Din handlekurv er tom.

Handlekurv

37 17 00 00

Meld på nyhetsbrev

SILENCERCO
BERETTA 92FS/M9 THREADED BARREL

816413022580 100023757

Sets You Up To Shoot Your Beretta With a Sound Suppressor

The Silencerco Beretta 92F / 92FS / M9 Threaded Pistol Barrel turns your “Plain-Jane” Beretta into a suppressor ready host. The Silencerco Beretta 92F / 92FS / M9 Threaded Pistol Barrel does not require an XL piston. A normal ½"-28 tpi piston will provide reliable function. Threaded 1/2"-28 to accept a wide variety of pistol suppressors 1-10" twist rate Machined from 416R stainless steel Nonreflective black nitride finish Silencerco's Beretta 92F / 92FS / M9 Threaded Pistol Barrel comes ready drop-in into your pistol, and each ships with a thread protector to guard against damage to the threads when you're shooting unsuppressed.

Mer...

Gjør deg klar til å skyte din Beretta med en lyddemper

Silencerco Beretta 92F / 92FS / M9 Gjengede Pistolpiper forvandler din vanlige Beretta til en lyddemperklar vert. Silencerco Beretta 92F / 92FS / M9 Gjengede Pistolpiper krever ikke en XL-stempel. En normal ½"-28 tpi stempel vil sørge for pålitelig funksjon. Gjenget 1/2"-28 for å akseptere et bredt utvalg av pistol lyddempere 1-10" vridningsrate Maskinert fra 416R rustfritt stål Ikke-reflekterende sort nitrid finish Silencerco's Beretta 92F / 92FS / M9 Gjengede Pistolpiper leveres klar for å settes rett inn i pistolen din, og hver leveres med en gjengbeskytter for å vokte mot skade på gjengene når du skyter usupprimert.

Mer...

Kundevurderinger for SILENCERCO BERETTA 92FS/M9 THREADED BARREL

Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 3,9

Great barrel. (07.08.2017)

I picked up a used Beretta 92FS and this barrel went on sale the following day. Purchased the parts needed to complete the barrel assembly from Beretta. I took the gun to the range this past weekend and put 100 rounds through it with and without a supressor. Flawless. Great addition to the gun.

Bad experience, possible lemon (21.09.2017)

My well-used locking block would NOT fit into this Silencerco threaded barrel without modification - modification I wasn't willing to do. I initially thought the locking block was catching at the rear of the barrel, but it's also possible that the groove in the front was machined too narrowly, making the locking block unable to pivot all the way down. It would take a good amount of sanding for the locking block to slide freely like it does in my OEM Beretta barrel. IMO, this is unacceptable for a part that's A) supposedly "drop-in", and B) made for one of the most common supressor-hosts on the market. I should note this could have just been a lemon, or part of a bad batch (9/2017). Machining quality wasn't great, either, as there were machining lines around the chamber area, and the thread protector was not as well finished as my Silencerco Glock 34 barrel's, which I am COMPLETELY satisfied with. This 92 barrel, though, will be going back to Brownells as my first-ever return.

Silencerco Beretta 92FS Barrel Fitment (22.12.2017)

It's a shame I had to return this barrel. A factory new Beretta Locking Block would not fit properly. Had to almost force the block into position in the barrel then the block would not move/pivot as it should. This should be a drop in fit and I will not do any fitting to make it work.

Works with military surplus 92s model (17.02.2018)

I bought a beretta 92s model and wanted to shoot surpressed. I was pleasenly surprised that it dropped right in. I also bought a factory beretta upgraded locking block kit from brownells so I didnât have to reuse the original block from the old barrel.

The barrel fit and finished is just what I was hoping for and now I can use my liberty mystic x :)

Happy shooting!

Nice upgrade! (03.03.2018)

Silencerco has a winner with the Beretta 92 threaded barrel upgrade. I wanted to get my 92fs suppressor ready and they have it at a great price. Switching out the locking block from old to new was simple and easy. After the install, I gave it a test with 250 rounds and I found no differences at all with ..wellâ¦.. anything! It performed flawlessly and with same accuracy as I know my weapon.

This barrel is not chrome-lined like the Beretta original, however it is made of 416R steel with the same twist rate. After my test of 250, I cleaned and inspected the barrel and found no issues. I consider this a great choice for an upgrade and recommend if youâre ready to upgrade.

92s (21.05.2018)

Had to take a dremmel to it in order for the locking block to fit item needs a minor gunsmithing note added i by no means am one but just had to remove a few 1000âs of an inch. Fires very well no FTE or FTF on it yet. I had to send my HK barrel back because it FTE If itâs a range toy by all means go for it, for EDC I wouldnât trust anything but the original manufacturer barrels.

Works nice (11.10.2018)

This works pretty nice. I orderd a piston from silencerco to swap out on my osprey can so I can use it with this that I'm still waiting on, but I put around 250 rounds through it just with the barrel alone. It worked well while I was hitting a bunch of steel targets and using various ammo. I used the locking block from my stock barrel. There is a pin to knock out, then you just slide the little rear pin out and then the block can come out, I reused the pins on the new barrel as well. The extra little bit of barrel is also kind of cool I think. It will stick out of your holsters a little though. The one thing that I had after install was some stiffness with the slide. Just make sure you lube everything and rack it a good number of times to help break it in some before you shoot so that that break in process can go smoothly as well. I did have some hangups with some reloads but I think that fault was on my end and some 147gr winchester ammo a friend had me try, it did get stuck a couple times. I don't know if that was all just breakin kinks or what but my 124gr and 115gr ammo ran perfect. 124gr is my favored ammo for the full size 9mm.

