Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

EGW
CZ 75, 85, P-01, PCR LEUPOLD DELTAPOINT PRO SIGHT MOUNT

841370115914 296000677
Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount fits: CZ 75 CZ 75 SP-01 CZ 75 SP-01 Phantom CZ 75 SP-01 Shadow CZ 85 CZ 97B CZ 97D CZ P-01 CZ P-07 (may require fitting due to a variance in dovetail dimensions) CZ P-09 (may require fitting due to a variance in dovetail dimensions) CZ PCR (there will be a gap under the front of the adapter plate) Tristar P120
0 0 1 NOK
Produktnr.: 296000677
EGW CZ75, 85, P-01, PCR LEUPOLD DELTAPOINT PRO SIGHT MOUNT
Produsentnr.: 49402 841370115914 Fjern enkelt baksiktet på våpenet ditt og erstatt det med EGW-monteringen for å kunne montere ditt Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, eller Optima rødpunktsikte. Du kan når som helst ta av monteringen og sette tilbake baksiktet. Monteringsutstyr inkludert. Installasjonsinstruksjoner Fjern baksiktet* Installer EGW Sight Mount i svalehalen Stram sett skruen (hvis aktuelt) Plasser rødpunktsiktet på EGW Sight Mount (ved å legge en liten bit papir mellom rødpunktsiktet og siktemonteringen vil gjøre fjerningen enklere og vil holde Loctite borte fra rødpunktsiktet.) Påfør blå Loctite på de medfølgende monteringsskruene Dra til monteringsskruene til 15in/lbs Modifisering av våpenet ditt kan gjøre produsentens garanti ugyldig. Dette produktet bør installeres og sjekkes av en kvalifisert børsemaker. Ingen ansvar er uttrykt eller antydet for skade eller skade som kan oppstå fra feil installasjon eller bruk av dette produktet. Denne monteringen passer til: CZ 75 CZ 75 SP-01 CZ 75 SP-01 Phantom CZ 75 SP-01 Shadow CZ 85 CZ 97B CZ 97D CZ P-01 CZ P-07 (kan kreve tilpasning på grunn av variasjon i svalehalens dimensjoner) CZ P-09 (kan kreve tilpasning på grunn av variasjon i svalehalens dimensjoner) CZ PCR (det vil være en åpning under den fremre delen av adapterplaten) Tristar P120
Varsle ved tilgjengelighet
Ikke tilgjengelig.
Spesifikasjoner: Farge: Black Make: CZ Material: Aluminum Modell: 85, 75, P-07, P-09, 97B, P-01, SP-01 Shadow, PCR, SP-01, SP-01 Phantom, 97D Number of Bases: 1-Piece Style: Tactical

Attributes

Farge: Black Make: CZ Material: Aluminum Modell: P-09,P-07,SP-01 Phantom,SP-01 Shadow,97D,P-01,85,PCR,SP-01,75,97B Number of Bases: 1-Piece Style: Tactical Leveringsvekt: 0,045kg Frakthøyde: 25mm Fraktbredde: 76mm Fraktlengde: 140mm

Elementdetaljer

Made in USA



Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount fits: CZ 75 CZ 75 SP-01 CZ 75 SP-01 Phantom CZ 75 SP-01 Shadow CZ 85 CZ 97B CZ 97D CZ P-01 CZ P-07 (may require fitting due to a variance in dovetail dimensions) CZ P-09 (may require fitting due to a variance in dovetail dimensions) CZ PCR (there will be a gap under the front of the adapter plate) Tristar P120
Nyhetsbrev