Din handlekurv er tom.

Handlekurv

37 17 00 00

Meld på nyhetsbrev

CROSSFIRE SHOOTING GEAR
10/22® T3 MAGAZINE RELEASE

812254022277 100006639

Lets You Drop The Mag Without Breaking Your Grip

Extended lever has a wide, ambidextrous finger pad to allow you to drop the mag without changing your grip or shooting position. Activates easily with just the trigger finger, so you can drop the magazine without fumbling. Engineered not to release the magazine when accidentally bumped. Ergonomically shaped, molded from lightweight yet durable polymer. Drop-in fit.

SPECS: Injection-molded polymer, matte black. 2½" (6.3cm) OAL, 15⁄8" (4.1cm) long lever arm, 11⁄8" (2.8cm) wide thumb pad.

Mer...

Lar Deg Slippe Magasinet Uten Å Bryte Grepet

Utvidet spak har en bred, ambidekster tommelpute som lar deg slippe magasinet uten å endre grep eller skytestilling. Aktiveres enkelt med bare avtrekkerfingeren, slik at du kan slippe magasinet uten å famle. Konstruert for ikke å slippe magasinet ved et uhell. Ergonomisk formet, støpt fra lett, men holdbar polymer. Passer direkte inn.

SPECS: Injeksjonsstøpt polymer, matt svart. 2½" (6.3cm) OAL, 15⁄8" (4.1cm) langt håndtak, 11⁄8" (2.8cm) bred tommelpute.

Mer...

Kundevurderinger for CROSSFIRE SHOOTING GEAR T3 MAGAZINE RELEASE LEVER

Antall vurderinger: 8
Fra brownells.com: 8
Gjennomsnittsvurdering: 4,8

Great Addition! (27.06.2011)

This was a great addition to my Ruger 10/22 compact! It follows the contours of the trigger guard much better than the Tactical Solutions brand, and doesnt wobble near as much (none really). Mags hold in firmly and release with ease. Only takes a small adjustment with my trigger hand/finger to release/insert a mag. Only four stars because I havent had the chance to use it at the range yet.

A huge improvement over factory (14.08.2011)

Makes releasing the magazine easy for right- or left-handed shooters with just the use of the trigger finger. Installation took less than 5 minutes.

Affordable & Fast (15.10.2011)

This is a great item if you're looking to improve your magazine reload time. Magazine drops free every time even when empty on my standard 10/22 carbine. Conforms nicely to the trigger housing. Ambidextrous. Easy to install: unload rifle, remove the barrel band, barrel retainer screw, slightly depress the circular magazine retainer, remove the stock magazine release, insert the new one, release the circular magazine retainer and you're done. No tools required for installation other than what's needed to get the barrel/receiver out.

I did find the edges a little sharp for my liking. A few minutes with some fine sandpaper changed that. I also decided to dremel the portion of the release near the bolt catch lever thingie to give me a little more clearance in that area because I thought it did slightly interfere with that.

I installed it in conjunction with my Tapco Intrafuse stock and works just fine. I also installed a Volquartsen bolt release (a must-have in my mind) and it does not interfere with that in any way.

The release sits about where my first joint of my extended index finger is. It would be better in ergonomics for my size hands if it rested about .5" to .75" forward of where it currently sits. However, it's in a good spot for children and women with smaller hands.

Overall, no major complaints. 5 stars is a near impossible task in my mind and gave it 4 for the reasons listed above. I plan to buy another some time in the future.

Good fit and function (17.01.2012)

Drops right in. Fits nicely around trigger guard and looks great. I really like the widen portion that allows for easy 1 handed release. Only set back is it makes it hard to actuate bolt catch, especially with gloves on, but its nothing I can't live with.

The Best Choice (07.05.2012)

I looked at a lot of other mag releases and opted for this one for several reasons. First, it places the release at your fingertips where it belongs. Second, it is a stronger design because most of the other ones are long and thin, creating a "perfect storm" for breaking them, especially in a competition environment where the adrenaline is flowing. Third, the polymer is just plain indestructible. Throw in the fact that the price is less expensive than most other choices, and it's a no-brainer.

Excellent, fast with all stocks (08.02.2013)

Put it on my 10/22 with a pistol grip stock (Blackhawk). The Tactical Solutions release which I had on the gun in the factory stock didn't leave my fingers any room to work it! I love the TacSol release, but not on that stock.

Installed the PWS release, now the operation is the same as dropping the mag on my AK with a Power Custom magazine release. My only complaint is that the edges are a little bit sharp.

Outstanding Upgrade (11.07.2016)

Installed this on a 10/22 used occasionally for Steel Challenge competition. This is maybe the best upgrade you can make to a 10/22 that needs to be reloaded often and relatively quickly, especially considering the price.

Some may say it's not the flashiest mag release available and they'd be right. But for folks who are more concerned with function over form it's perfect. The mags lock in tight, both BX-1's and BX-25's, and drop free with the push of your index finger. It does not get in the way of or interfere with the regular function of the rifle in any way.

