Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

EGW
LPA-LOW LEUPOLD DELTAPONT PRO SIGHT MOUNT

841370115662 296000678
EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount does not fit: Rock Island 1911s EAA / Tanfoglio Witness' with LPA/Bomar style rear sights (EAA Super Sight)
0 0 1 NOK
Produktnr.: 296000678
EGW LPA-LOW LEUPOLD DELTAPOINT PRO SIGHT MOUNT
Produsentnr.: 49403 841370115662 EGW rødpunktsikter er ment for å installeres fra venstre mot høyre (med løpet pekende fremover). Skinnen har en progressiv avsmalning for å tillate enklere installasjon. Bare fjern baksiktet på våpenet ditt og erstatt det med EGW-monteringen for å kunne montere ditt Leupold DeltaPoint Pro, JPoint, Redfield Accelerator eller Optima rødpunktsikte. Du kan når som helst ta av monteringen og sette tilbake baksiktet. Monteringsutstyr inkludert. Installasjonsinstruksjoner Fjern baksiktet* Installer EGW Siktemonteringen i skinnen Stram sett-skruen (hvis aktuelt) Plasser rødpunktsiktet på EGW Siktemonteringen (ved å legge en liten papirbit mellom rødpunktsiktet og siktemonteringen vil gjøre fjerningen enklere og vil holde Loctite unna rødpunktsiktet.) Påfør blå Loctite på de medfølgende monteringsskruene Stram monteringsskruene til 15in/lbs Modifisering av våpenet ditt kan oppheve produsentens garanti. Dette produktet bør installeres og sjekkes av en kvalifisert børsemaker. Ingen ansvar uttrykkes eller antydes for skade eller skade som kan oppstå som følge av feil installasjon eller bruk av dette produktet. Denne monteringen passer ikke: Rock Island 1911s EAA / Tanfoglio Vitner med LPA/Bomar stil baksikter (EAA Super Sight)
Varsle ved tilgjengelighet
Ikke tilgjengelig.
Spesifikasjoner: Farge: Black Make: Magnum Research, IWI, EAA Material: Aluminum Modell: SAR K2P, Baby Desert Eagle, Witness Elite Match, Jericho 941 Number of Bases: 1-Piece Style: Tactical

Attributes

Farge: Black Make: EAA,IWI,Magnum Research Material: Aluminum Modell: Witness Elite Match,Baby Desert Eagle,SAR K2P,Jericho 941 Number of Bases: 1-Piece Style: Tactical Leveringsvekt: 0,045kg Frakthøyde: 25mm Fraktbredde: 76mm Fraktlengde: 140mm

Elementdetaljer

Made in USA



EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount does not fit: Rock Island 1911s EAA / Tanfoglio Witness' with LPA/Bomar style rear sights (EAA Super Sight)
Nyhetsbrev