Tough, steel clamp captures the bolt head, and the large-handled turnscrew depresses the ejector so the ejector pin can be safely removed or installed. Set includes turnscrews to fit both Standard and Small bolt faces; also included are separate bolt head retainers. One will fit bolt bodies up to .720" diameter (standard and small bolt face) and the other will fit AR-15/M16 bolts only. Complete AR-15/M16 Bolt Ejector Tool also available separately. Tools work on bolts with plunger-style ejectors and forward-positioned locking lugs only.
SPECS: Steel, blued. Plastic handle. Includes instructions.
Mer...
Raskere fjerning av ejektorer med stemplestil
Tøff, stålklemme fanger bolthodet, og den storhåndterte svingskruen trykker ut ejektoren slik at ejektorstiften kan fjernes eller installeres trygt. Settet inkluderer dreieskruer som passer til både standard og små boltflater; også inkludert separate boltehodeholdere. Den ene vil passe boltelegemer opp til en diameter på 0,720 "(standard og liten boltplate), og den andre vil bare passe til AR-15 / M16-bolter. Komplett AR-15 / M16 boltutkastverktøy også tilgjengelig separat. Verktøy fungerer på bolter med stempel -stil ejektorer og fremover plasserte låseklapper.
Kundevurderinger for BROWNELLS BOLT EJECTOR TOOL SET
Antall vurderinger: 6
Fra brownells.com: 6
Gjennomsnittsvurdering: 2,3
not recommended(19.01.2010)
This tool is not recommended for ar bolts. It moves around too much when trying to drive roll pin out and does not secure the bolt .
Great Tool(09.04.2011)
Works exactly as advertised
Economical tool for the job(30.04.2012)
Read the instructions... My only gripe is one thing,"You have to clamp it real good while installing the roll pin.
Needs offset(20.04.2014)
Worked ok, but with AR bolt ejector, would be better if screw in device was offset to engage ejector and not in center.
fell apart(29.09.2014)
The cylinder section in the handle fell out. Seemed like it would work great but I can't tighten the driver part of the tool to depress the ejector.
A disappointment. Failed(01.03.2015)
After 38 years of trying to remove the AR ejector without assistance I finally broke down and purchased this tool. It did not hold up. The jaws bent. The handle separated. It was marginally helpful at best. I upgraded to the more expensive but much better Brownell's ejector tool that can be placed on the bench. The more expensive tool is far superior and makes ejector removal a snap.
Produktnr.: 080792100 BROWNELLS BOLT EJECTOR TOOL SET Tøff, stålklemme fanger bolthodet, og den storhåndterte svingskruen trykker ut ejektoren slik at ejektorstiften kan fjernes eller installeres trygt. Settet inkluderer dreieskruer som passer til både standard og små boltflater; også inkludert separate boltehodeholdere. Den ene vil passe boltelegemer opp til en diameter på 0,720 "(standard og liten boltplate), og den andre vil bare passe til AR-15 / M16-bolter. Komplett AR-15 / M16 boltutkastverktøy også tilgjengelig separat. Verktøy fungerer på bolter med stempel -stil ejektorer og fremover plasserte låseklapper.
Produktnr.: 080792002 BROWNELLS AR-15/M16 BOLT EJECTOR TOOL Tøff, stålklemme fanger bolthodet, og den storhåndterte svingskruen trykker ut ejektoren slik at ejektorstiften kan fjernes eller installeres trygt. Settet inkluderer dreieskruer som passer til både standard og små boltflater; også inkludert separate boltehodeholdere. Den ene vil passe boltelegemer opp til en diameter på 0,720 "(standard og liten boltplate), og den andre vil bare passe til AR-15 / M16-bolter. Komplett AR-15 / M16 boltutkastverktøy også tilgjengelig separat. Verktøy fungerer på bolter med stempel -stil ejektorer og fremover plasserte låseklapper.
Tough, steel clamp captures the bolt head, and the large-handled turnscrew depresses the ejector so the ejector pin can be safely removed or installed. Set includes turnscrews to fit both Standard and Small bolt faces; also included are separate bolt head retainers. One will fit bolt bodies up to .720" diameter (standard and small bolt face) and the other will fit AR-15/M16 bolts only. Complete AR-15/M16 Bolt Ejector Tool also available separately. Tools work on bolts with plunger-style ejectors and forward-positioned locking lugs only.
SPECS: Steel, blued. Plastic handle. Includes instructions.
Mer...
Raskere fjerning av ejektorer med stemplestil
Tøff, stålklemme fanger bolthodet, og den storhåndterte svingskruen trykker ut ejektoren slik at ejektorstiften kan fjernes eller installeres trygt. Settet inkluderer dreieskruer som passer til både standard og små boltflater; også inkludert separate boltehodeholdere. Den ene vil passe boltelegemer opp til en diameter på 0,720 "(standard og liten boltplate), og den andre vil bare passe til AR-15 / M16-bolter. Komplett AR-15 / M16 boltutkastverktøy også tilgjengelig separat. Verktøy fungerer på bolter med stempel -stil ejektorer og fremover plasserte låseklapper.
Kundevurderinger for BROWNELLS BOLT EJECTOR TOOL SET
Antall vurderinger: 6
Fra brownells.com: 6
Gjennomsnittsvurdering: 2,3
not recommended(19.01.2010)
This tool is not recommended for ar bolts. It moves around too much when trying to drive roll pin out and does not secure the bolt .
Great Tool(09.04.2011)
Works exactly as advertised
Economical tool for the job(30.04.2012)
Read the instructions... My only gripe is one thing,"You have to clamp it real good while installing the roll pin.
Needs offset(20.04.2014)
Worked ok, but with AR bolt ejector, would be better if screw in device was offset to engage ejector and not in center.
fell apart(29.09.2014)
The cylinder section in the handle fell out. Seemed like it would work great but I can't tighten the driver part of the tool to depress the ejector.
A disappointment. Failed(01.03.2015)
After 38 years of trying to remove the AR ejector without assistance I finally broke down and purchased this tool. It did not hold up. The jaws bent. The handle separated. It was marginally helpful at best. I upgraded to the more expensive but much better Brownell's ejector tool that can be placed on the bench. The more expensive tool is far superior and makes ejector removal a snap.