Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

EGW
EAA SUPER SIGHT VORTEX RAZOR SIGHT MOUNT

841370114269 296000699
Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs The screws that are included with this mount require a 5/64'' allen wrench for installation. This mount fits: Elite Stock II with adjustable (LPA/Bomar style, shown above) rear sight Elite Stock III with adjustable (LPA/Bomar style, shown above) rear sight Hunter with adjustable (LPA/Bomar style, shown above) rear sight Limited Custom with adjustable (LPA/Bomar style, shown above) rear sight Limited Custom Xtreme with adjustable (LPA/Bomar style, shown above) rear sight Match Elite with adjustable (LPA/Bomar style, shown above) rear sight Match Xtreme with adjustable (LPA/Bomar style, shown above) rear sight P Match with adjustable (LPA/Bomar style, shown above) rear sight P Match Pro with adjustable (LPA/Bomar style, shown above) rear sight Stock II Xtreme with adjustable (LPA/Bomar style, shown above) rear sight Stock III Xtreme with adjustable (LPA/Bomar style, shown above) rear sight This mount does not fit: EAA / Tanfoglio Witness with fixed rear sight EAA / Tanfoglio Witness with Novak style adjustable rear sight, shown above
0 0 1 NOK
Produktnr.: 296000699
EGW EAA SUPER SIGHT VORTEX RAZOR SIGHT MOUNT
Produsentnr.: 49447 841370114269 Fjern enkelt baksiktet på våpenet ditt og erstatt det med EGW-monteringen for å montere ditt Vortex Razor, C-More RTS eller STS rødpunktsikte. Du kan når som helst ta av monteringen og sette tilbake baksiktet. Monteringsutstyr inkludert. Installasjonsinstruksjoner Fjern baksiktet* Installer EGW Sight Mount i skinnen Stram sett-skruen (hvis aktuelt) Plasser rødpunktsiktet på EGW Sight Mount (å legge en liten bit papir mellom rødpunktsiktet og siktemonteringen vil gjøre fjerning enklere og vil holde Loctite borte fra rødpunktsiktet.) Påfør blå Loctite på de medfølgende monteringsskruene Dra til monteringsskruene til 15in/lbs Skruene som følger med denne monteringen krever en 5/64'' unbrakonøkkel for installasjon. Denne monteringen passer til: Elite Stock II med justerbart (LPA/Bomar-stil, vist ovenfor) baksikte Elite Stock III med justerbart (LPA/Bomar-stil, vist ovenfor) baksikte Hunter med justerbart (LPA/Bomar-stil, vist ovenfor) baksikte Limited Custom med justerbart (LPA/Bomar-stil, vist ovenfor) baksikte Limited Custom Xtreme med justerbart (LPA/Bomar-stil, vist ovenfor) baksikte Match Elite med justerbart (LPA/Bomar-stil, vist ovenfor) baksikte Match Xtreme med justerbart (LPA/Bomar-stil, vist ovenfor) baksikte P Match med justerbart (LPA/Bomar-stil, vist ovenfor) baksikte P Match Pro med justerbart (LPA/Bomar-stil, vist ovenfor) baksikte Stock II Xtreme med justerbart (LPA/Bomar-stil, vist ovenfor) baksikte Stock III Xtreme med justerbart (LPA/Bomar-stil, vist ovenfor) baksikte Denne monteringen passer ikke: EAA / Tanfoglio Witness med fast baksikte EAA / Tanfoglio Witness med Novak-stil justerbart baksikte, vist ovenfor
Varsle ved tilgjengelighet
Ikke tilgjengelig.
Spesifikasjoner: Farge: Black Make: EAA Material: Aluminum Modell: Hunter, P Match Pro, P Match, Stock II Xtreme, Elite Stock II, Limite Custom Xtreme Number of Bases: 1-Piece Style: Tactical

Attributes

Farge: Black Make: EAA Material: Aluminum Modell: Elite Stock II,Stock II Xtreme,Limite Custom Xtreme,P Match,Hunter,P Match Pro Number of Bases: 1-Piece Style: Tactical Leveringsvekt: 0,045kg Frakthøyde: 25mm Fraktbredde: 76mm Fraktlengde: 140mm

Elementdetaljer

Made in USA



Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs The screws that are included with this mount require a 5/64'' allen wrench for installation. This mount fits: Elite Stock II with adjustable (LPA/Bomar style, shown above) rear sight Elite Stock III with adjustable (LPA/Bomar style, shown above) rear sight Hunter with adjustable (LPA/Bomar style, shown above) rear sight Limited Custom with adjustable (LPA/Bomar style, shown above) rear sight Limited Custom Xtreme with adjustable (LPA/Bomar style, shown above) rear sight Match Elite with adjustable (LPA/Bomar style, shown above) rear sight Match Xtreme with adjustable (LPA/Bomar style, shown above) rear sight P Match with adjustable (LPA/Bomar style, shown above) rear sight P Match Pro with adjustable (LPA/Bomar style, shown above) rear sight Stock II Xtreme with adjustable (LPA/Bomar style, shown above) rear sight Stock III Xtreme with adjustable (LPA/Bomar style, shown above) rear sight This mount does not fit: EAA / Tanfoglio Witness with fixed rear sight EAA / Tanfoglio Witness with Novak style adjustable rear sight, shown above
Nyhetsbrev