Over 300 000 kunder - vi takker dere!

40 000+ produkter for jakt og skytesport

Gjenopprett plunger-røret med Brownells 1911 Plunger Tube Reamer Set. 🔧 Ekstra lange reamers for optimal fjærplass og drift!

BROWNELLS PLUNGER TUBE REAMER - BROWNELLS 1911 PLUNGER TUBE REAMER SET

050806020559 080771000

Attributes

  • Make: 1911
  • Leveringsvekt: 0,068kg
  • Frakthøyde: 61mm
  • Fraktbredde: 61mm
  • Fraktlengde: 226mm
  • UPC: 050806020559

Elementdetaljer

Made in USA
  • Spesifikasjoner:
  • Make: 1911
499 499 1 NOK
499 NOK kr 499,00

Priser inkl. mva. pluss levering

Produktnr.: 080771000

050806020559 Ekstra lange reamers gjenoppretter riktig indre diameter (I.D.) på plunger-røret etter staking - og gir tilstrekkelig fjærplass for positiv drift.
Kommer til lager

Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.

1
2
3
4
5
6
7
8
9
10+

Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.

  • Spesifikasjoner:
  • Make: 1911

Beskrivelse:

Vis original (engelsk)
Raskere, Tettere Installasjon; Skadefri Fjerning
Ekstra lange reamers gjenoppretter riktig indre diameter (I.D.) på plunger-røret etter staking - og gir tilstrekkelig fjærplass for positiv drift.

Attributes

  • Make: 1911
  • Leveringsvekt: 0,068kg
  • Frakthøyde: 61mm
  • Fraktbredde: 61mm
  • Fraktlengde: 226mm
  • UPC: 050806020559

Elementdetaljer

Made in USA

Kundeanmeldelser

Kundevurderinger (3)

3,3 / 5
Litt anbefalt

Brownells USA Not a Reamer 29.08.2017

1st off, they are not reamers! They are DRILL BITS. Care & a light touch must be used to keep them from biting into the steel. Drills are made for high speed. As soon as I tried to use them, both came loose from the handles. I had to super glue them into the handles to get them to work. However if used lightly and take your time, they will work. Brownells needs to fix the handle problem and change the heading from "Reamers" to "Hand drills". Kind of pricey for 2 drill bits with plastic handles, but they do work. As 35 yrs. as a Engineer/Tool & Die Maker, I know what I'm talking about.

Anbefalt med reservasjoner

Brownells USA Could be better II. 02.02.2016

The reamers are very sharp. The issue was the shaft attached in the handle broke free easily. I used the handle to hold the shaft straight, I applied slight pressure, and turned the shaft with vise grips attached to the drill shaft. I corrected the problem using a 3 square file to cut channels lengthwise inside the handle. Then I cut grooves around the shaft. I drilled small holes in handle then cleaned everything with lacquer thinner. I pushed epoxy into the center hole until it flowed out the small drilled holes. Then I pushed the shaft back in and clamped it. Works well.

Kunder kjøpte også

Tilbake til toppen