Din handlekurv er tom.

Handlekurv

WILLIAMS GUN SIGHT
MARLIN 336 WGRS RECEIVER REAR SIGHT

053506702008 962000019

In most cases, these sights utilize dovetail or existing screw holes on top of receiver to give guns the advantage of peep sights.

SPECS: Aluminum, black, anodized. Peep height is approximately the same as a 3⁄16" (4.8mm) Open Sight Blade.

Mer...

I de fleste tilfeller benytter disse siktepunktene seg av svalehale eller eksisterende skruehull på toppen av mottakeren for å gi våpen fordelen av dioptersikter.

SPECS: Aluminium, sort, anodisert. Siktehøyden er omtrent den samme som en 3⁄16" (4.8mm) åpent sikteblad.

Mer...

Kundevurderinger for WILLIAMS GUN SIGHT MARLIN 336 ADJUSTABLE PEEP WGRS RECEIVER REAR SIGHT BLACK

Antall vurderinger: 3
Fra brownells.com: 3
Gjennomsnittsvurdering: 3,3

Nice, cheap, wont work w/factory bead (24.11.2009)

I bought this to get a little more precision than tapping the factory dovetail rear buckhorn with a ball-pean hammer. If you use this with the factory front bead/blade, you will shoot 6 inches high at 25 yards. There is no way to lower this sight to bring that bullet strike down any further. You MUST have the Williams front sight to go with it. Apparently, Brownell does not carry it, and there is no information about it at Williams either. There is a set for $10 more. I don't know why the rear sight is even offered by itself.

Great addition for accuracy (05.07.2011)

Although as mentioned, front sight needs to be changed, sight works great. Adjustments are easy and a few clicks has you on target in no time.

Installed on a camp carbine, works great (26.07.2011)

There is an incorrect answer on the FAQ page of this product. Marlin Camp Carbines (both 9mm and 45 ACP) share the same scope base as the 336, and as such this product WILL fit on a Camp Carbine. In fact, I've seen this sight on a 336, and it actually fits better on a Camp Carbine: on a 336 the sight hangs off the back of the reciever if it's mounted in the back holes, which looks bad but doesn't quite interfere with the hammer. Some people mount it in the front holes, but that's pretty far away from your eye. IMHO, a skinner sight would work (and look) better on a 336.

But for my Camp 9, this sight is perfect. As everyone should know by now, a new front sight is required, but if you purchase the set, you get a Williams front Firesight to go with it. I'm a big fan: it's basically a battery-less red dot.

I was surprised to find the adjustment scale stamped on the RIGHT, instead of the left side. (I should have noticed this in the pictures.) Some people might take issue with this, since it makes more sense for it to be on the left side, where your head and eyes are. Williams FP sights have the scale stamped on the left, so I wonder why they chose to do the opposite for this sight. I'm not complaining, because I'm a southpaw. I wish they made a "left-handed" Foolproof sight.

One minor disappointment: the adjustment scale is NOT painted. Some pictures online show that it is, so perhaps they used to be. I found a teeny brush and some white paint and fixed that myself.

Aperture is the standard threaded kind and can be replaced with all sorts of different sizes. Or keep it off and use the rear sight as a ghost ring.

Happy shooting!

Les 3 flere anmeldelser fra brownells.com

799 799 1 NOK

Produktnr.: 962000019
WILLIAMS GUN SIGHT MARLIN 336 ADJUSTABLE PEEP WGRS RECEIVER REAR SIGHT BLACK
Produsentnr.: 70200 053506702008 I de fleste tilfeller benytter disse siktepunktene seg av svalehale eller eksisterende skruehull på toppen av mottakeren for å gi våpen fordelen av dioptersikter.

799 NOK 4 kr 799,00 *

Leveringstid ca. 14-21 dager.
4 stk. på lageret i USA

Spesifikasjoner: Farge: Black Make: Marlin Modell: 336 Style: Adjustable, Peep Sights

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Attributes

Farge: Black Make: Marlin Modell: 336 Style: Adjustable,Peep Sights Leveringsvekt: 0,045kg Frakthøyde: 13mm Fraktbredde: 122mm Fraktlengde: 180mm

Elementdetaljer

Made in USA

In most cases, these sights utilize dovetail or existing screw holes on top of receiver to give guns the advantage of peep sights.

SPECS: Aluminum, black, anodized. Peep height is approximately the same as a 3⁄16" (4.8mm) Open Sight Blade.

Mer...

I de fleste tilfeller benytter disse siktepunktene seg av svalehale eller eksisterende skruehull på toppen av mottakeren for å gi våpen fordelen av dioptersikter.

SPECS: Aluminium, sort, anodisert. Siktehøyden er omtrent den samme som en 3⁄16" (4.8mm) åpent sikteblad.

Mer...

Kundevurderinger for WILLIAMS GUN SIGHT MARLIN 336 ADJUSTABLE PEEP WGRS RECEIVER REAR SIGHT BLACK

Antall vurderinger: 3
Fra brownells.com: 3
Gjennomsnittsvurdering: 3,3

Nice, cheap, wont work w/factory bead (24.11.2009)

Great addition for accuracy (05.07.2011)

Although as mentioned, front sight needs to be changed, sight works great. Adjustments are easy and a few clicks has you on target in no time.

Installed on a camp carbine, works great (26.07.2011)

Les 3 flere anmeldelser fra brownells.com

Logg inn

Glemt passord?
Registrere

CONNECT

NETTSTEDSKART

PRODUKTKATEGORIER

BESTILLING

KUNDE SERVICE

Velkommen!

Velkommen til Brownells.no, Norges ledende leverandør av våpenrelaterte produkter, våpendeler, børsemakerverktøy, ladeverktøy, ladeutstyr og ladekomponenter!

Vårt kundeløfte:

Uansett om du bare liker å skyte, har våpen som hobby, er børsemaker og reparerer våpen daglig eller bare eier et våpen er dette siden for deg! I over 75 år har skyttere, profesjonelle børsemakere, hobby utøvere, militæret, politiet og våpenreparatører kommet til Brownells for å finne produkter og deler av høy kvalitet. Hos oss finner du over 40 000 produkter inkludert unike våpendeler, tilbehør, børsemakerverktøy, ladeverktøy, ladeutstyr, komponenter, ammunisjon og andre produkter for å vedlikeholde, reparere eller oppgradere dine våpen.