Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge
841370116751 296000564
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mounts fits: Baby Desert Eagle (Post 2006) EAA Witness Elite Match This mount does not fit: Rock Island 1911s Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
999 999 1 NOK
Produktnr.: 296000564
EGW H&K USP TRIJICON RMR SIGHT MOUNT
Produsentnr.: 49505 841370116751 Materiale: 7075 Aluminium Belegg: Matt svart hardcoat Samlet lengde: 1.780" Samlet bredde: 1.1" Monteringsutstyr: (2) 6-32 flat hode skruer, (1) 6-32 X 3/16 settskrue Rødpunktsikte tilpasning: Trijicon RMR, Holosun HS507C Dette monteringssettet passer til: Desert Eagle (Etter 2006) EAA Witness Elite Match Dette monteringssettet passer ikke til: Rock Island 1911s Enkelt fjern baksiktet på pistolen din og erstatt det med vårt monteringssett for å montere ditt Trijicon RMR rødpunktsikte. Ingen modifikasjoner er nødvendige. Du kan når som helst ta av vårt monteringssett og erstatte ditt baksikte. Monteringsutstyr inkludert. Installasjonsinstruksjoner Fjern baksiktet* Installer EGW Siktemonteringen i skinnen Stram til settskruen (hvis aktuelt) Plasser rødpunktsiktet på EGW Siktemonteringen (å legge en liten bit papir mellom rødpunktsiktet og siktemonteringen vil gjøre det enklere å fjerne og vil holde Loctite borte fra rødpunktsiktet.) Påfør blå Loctite på de medfølgende monteringsskruene Dra monteringsskruene til med et moment på 15in/lbs 2 Flat Head Cap Screws - Levert for Trijicon RMR Skruene som følger med dette monteringssettet krever en 5/64'' unbrakonøkkel for installasjon.
999 NOK 2 kr 999,00 *
Leveringstid ca. 14-21 dager.
2 stk. på lageret i USA
Spesifikasjoner: Farge: Black Make: Heckler & Koch Material: Aluminum Modell: USP Number of Bases: 1-Piece Style: Tactical

Attributes

Farge: Black Make: Heckler & Koch Material: Aluminum Modell: USP Number of Bases: 1-Piece Style: Tactical Leveringsvekt: 0,033kg Frakthøyde: 25mm Fraktbredde: 89mm Fraktlengde: 140mm

Elementdetaljer

Made in USA




Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mounts fits: Baby Desert Eagle (Post 2006) EAA Witness Elite Match This mount does not fit: Rock Island 1911s Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
Nyhetsbrev