Auto-oversatt beskrivelse (Beskrivelse - Produsent): Alle settene har en lys rød, fiberoptisk, fremsyn og fullt justerbar peep eller U-hakk bakfra. U-hakk, bakre siktet sett bruker det svært nøyaktige, 3-punktsmønsteret med to grønne fiberoptiske prikker bak for skarp kontrast og rask siktinnsamling under alle lysforhold. Mer...
Upgrade Your Factory Sights With Easy-To-See, Fiber Optics
All sets feature a bright red, fiber optic, front sight and fully adjustable peep or U-notch, rear sight. U-notch, rear sight sets use the highly accurate, 3-dot pattern with two green, fiber optic dots at the rear for sharp contrast and quick sight acquisition in all light conditions. No drilling or tapping required for most rifle models. Dovetailed front and rear sights may require minor fitting. High visibility, fast to pickup, sight systems for the Ruger® 10/22®. WGRS features low profile, guide receiver, peep sight and red, fiber optic, front sight.
SPECS: Aluminum, black anodized. Front - .530" high, 1⁄16" red fiber optic bead. Fits Ruger 10/22 only.
Mer...
Oppgrader fabrikkens synspunkter med lett å se, fiberoptikk
Alle settene har en lys rød, fiberoptisk, fremsyn og fullt justerbar peep eller U-hakk bakfra. U-hakk, bakre siktet sett bruker det svært nøyaktige, 3-punktsmønsteret med to grønne fiberoptiske prikker bak for skarp kontrast og rask siktinnsamling under alle lysforhold. Ingen boring eller tapping er nødvendig for de fleste riflemodeller. Dovetailed sikt foran og bak kan kreve mindre montering. Høy sikt, raskt å hente, siktsystemer for Ruger® 10 / 22®. WGRS har lavprofil, guidemottaker, kikkesikt og rødt, fiberoptisk fremsyn.
SPECS: Aluminium, svart anodisert. Front - .530 "høy, 1⁄16" rød fiberoptisk perle. Passer bare Ruger 10/22.
Mer...
Kundevurderinger for Ruger® 10/22® Fiber Optic WGRS-RU22 Fire Sights Red
Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 3,3
Great sight replacement(18.10.2009)
The rear peep combined with the front fiber optic are great for aging eyes when standard sights just don't stand out well enough. Instalation was easy. The hardest part was getting the 10/22 factory front sight out. Just required extra tapping to drift it out. The rear peep is adjustable for windage and elevation by separate screws.
good value(14.03.2010)
These are great sights for older eyes that have trouble picking up the fine Ruger sights. But the screws on my sight come loose easily. Not the base but the screws for adjustment of the peep. Usually with less than fifty rounds fired. The screws are very fine for teflon tape and I don't want to locktite them. Otherwise an improvement over factory sights.
Fire Sights with rear peep aperture(05.05.2010)
My 10-22 used to sit in the gun cabinet most of the time with its awful stock open sights. The first try with these Williams fire sights I was knocking out the center of the target at 50yds with tight groups. The elevation and windage set screw loosened up, however within 30 rounds, just like a previous reviewer described. I think it needs a little blue loctite 246 on the threads just to help it out. Really had to wail on the stock 10-22 sights to remove them. Good idea to use a brass drift, and clamp and support the stock to a sturdy bench to prevent damage to the rifle.
Williams Aperature site.(11.04.2011)
Set screw in dovetail broke off putting in gun case after first range session. Horrible site. Not recommended.
Good plinking sight(22.07.2012)
Bright fast sight. Covers a lot of small varmint targets. Great sight picture but the set screws loosened and I lost the peep assembly. I will buy another and glue all the set screws at sighting in.
"Cheap design"(28.10.2013)
Easy enough to install and the peep with the firesight is easier to see,however after about 15 rounds the rear sight fell off. I even used locktite. The dovetail is not closely enough machined. I ended up using JB weld after I set the sights on target. There will no longer be any adjustment but it's not falling off. It's fine for my bugout Ruger 10/22 takedown.
Excellent Sights(17.01.2015)
These sights are excellent! They are very easy to install, and to address some of the problems encountered in earlier reviews, let's get back to basics. When removing a dovetailed sight, front or left...drift from left to right, and instal from right to left. When putting screws in to mount any sights install them with purple LocTight. (It's made for this purpose. If you are having trouble with the adjustment screws losing, install them with beeswax. To the one fellow who said that the mounting screw broke off...do not over-tighten, and you will be fine. In short these are well made sights, and deserve a good rating.
