Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

EGW
CZ SHADOW 2 VORTEX VIPER/VENOM SIGHT MOUNT

841370116621 296000537
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
999 999 1 NOK
Produktnr.: 296000537
EGW CZ SHADOW 2 VORTEX VIPER/VENOM SIGHT MOUNT
Produsentnr.: 49298 841370116621 Materiale: 7075 Aluminium Belegg: Matt svart Hardcoat Total lengde: 1.811\" Total bredde: .99\" Monteringsutstyr: (2) 6-32 knappehodeskruer, (2) 6-32 flatkantet skruer, (1) 6-32 innstillingskrue Rødpunktsikte tilpasning: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGWs rødpunktsikter er ment å installeres fra venstre mot høyre (med munningen vendt fremover). Skinnen har en progressiv konus for å tillate enklere installasjon. Fjern ganske enkelt baksiktet på våpenet ditt og erstatt det med vår montering for å montere ditt Vortex Viper/Venom, Burris FastFire eller Docter rødpunktsikte. Ingen endringer er nødvendige. Du kan når som helst ta av vår montering og erstatte baksiktet. Monteringsutstyr inkludert. Installasjonsinstruksjoner Fjern baksiktet* Installer EGW Sight Mount i skinnen Stram innstillingskrue (hvis aktuelt) Plasser rødpunktsiktet på EGW Sight Mount (å legge en liten bit papir mellom rødpunktsiktet og monteringen vil gjøre det lettere å fjerne og vil holde Loctite unna rødpunktsiktet.) Påfør blå Loctite på de medfølgende monteringsskruene Dra til monteringsskruene til 15in/lbs 2 knappehodeskruer - Levert for Vortex Viper og Venom sikter 2 flatkantet skruer - Levert for Burris FastFire og Docter sikter Skruene som følger med denne monteringen krever en 5/64'' unbrakonøkkel for installasjon.
999 NOK 6 kr 999,00 *
Leveringstid ca. 14-21 dager.
6 stk. på lageret i USA
Spesifikasjoner: Farge: Black Make: CZ Material: Aluminum Modell: 75, Shadow, Shadow 2, SP-01 Shadow Number of Bases: 1-Piece Style: Tactical

Attributes

Farge: Black Make: CZ Material: Aluminum Modell: 75,Shadow,Shadow 2,SP-01 Shadow Number of Bases: 1-Piece Style: Tactical Leveringsvekt: 0,034kg Frakthøyde: 25mm Fraktbredde: 76mm Fraktlengde: 133mm

Elementdetaljer

Made in USA




Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
Nyhetsbrev