Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

BROWNELLS
UNIVERSAL BUTT PLATE LARGE

080003977
Speed up the restoration of that classic shotgun or rifle by replacing a worn, chipped, or cracked buttplate with an affordable, grind-to-fit replacement of moldable polyurethane resin. Durable resin looks and feels like the hard rubber, Bakelite, or black plastic used for the original buttplates on many of these guns, and will not shrink, swell, or crack over time. Proprietary molding process uses the highest-quality molds engineered to prevent unsightly “flash” and air bubbles on the finished product. Grinds easily without flaking or fracturing. Includes fine-line, horizontal serrations often found on period buttplates, but without the tricky borders that make grinding the sides difficult. Heat briefly in boiling water or microwave to soften the resin so it can be molded to the contour of your stock; the shape sets up well once cooled and is extremely durable. Drilled and counterbored to accept two #12 buttplate screws, available separately.

SPECS: Molded polyurethane resin, black. Fitting required. Large - 1-7⁄8" (4.8cm) wide, 5-7⁄16" (13.8cm). 3” (7.6cm) hole spacing.

419 419 1 NOK
Produktnr.: 080003977
BROWNELLS UNIVERSAL LARGE BUTT PLATE BLACK POLYMER
Produsentnr.: B333M Akselerer restaureringen av den klassiske haglen eller riflen ved å erstatte en slitt, avskallet eller sprukket kolbekappe med en rimelig, tilpassbar erstatning av formbart polyuretan resin. Det holdbare resinet ser ut og føles som hardgummi, bakelitt eller svart plast brukt for de originale kolbekappene på mange av disse våpnene, og vil ikke krympe, svelle eller sprekke over tid. Vår proprietære støpeprosess bruker de høyeste kvalitetsformene konstruert for å forhindre stygg "flash" og luftbobler på det ferdige produktet. Lar seg enkelt slipes uten å flakse eller sprekke. Inkluderer fine, horisontale riller som ofte finnes på kolbekapper fra perioden, men uten de vanskelige kantene som gjør det krevende å slipe sidene. Varm kort opp i kokende vann eller mikrobølgeovn for å mykne resin slik at det kan formes etter konturen på kolben din; formen setter seg godt når den er avkjølt og er ekstremt holdbar. Boret og forsenket for å akseptere to #12 kolbekappeskruer, som selges separat.
419 NOK 140 kr 419,00 *
Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA
Spesifikasjoner: Finish: Black Make: Universal Rifles, Universal Shotguns Material: Polymer Size: 5 7/16

Attributes

Finish: Black Make: Universal Rifles,Universal Shotguns Material: Polymer Size: 5 7/16 Leveringsvekt: 0,068kg Frakthøyde: 5mm Fraktbredde: 104mm Fraktlengde: 168mm

Elementdetaljer

Made in USA




Speed up the restoration of that classic shotgun or rifle by replacing a worn, chipped, or cracked buttplate with an affordable, grind-to-fit replacement of moldable polyurethane resin. Durable resin looks and feels like the hard rubber, Bakelite, or black plastic used for the original buttplates on many of these guns, and will not shrink, swell, or crack over time. Proprietary molding process uses the highest-quality molds engineered to prevent unsightly “flash” and air bubbles on the finished product. Grinds easily without flaking or fracturing. Includes fine-line, horizontal serrations often found on period buttplates, but without the tricky borders that make grinding the sides difficult. Heat briefly in boiling water or microwave to soften the resin so it can be molded to the contour of your stock; the shape sets up well once cooled and is extremely durable. Drilled and counterbored to accept two #12 buttplate screws, available separately.

SPECS: Molded polyurethane resin, black. Fitting required. Large - 1-7⁄8" (4.8cm) wide, 5-7⁄16" (13.8cm). 3” (7.6cm) hole spacing.

Nyhetsbrev