Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

BROWNELLS HIGH-SPEED STEEL CUTTING KITS FOR LATHES - 3/8" TURNING KIT


Auto-oversatt beskrivelse (Beskrivelse - Produsent): Verktøysett inkluderer herdet stålverktøyholdere og høyhastighetsstålinnsatser for dreining, gjenging, profilering og avskjæring. Innleggene er T-15 High Speed Steel (HSS) herdet til Rc 65-67, og avslutter deretter bakken på alle sider. Mer...

080000835
Tool Holders & Inserts For Turning
Tooling kits include hardened steel toolholders and high speed steel inserts for turning, threading, profiling, and cut-off work. Inserts are T-15 High Speed Steel (HSS) hardened to Rc 65-67, then finish ground on all sides. They deliver excellent slow speed performance, precision interrupted cuts, and a smooth finish on stainless steel, Inconel, Monel, exotic metals, and plastics. Square shank toolholders and boring bars are CNC machined from 4140/4142 steel bar stock, hardened to Rc 48-50, and then black oxide coated to resist corrosion. Includes two ¼" square shank bars, one right hand (RH) bar and one left hand (LH) bar, a 3/8" shank boring bar, plus two CEMW-2-1.5-1 boring bar inserts and three CCMW-2-1.5-1 square shank bar inserts.

SPECS: One right hand bar, one double-ended left hand bar, .375" shank, 3.5" long, double ended for 50° side cutting edge angle, boring bar, .375" shank, 5" long, .188" wide, full length flat, .365" minimum bore. Boring Bar Inserts - two T-15 HSS CEMW-2-1.5-1 inserts, 20° positive, .250 IC, .093 thick, .110 hole, .146 opening, .015 radius. Right/Left Bar Inserts - three T-15 HSS CCMW-2-1.5-1 inserts, 7° positive, .250 IC, .093 thick, .110 hole, .146 opening, .015 radius. Includes two MS-1152S screws, four MS-1153 screws and one T-7 wrench.

BROWNELLS
2806 2806 1 NOK
Sale
080000835
3/8" Turning RH/LH BB Kit Verktøysett inkluderer herdet stålverktøyholdere og høyhastighetsstålinnsatser for dreining, gjenging, profilering og avskjæring. Innleggene er T-15 High Speed Steel (HSS) herdet til Rc 65-67, og avslutter deretter bakken på alle sider. De gir utmerket ytelse med treg hastighet, presisjonsavbrutte kutt og en jevn finish på rustfritt stål, Inconel, Monel, eksotiske metaller og plast. Firkantede skaftverktøyholdere og kjedelige stenger er CNC-maskinert fra 4140/4142 stålstangmasse, herdet til Rc 48-50, og deretter svart oksidbelagt for å motstå korrosjon. Inkluderer to ¼ "firkantede skaftstenger, en høyre hånd (RH) bar og en venstre hånd (LH) bar, en 3/8" skaftborestang, pluss to CEMW-2-1.5-1 kjedelige barinnsatser og tre CCMW-2 -1,5-1 firkantede skaftstenger.
1964 NOK 4 kr 1 964,00 * kr 2 806,00

4 på lager

Elementdetaljer

Made in USA




Tool Holders & Inserts For Turning
Tooling kits include hardened steel toolholders and high speed steel inserts for turning, threading, profiling, and cut-off work. Inserts are T-15 High Speed Steel (HSS) hardened to Rc 65-67, then finish ground on all sides. They deliver excellent slow speed performance, precision interrupted cuts, and a smooth finish on stainless steel, Inconel, Monel, exotic metals, and plastics. Square shank toolholders and boring bars are CNC machined from 4140/4142 steel bar stock, hardened to Rc 48-50, and then black oxide coated to resist corrosion. Includes two ¼" square shank bars, one right hand (RH) bar and one left hand (LH) bar, a 3/8" shank boring bar, plus two CEMW-2-1.5-1 boring bar inserts and three CCMW-2-1.5-1 square shank bar inserts.

SPECS: One right hand bar, one double-ended left hand bar, .375" shank, 3.5" long, double ended for 50° side cutting edge angle, boring bar, .375" shank, 5" long, .188" wide, full length flat, .365" minimum bore. Boring Bar Inserts - two T-15 HSS CEMW-2-1.5-1 inserts, 20° positive, .250 IC, .093 thick, .110 hole, .146 opening, .015 radius. Right/Left Bar Inserts - three T-15 HSS CCMW-2-1.5-1 inserts, 7° positive, .250 IC, .093 thick, .110 hole, .146 opening, .015 radius. Includes two MS-1152S screws, four MS-1153 screws and one T-7 wrench.