Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

fraktprisen_topp_970_50

TANGODOWN ARMORER'S BLOCKS


Auto-oversatt beskrivelse (Beskrivelse - Produsent): ARR lavere mottaker/utløse modul Mer...

305900350003 100003428
Protects Critical Components From Damage When Clamping For Maintenance
High-density polymer blocks allow critical subassemblies of the SOF Command Assault Rifle (SCAR) to be tightly clamped in a vise without danger of crushing, twisting, or otherwise distorting them. Provides secure support for safe, effective cleaning, adjustment, maintenance, and repair without marring or scratching the finish. Available as a complete set or separate components. Upper Receiver/Barrel Block surrounds the front sight/gas block to securely hold the barrel module while also protecting the exposed portion of the gas system leaving your upper free to be worked on. Lower Receiver/Trigger Module Block locks into the magazine well and absorbs all the clamping force to protect the SCAR’s polymer lower receiver from damage. One end fits the 5.56x45mm SCAR-L; flip the block around and other end fits the 7.62x51mm SCAR-H. Bolt Maintenance Block gives proper support to disassemble the bolt for cleaning or repair. The SCAR Armorer’s Block Set (100-003-431) contains the SCAR Lower block (100-003-428) and SCAR Upper blocks (100-003-470) ALONG with the block for bolt disassembly/assembly for bolt cleaning and maintenance. This set is the official SOCOM-issue Armorer’s Block Set for the FNH SCAR MK16 & MK17. All major service procedures for this weapon system can be accomplished easily using the 5 piece set. Allows barrel service, trigger module repair, and bolt disassembly/reassembly for both calibers. Mounts MK13 grenade launcher for inspection and service as well. High grade injection molded nylon prevents marking or marring of weapon. For professional armorer or gunsmith use only.

SPECS: High-density, injection-molded polymer.

TANGODOWN
871 1197 3 NOK
100003428
SCAR Lower Receiver/Trigger Module Vise
Produsentnr.: TMB001 305900350003 ARR lavere mottaker/utløse modul skruestikken
871 NOK 5 kr 871,00 *

5 på lager
Spesifikasjoner: Make: FN Model: SCAR

Beskrivelse

ARR lavere mottaker/utløse modul skruestikken

Attributes

Make: FN Model: SCAR

Elementdetaljer

Made in USA





100003470
SCAR Upper Receiver/Barrel Vise Block ARR øvre mottaker/fat Vise blokk
1197 NOK 6 kr 1 197,00 *

6 på lager
Spesifikasjoner: Make: FN Model: SCAR

Beskrivelse

ARR øvre mottaker/fat Vise blokk

Attributes

Make: FN Model: SCAR

Elementdetaljer

Made in USA


100003431
SCAR Armorer's Block Set
Produsentnr.: ABSFNSCAR001 Høy tetthet polymer blokker kan kritiske undersammenstillinger av SOF kommandoen Assault Rifle (SCAR) å være tett festet i en skruestikke uten fare for knusing, kronglete eller ellers fordreie dem.. Støtter sikker sikker, effektiv rengjøring, justering, vedlikehold og reparasjon uten marring eller riper i slutten. Tilgjengelig som et komplett sett eller separate komponenter. Øvre mottaker/fat Block omgir front syn/gass blokk for å sikkert holde modulen fat samtidig beskytte den utsatte delen av gassen forlater øvre gratis arbeidet på. Lavere mottaker/utløse modul blokk låser i magasinet brønnen og absorberer alle lukkekraft å beskytte ARRETS polymer lavere mottaker fra skade. Ene enden passer 5.56x45mm SCAR-L; Flip blokken rundt og andre enden passer 7.62x51mm SCAR-H. Bolt vedlikehold blokk gir riktig støtte å demontere bolten for rengjøring eller reparasjon. ARR Armorer blokk sett (100-003-431) inneholder arr lavere blokk (100-003-428) og SCAR øvre blokker (100-003-470) sammen med blokken for bolt demontering/montering for bolt rengjøring og vedlikehold. Dette er den offisielle SOCOM-problem Armorer blokk satt for FNH arr MK16 & MK17. Alle store service prosedyrer for dette våpensystemet kan gjøres enkelt med 5 piece sett. Lar fat service, utløser modul reparasjon og bolt demontering/gjenoppbygging for begge kalibre. Montere MK13 granatkaster for inspeksjon og tjenesten også. Høy klasse sprøytestøpt nylon forhindrer merking eller marring våpen. For profesjonell armorer og børsemaker bare.

Dette produktet kan dessverre ikke bestilles.
Spesifikasjoner: Make: FN Model: SCAR

Attributes

Make: FN Model: SCAR

Elementdetaljer

Made in USA


Protects Critical Components From Damage When Clamping For Maintenance
High-density polymer blocks allow critical subassemblies of the SOF Command Assault Rifle (SCAR) to be tightly clamped in a vise without danger of crushing, twisting, or otherwise distorting them. Provides secure support for safe, effective cleaning, adjustment, maintenance, and repair without marring or scratching the finish. Available as a complete set or separate components. Upper Receiver/Barrel Block surrounds the front sight/gas block to securely hold the barrel module while also protecting the exposed portion of the gas system leaving your upper free to be worked on. Lower Receiver/Trigger Module Block locks into the magazine well and absorbs all the clamping force to protect the SCAR’s polymer lower receiver from damage. One end fits the 5.56x45mm SCAR-L; flip the block around and other end fits the 7.62x51mm SCAR-H. Bolt Maintenance Block gives proper support to disassemble the bolt for cleaning or repair. The SCAR Armorer’s Block Set (100-003-431) contains the SCAR Lower block (100-003-428) and SCAR Upper blocks (100-003-470) ALONG with the block for bolt disassembly/assembly for bolt cleaning and maintenance. This set is the official SOCOM-issue Armorer’s Block Set for the FNH SCAR MK16 & MK17. All major service procedures for this weapon system can be accomplished easily using the 5 piece set. Allows barrel service, trigger module repair, and bolt disassembly/reassembly for both calibers. Mounts MK13 grenade launcher for inspection and service as well. High grade injection molded nylon prevents marking or marring of weapon. For professional armorer or gunsmith use only.

SPECS: High-density, injection-molded polymer.