Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge
841370113958 296000698
Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs *Rear sight pusher tool highly recommended* The screws that are included with this mount require a 5/64'' allen wrench for installation. This mount does not fit: Smith & Wesson M&P C.O.R.E Series (Already optics ready) Smith & Wesson M&P Shield EZ .380 Smith & Wesson M&P .22 Compact Smith & Wesson SW9VE Smith & Wesson SW40VE Smith and Wesson's rear sight dovetails are known to vary in dimensions. Our sights are made to the same tolerances. Some users may have trouble installing our plate on their slide due to the varying tolerances in your slides. Please keep this in mind when ordering. Our return policy does allow for returns of unused and undamaged parts. These mounts should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.  
999 999 1 NOK
Produktnr.: 296000698
EGW SIGHT MOUNT FOR VORTEX RAZOR FITS S&W M&P BLACK
Produsentnr.: 49445 841370113958 Fjern ganske enkelt baksiktet på pistolen din og erstatt det med EGW-monteringen for å montere ditt Vortex Razor, C-More RTS eller STS rødpunktsikte. Du kan når som helst ta av monteringen og erstatte baksiktet. Monteringsutstyr inkludert. Installasjonsinstruksjoner Fjern baksiktet* Installer EGW Sight Mount i sporåpningen Stram til settskruen (hvis aktuelt) Plasser rødpunktsiktet på EGW Sight Mount (å legge en liten bit papir mellom rødpunktsiktet og siktemonteringen vil gjøre fjerningen enklere og vil holde Loctite borte fra rødpunktsiktet.) Påfør blå Loctite på de medfølgende monteringsskruene Dra til monteringsskruene med 15in/lbs *Verktøy for fjerning av baksikte anbefales på det sterkeste* Skruene som følger med denne monteringen krever en 5/64'' unbrakonøkkel for installasjon. Denne monteringen passer ikke: Smith & Wesson M&P C.O.R.E Series (Allerede optikk-klar) Smith & Wesson M&P Shield EZ .380 Smith & Wesson M&P .22 Compact Smith & Wesson SW9VE Smith & Wesson SW40VE Smith and Wessons baksiktespor er kjent for å variere i dimensjoner. Våre sikter er laget med samme toleranser. Noen brukere kan ha problemer med å installere vår plate på deres sleide på grunn av de varierende toleransene i deres sleider. Vennligst ha dette i tankene når du bestiller. Vår returpolicy tillater retur av ubrukte og uskadede deler. Disse monteringene bør installeres og sjekkes av en kvalifisert børsemaker. Ingen ansvar er uttrykt eller antydet for skade eller skade som kan oppstå som følge av feil installasjon eller bruk av dette produktet.
999 NOK 0 kr 999,00 *
Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.
Spesifikasjoner: Farge: Black Make: Smith & Wesson Material: Aluminum Modell: M&P Shield, SD40, M&P 2.0 Compact, SD9-VE, M&P 22 FS, M&P FS Number of Bases: 1-Piece Style: Tactical

Attributes

Farge: Black Make: Smith & Wesson Material: Aluminum Modell: M&P 2.0 Compact,M&P FS,SD40,SD9-VE,M&P 22 FS,M&P Shield Number of Bases: 1-Piece Style: Tactical Leveringsvekt: 0,045kg Frakthøyde: 25mm Fraktbredde: 76mm Fraktlengde: 140mm

Elementdetaljer

Made in USA



Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs *Rear sight pusher tool highly recommended* The screws that are included with this mount require a 5/64'' allen wrench for installation. This mount does not fit: Smith & Wesson M&P C.O.R.E Series (Already optics ready) Smith & Wesson M&P Shield EZ .380 Smith & Wesson M&P .22 Compact Smith & Wesson SW9VE Smith & Wesson SW40VE Smith and Wesson's rear sight dovetails are known to vary in dimensions. Our sights are made to the same tolerances. Some users may have trouble installing our plate on their slide due to the varying tolerances in your slides. Please keep this in mind when ordering. Our return policy does allow for returns of unused and undamaged parts. These mounts should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.  
Nyhetsbrev