Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

EGW
BROWNING AB3 SHORT ACTION PICATINNY SCOPE MOUNT

841370114030 296000623
This mount comes standard with a bevel on both sides making it ambidextrous. EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. Their one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. They machine these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). They recommend: 0 MOA - if shooting 0-500 yards 20 MOA - if shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, they recommend zeroing at 200 yards. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
849 849 1 NOK
Produktnr.: 296000623
EGW BROWNING AB3 SA 1-PIECE PICATINNY BASE 0 MOA
Produsentnr.: 43403 841370114030 Dette festet kommer standard med en skråkant på begge sider, noe som gjør det ambidekster. EGW anbefaler å måle hulavstanden i mottakeren din for å bekrefte at den stemmer overens med dimensjonene de har publisert. Picatinny tverrspor går over hele lengden av skinnen, noe som gir skytteren fleksibilitet når det gjelder montering av kikkertsikteringer og annet tilbehør. Kanalen i midten reduserer den totale massen av festet. I tillegg vil det i mange tilfeller ikke hindre bruk av fabrikkens jernsikter. Deres enhetlige siktefester er det opplagte valget for både jegere og taktiske skyttere. De maskinerer disse i sin butikk ved hjelp av en av deres bearbeidingssentre. Etter maskinering blir festene tørketromlet, sandblåst og Type II-anodisert for langvarig holdbarhet. Installasjon: EGW anbefaler 20 tommer lbs av dreiemoment og en dråpe blå loctite (loctite selges separat). De anbefaler: 0 MOA - hvis du skyter 0-500 yards 20 MOA - hvis du skyter 500-1000 yards Når du nullstiller riflen din med et 20 MOA feste, anbefaler de å nullstille på 200 yards. Hele festet og tilbehør (fra monteringsskruene og nøkkelen ned til emballasjen) er laget i USA.
849 NOK 1 kr 849,00 *
Leveringstid ca. 14-21 dager.
1 stk. på lageret i USA
Spesifikasjoner: Elevation: 0 MOA Farge: Black Make: Browning Material: Aluminum Modell: AB3 Number of Bases: 1-Piece Style: Picatinny Rail Type låskasse: Short

Attributes

Action Type: Short Elevation: 0 MOA Farge: Black Make: Browning Material: Aluminum Modell: AB3 Number of Bases: 1-Piece Style: Picatinny Rail Leveringsvekt: 0,091kg Frakthøyde: 25mm Fraktbredde: 102mm Fraktlengde: 229mm

Elementdetaljer

Made in USA



This mount comes standard with a bevel on both sides making it ambidextrous. EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. Their one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. They machine these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). They recommend: 0 MOA - if shooting 0-500 yards 20 MOA - if shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, they recommend zeroing at 200 yards. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
Nyhetsbrev