962633300 Ruger® 10/22® Fiber Optic WGRS-RU22 Fire Sights Red Produsentnr.: 63330053500633308 Alle settene har en lys rød, fiberoptisk, fremsyn og fullt justerbar peep eller U-hakk bakfra. U-hakk, bakre siktet sett bruker det svært nøyaktige, 3-punktsmønsteret med to grønne fiberoptiske prikker bak for skarp kontrast og rask siktinnsamling under alle lysforhold. Ingen boring eller tapping er nødvendig for de fleste riflemodeller. Dovetailed sikt foran og bak kan kreve mindre montering. Høy sikt, raskt å hente, siktsystemer for Ruger® 10 / 22®. WGRS har lavprofil, guidemottaker, kikkesikt og rødt, fiberoptisk fremsyn.
Farge:
Red
Make:
Ruger
Modell:
10/22
Style:
Fiber Optic
Elementdetaljer
Made in USA
US eksport klassifisering: 0A501.y.3.
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Upgrade Your Factory Sights With Easy-To-See, Fiber Optics
All sets feature a bright red, fiber optic, front sight and fully adjustable peep or U-notch, rear sight. U-notch, rear sight sets use the highly accurate, 3-dot pattern with two green, fiber optic dots at the rear for sharp contrast and quick sight acquisition in all light conditions. No drilling or tapping required for most rifle models. Dovetailed front and rear sights may require minor fitting. High visibility, fast to pickup, sight systems for the Ruger® 10/22®. WGRS features low profile, guide receiver, peep sight and red, fiber optic, front sight.
SPECS: Aluminum, black anodized. Front - .530" high, 1⁄16" red fiber optic bead. Fits Ruger 10/22 only.
Mer...
Oppgrader fabrikkens synspunkter med lett å se, fiberoptikk
Alle settene har en lys rød, fiberoptisk, fremsyn og fullt justerbar peep eller U-hakk bakfra. U-hakk, bakre siktet sett bruker det svært nøyaktige, 3-punktsmønsteret med to grønne fiberoptiske prikker bak for skarp kontrast og rask siktinnsamling under alle lysforhold. Ingen boring eller tapping er nødvendig for de fleste riflemodeller. Dovetailed sikt foran og bak kan kreve mindre montering. Høy sikt, raskt å hente, siktsystemer for Ruger® 10 / 22®. WGRS har lavprofil, guidemottaker, kikkesikt og rødt, fiberoptisk fremsyn.
SPECS: Aluminium, svart anodisert. Front - .530 "høy, 1⁄16" rød fiberoptisk perle. Passer bare Ruger 10/22.
Mer...
Kundevurderinger for Ruger® 10/22® Fiber Optic WGRS-RU22 Fire Sights Red
Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 3,3
Great sight replacement(18.10.2009)
The rear peep combined with the front fiber optic are great for aging eyes when standard sights just don't stand out well enough. Instalation was easy. The hardest part was getting the 10/22 factory front sight out. Just required extra tapping to drift it out. The rear peep is adjustable for windage and elevation by separate screws.
good value(14.03.2010)
These are great sights for older eyes that have trouble picking up the fine Ruger sights. But the screws on my sight come loose easily. Not the base but the screws for adjustment of the peep. Usually with less than fifty rounds fired. The screws are very fine for teflon tape and I don't want to locktite them. Otherwise an improvement over factory sights.
Fire Sights with rear peep aperture(05.05.2010)
My 10-22 used to sit in the gun cabinet most of the time with its awful stock open sights. The first try with these Williams fire sights I was knocking out the center of the target at 50yds with tight groups. The elevation and windage set screw loosened up, however within 30 rounds, just like a previous reviewer described. I think it needs a little blue loctite 246 on the threads just to help it out. Really had to wail on the stock 10-22 sights to remove them. Good idea to use a brass drift, and clamp and support the stock to a sturdy bench to prevent damage to the rifle.
Williams Aperature site.(11.04.2011)
Set screw in dovetail broke off putting in gun case after first range session. Horrible site. Not recommended.
Good plinking sight(22.07.2012)
Bright fast sight. Covers a lot of small varmint targets. Great sight picture but the set screws loosened and I lost the peep assembly. I will buy another and glue all the set screws at sighting in.
"Cheap design"(28.10.2013)
Easy enough to install and the peep with the firesight is easier to see,however after about 15 rounds the rear sight fell off. I even used locktite. The dovetail is not closely enough machined. I ended up using JB weld after I set the sights on target. There will no longer be any adjustment but it's not falling off. It's fine for my bugout Ruger 10/22 takedown.
Excellent Sights(17.01.2015)
These sights are excellent! They are very easy to install, and to address some of the problems encountered in earlier reviews, let's get back to basics. When removing a dovetailed sight, front or left...drift from left to right, and instal from right to left. When putting screws in to mount any sights install them with purple LocTight. (It's made for this purpose. If you are having trouble with the adjustment screws losing, install them with beeswax. To the one fellow who said that the mounting screw broke off...do not over-tighten, and you will be fine. In short these are well made sights, and deserve a good rating.