Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

EGW
SAVAGE 301 TRIJICON RMR SIGHT MOUNT

841370117604 296000708
Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Trijicon RMR red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs The screws that are included with this mount require a 5/64'' allen wrench for installation.
0 0 1 NOK
Produktnr.: 296000708
EGW SAVAGE 301 TRIJICON RMR SIGHT MOUNT
Produsentnr.: 49539 841370117604 Fjern ganske enkelt baksiktet på våpenet ditt og erstatt det med EGW-monteringen for å montere ditt Trijicon RMR rødpunktsikte. Du kan når som helst ta av monteringen og sette tilbake baksiktet. Monteringsutstyr inkludert. Installasjonsinstruksjoner Fjern baksiktet* Installer EGW Sight Mount i sporåpningen Stram til skruen (hvis aktuelt) Plasser rødpunktsiktet på EGW Sight Mount (å legge en liten bit papir mellom rødpunktsiktet og siktemonteringen vil gjøre fjerningen enklere og vil holde Loctite borte fra rødpunktsiktet.) Påfør blå Loctite på de medfølgende monteringsskruene Trekk til monteringsskruene med 15in/lbs Skruene som følger med denne monteringen krever en 5/64'' unbrakonøkkel for installasjon.
Varsle ved tilgjengelighet
Ikke tilgjengelig.
Spesifikasjoner: Elevation: 0 MOA Farge: Black Make: Savage Arms Material: Aluminum Modell: 301 Number of Bases: 1-Piece Style: Picatinny Rail

Attributes

Elevation: 0 MOA Farge: Black Make: Savage Arms Material: Aluminum Modell: 301 Number of Bases: 1-Piece Style: Picatinny Rail Leveringsvekt: 0,045kg Frakthøyde: 25mm Fraktbredde: 76mm Fraktlengde: 140mm

Elementdetaljer

Made in USA



Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Trijicon RMR red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs The screws that are included with this mount require a 5/64'' allen wrench for installation.
Nyhetsbrev