Les 7 flere anmeldelser fra brownells.com

2949 2949 1 NOK

Produktnr.: 100023757
SILENCERCO BERETTA 92FS/M9 THREADED BARREL
Produsentnr.: AC2291 816413022580 Silencerco Beretta 92F / 92FS / M9 Gjengede Pistolpiper forvandler din vanlige Beretta til en lyddemperklar vert. Silencerco Beretta 92F / 92FS / M9 Gjengede Pistolpiper krever ikke en XL-stempel. En normal ½"-28 tpi stempel vil sørge for pålitelig funksjon. Gjenget 1/2"-28 for å akseptere et bredt utvalg av pistol lyddempere 1-10" vridningsrate Maskinert fra 416R rustfritt stål Ikke-reflekterende sort nitrid finish Silencerco's Beretta 92F / 92FS / M9 Gjengede Pistolpiper leveres klar for å settes rett inn i pistolen din, og hver leveres med en gjengbeskytter for å vokte mot skade på gjengene når du skyter usupprimert.

2949 NOK 0 kr 2 949,00 *

Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.

Spesifikasjoner: Barrel Length: 4.9'' Cartridge: 9 mm Luger Finish: Black Make: Beretta Modell: M9, 92F/FS Style: Threaded

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Vilkår for kjøp

Krav til kjøpetillatelse eller våpenkort og legitimasjon dersom kjøper har våpen i samme kaliber. (Original kjøpetillatelse må sendes pr post. Ordre blir ikke effektuert før kjøpetillatelse eller annen dokumentasjon foreligger))

Attributes

Barrel Length: 4.9'' Cartridge: 9 mm Luger Finish: Black Make: Beretta Modell: M9,92F/FS Style: Threaded Leveringsvekt: 0,159kg Frakthøyde: 48mm Fraktbredde: 46mm Fraktlengde: 203mm

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.c

Sets You Up To Shoot Your Beretta With a Sound Suppressor

Mer...

Gjør deg klar til å skyte din Beretta med en lyddemper

Mer...

Kundevurderinger for SILENCERCO BERETTA 92FS/M9 THREADED BARREL

Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 3,9

Great barrel. (07.08.2017)

Bad experience, possible lemon (21.09.2017)

Silencerco Beretta 92FS Barrel Fitment (22.12.2017)

Works with military surplus 92s model (17.02.2018)

Nice upgrade! (03.03.2018)

92s (21.05.2018)

Works nice (11.10.2018)

Les 7 flere anmeldelser fra brownells.com

Kunder kjøpte også

A-TEC PMM-6 LYDDEMPER KALIBER ≤ 9 mm, 1/2"-28 UNEF - Impuls bakstykke, hard fjÃ¦r
A-TEC PMM-6 LYDDEMPER

A-TEC

Kommer til lager

kr 5 564,00 * kr 5 200,00 - kr 5 564,00*

Dempere

HOGUE RUGER 10/22 TAKEDOWN STOCK THUMBHOLE RUBBER BLK
RUGER 10/22 TAKEDOWN STOCK THUMBHOLE

HOGUE

På lager

kr 1 999,00 *

Riflestokker

BROWNELLS AR-15 MODULAR GAS BLOCK 0.750"
AR-15 GAS BLOCK KIT MODULAR

BROWNELLS

På lager

kr 549,00 * kr 289,00 - kr 1 149,00*

Gas Blocks

3,2

BERETTA USA SCREW, GRIP, 92/96F, ALLEN, BLACK
SCREW, GRIP, 92/96F, ALLEN, BLACK

BERETTA USA

Kommer til lager

kr 129,00 *

Grepsskruer

BERETTA USA SCREW, GRIP, 92/96 STOCK & COMBAT
SCREW, GRIP, 92/96 STOCK & COMBAT

BERETTA USA

På lager

kr 219,00 *

Grepsskruer

Logg inn

Glemt passord?
Registrere

CONNECT

NETTSTEDSKART

PRODUKTKATEGORIER

BESTILLING

KUNDE SERVICE

Velkommen!

Velkommen til Brownells.no, Norges ledende leverandør av våpenrelaterte produkter, våpendeler, børsemakerverktøy, ladeverktøy, ladeutstyr og ladekomponenter!

Vårt kundeløfte:

Uansett om du bare liker å skyte, har våpen som hobby, er børsemaker og reparerer våpen daglig eller bare eier et våpen er dette siden for deg! I over 75 år har skyttere, profesjonelle børsemakere, hobby utøvere, militæret, politiet og våpenreparatører kommet til Brownells for å finne produkter og deler av høy kvalitet. Hos oss finner du over 40 000 produkter inkludert unike våpendeler, tilbehør, børsemakerverktøy, ladeverktøy, ladeutstyr, komponenter, ammunisjon og andre produkter for å vedlikeholde, reparere eller oppgradere dine våpen.

Priser inkl. mva. pluss levering

Klassisk visning

Mobilvisning