mer...

Kundevurderinger for BROWNELLS REMINGTON 870 BUTTSTOCK BOLT BIT

Antall vurderinger: 10
Fra brownells.com: 10
Gjennomsnittsvurdering: 5

Worth the money (22.10.2016)

Built tough great tool (30.09.2009)

A "No Brainer" Purchase (02.12.2009)

Just Buy It (30.04.2010)

" Fantastic piece of equipment " (02.07.2012)

Excellent tool (07.05.2013)

Socket Really Works (20.12.2013)

Works like a charm! (20.08.2015)

Right tool for the job (09.12.2015)

Buy this tool. (07.05.2018)

Great tool. the only method that worked.

Les 10 flere anmeldelser fra brownells.com

Kunder kjøpte også

BROWNELLS 12 GAUGE MAGAZINE TUBE DENT RAISER
MAGAZINE TUBE DENT RAISER

BROWNELLS

På lager Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA

kr 1 249,00 * kr 1 249,00 - kr 1 449,00*

Bulkrettere

2,7

GG&G, INC. REM FRONT MOUNT
SHOTGUN SLING MOUNT

GG&G, INC.

På lager Leveringstid ca. 14-21 dager.
6 stk. på lageret i USA

kr 369,00 * kr 369,00 - kr 649,00*

Reimbøylefeste komponenter | Reimmontasje for hagle

4,6

Choate REMINGTON 870/1100/11-87 BLUE MAGAZINE EXTENSION, 2 RDS
REMINGTON 870/1100/11-87 BLUED SHOTGUN MAGAZINE EXTENSION

Choate

Kommer til lager Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.

kr 1 099,00 * kr 1 099,00 - kr 1 149,00*

4,3

BRILEY REM. 12 GA/ 20 GA 1100/11-87 BOLT HANDLE
SHOTGUN BOLT OPERATING HANDLE

BRILEY

Kommer til lager Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.

kr 949,00 * kr 949,00 - kr 1 149,00*

Hevarm

Logg inn

Glemt passord?
Registrere

CONNECT

NETTSTEDSKART

PRODUKTKATEGORIER

BESTILLING

KUNDE SERVICE

Velkommen!

Velkommen til Brownells.no, Norges ledende leverandør av våpenrelaterte produkter, våpendeler, børsemakerverktøy, ladeverktøy, ladeutstyr og ladekomponenter!

Vårt kundeløfte:

Uansett om du bare liker å skyte, har våpen som hobby, er børsemaker og reparerer våpen daglig eller bare eier et våpen er dette siden for deg! I over 75 år har skyttere, profesjonelle børsemakere, hobby utøvere, militæret, politiet og våpenreparatører kommet til Brownells for å finne produkter og deler av høy kvalitet. Hos oss finner du over 40 000 produkter inkludert unike våpendeler, tilbehør, børsemakerverktøy, ladeverktøy, ladeutstyr, komponenter, ammunisjon og andre produkter for å vedlikeholde, reparere eller oppgradere dine våpen.