In the end this is a five star, two thumbs up product...

Easy install (16.10.2016)

I installed one in my Ruger Charger and I am very happy. Fit was drop in no problem ,great fit ,easy to operate .

Les 8 flere anmeldelser fra brownells.com

399 399 1 NOK

Produktnr.: 100006639
CROSSFIRE SHOOTING GEAR T3 MAGAZINE RELEASE LEVER
Produsentnr.: R1022MRL 812254022277 Utvidet spak har en bred, ambidekster tommelpute som lar deg slippe magasinet uten å endre grep eller skytestilling. Aktiveres enkelt med bare avtrekkerfingeren, slik at du kan slippe magasinet uten å famle. Konstruert for ikke å slippe magasinet ved et uhell. Ergonomisk formet, støpt fra lett, men holdbar polymer. Passer direkte inn.

399 NOK 43 kr 399,00 *

Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA

Spesifikasjoner: Make: Ruger Modell: 10/22

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Attributes

Make: Ruger Modell: 10/22 Leveringsvekt: 0,027kg Frakthøyde: 8mm Fraktbredde: 117mm Fraktlengde: 150mm

Elementdetaljer

US eksport klassifisering: 0A501.x

Lets You Drop The Mag Without Breaking Your Grip

SPECS: Injection-molded polymer, matte black. 2½" (6.3cm) OAL, 15⁄8" (4.1cm) long lever arm, 11⁄8" (2.8cm) wide thumb pad.

Mer...

Lar Deg Slippe Magasinet Uten Å Bryte Grepet

SPECS: Injeksjonsstøpt polymer, matt svart. 2½" (6.3cm) OAL, 15⁄8" (4.1cm) langt håndtak, 11⁄8" (2.8cm) bred tommelpute.

Mer...

Kundevurderinger for CROSSFIRE SHOOTING GEAR T3 MAGAZINE RELEASE LEVER

Antall vurderinger: 8
Fra brownells.com: 8
Gjennomsnittsvurdering: 4,8

Great Addition! (27.06.2011)

A huge improvement over factory (14.08.2011)

Makes releasing the magazine easy for right- or left-handed shooters with just the use of the trigger finger. Installation took less than 5 minutes.

Affordable & Fast (15.10.2011)

Good fit and function (17.01.2012)

The Best Choice (07.05.2012)

Excellent, fast with all stocks (08.02.2013)

Outstanding Upgrade (11.07.2016)

Easy install (16.10.2016)

I installed one in my Ruger Charger and I am very happy. Fit was drop in no problem ,great fit ,easy to operate .

Les 8 flere anmeldelser fra brownells.com

Kunder kjøpte også
Alternativer

VOLQUARTSEN BLUE 10/22® BOLT RELEASE
RUGER® 10/22® BOLT RELEASE

VOLQUARTSEN

På lager

kr 299,00 *

4,6

VOLQUARTSEN EXACT EDGE EXTRACTOR
EXACT EDGE EXTRACTOR MKII, MKIII, MKIV, 10/22®

VOLQUARTSEN

På lager

kr 319,00 *

Ekstraktorer

TUFFER BUFFER BOLT BUFFER, 3-PAK
RUGER® 10/22® BOLT BUFFER

TUFFER BUFFER

Kommer til lager

kr 469,00 * kr 219,00 - kr 469,00*

4,4

PRO MAG 10/22® 9-22 MAG W/ NOMAD SLEEVE .22LR 10RD POLYMER BLACK
ARCHANGEL 9-22 RUGER 10/22® MAGAZINES

PRO MAG

På lager

kr 649,00 * kr 499,00 - kr 649,00*

Magazines

CLARK CUSTOM CLARK RUGER® 10/22® SPEED BOLT RELEASE
RUGER® 10/22® SPEED BOLT RELEASE

CLARK CUSTOM

På lager

kr 439,00 *

4,8

Logg inn

Glemt passord?
Registrere

CONNECT

NETTSTEDSKART

PRODUKTKATEGORIER

BESTILLING

KUNDE SERVICE

Velkommen!

Velkommen til Brownells.no, Norges ledende leverandør av våpenrelaterte produkter, våpendeler, børsemakerverktøy, ladeverktøy, ladeutstyr og ladekomponenter!

Vårt kundeløfte:

Uansett om du bare liker å skyte, har våpen som hobby, er børsemaker og reparerer våpen daglig eller bare eier et våpen er dette siden for deg! I over 75 år har skyttere, profesjonelle børsemakere, hobby utøvere, militæret, politiet og våpenreparatører kommet til Brownells for å finne produkter og deler av høy kvalitet. Hos oss finner du over 40 000 produkter inkludert unike våpendeler, tilbehør, børsemakerverktøy, ladeverktøy, ladeutstyr, komponenter, ammunisjon og andre produkter for å vedlikeholde, reparere eller oppgradere dine våpen.