Din handlekurv er tom.

Handlekurv

37 17 00 00

Meld på nyhetsbrev

BROWNELLS
AR-15/M16 SIGHT WRENCHES

873781000596 078015002

Models For A1 & A2 Make Sight Adjusting Quick & Easy

Even tho' you're supposed to be able to adjust these sights with nothing more than a round of ammo, folks who've tried know it's just not that simple. This decidedly handy little Sight Wrench does the job, quick and easy.

SPECS: 1-3/8" (3.5cm) long x ¾" (19.0mm) dia. Blued steel. Models for A1, five-prong (adjusts front and rear) and A2, four-prong.

Mer...

Modeller for A1 & A2 Gjør det enkelt å justere synet

Selv for at du skal kunne justere severdighetene med noe mer enn en ammunisjonsrunde, folk som har prøvd vet at det bare ikke er så enkelt. Denne desidert hendige lille siktnøkkelen gjør jobben, raskt og enkelt.

SPECS: 1-3 / 8 "(3,5 cm) lang x" (19,0 mm) dia. Blåstål. Modeller for A1, fem-tapp (justerer foran og bak) og A2, fir-tapp.

Mer...

Kundevurderinger for BROWNELLS A2/M16 SIGHT WRENCH

Antall vurderinger: 21
Fra brownells.com: 21
Gjennomsnittsvurdering: 2,9

Nice product! (02.10.2009)

Hard to find quality US made tools for sight adjustment anymore. This is a robust tool, and compact enough for take along.

ok tool but great customer service (20.10.2009)

so the first time i used it one of the teeth broke off and the rest got bent up real bad. i emailed Brownells and they let me exchange it for a new one. [...] im not sure if my sights are a little tight or the tool is a little weak. my new one works great, i just have to be gentle with it.

A2 sight wrench (05.01.2010)

Just used this wrench to set the sights on my Magpul BIUS. Worked great. The teeth seems a little thin, but still a value at this price.

Limited Use (27.04.2010)

I'm sure it is perfect for most A2 sights. It absolutely will not adjust Troy HK style BUIS. The shaft is too short to reach the base. I wish there had been a review addressing this before I bought it, but I'm not going to say that it is a bad product. I will keep it for other sights.

Too Short! (15.10.2010)

I'm sure this works fine on most AR sights, but not my new A.R.M.S. 71F front sight. The narrow barrel is too short to reach the detent because the knurled body hits the sight blades and stops right there. It just needs to be a bit longer, or the bevel at the shoulder needs to be narrower to make it a useful tool for some of the newer sight styles currently on the market.

Yes!finally a front site tool that works (07.02.2011)

Using another tool I could not lower my front post site any more..with this... 3 whole revolutions more! Time to go see if now my rifle isn't shooting low! I doubt it will last for long as the teeth are small..but it worked this time, hopefully it will have a long life.

Works good (17.11.2011)

Works good, adjusts the sight, and it will fit inside Brownell's AR-15 buttstock pouch cleaning kit, which is handy if you have that kit and an A2 buttstock.

Not strong enough (27.03.2012)

This tool is very convenient for adjusting that pain in the rear front site post, however, the prongs keep breaking. I have gone threw two of these so far. Some broke off while adjusting, the others in the padded compartment in my range bag.

No go on pre-ban Bushmasters (04.08.2012)

May work for most people but on three different pre-ban A2 Bushmasters it just did fit. The tool's front sight cylinder had the proper number of pins but was too small in diameter for the pins to fit into the notches on the front sight post.

Worked Perfect (13.08.2012)

Recently purchased a new rifle with A2 front sights and I could not get them to budge the way I was taught in the Army. My frustration at not being able to get my rifle zeroed with under 18 rounds was angering me! I even tried holding the detent down with a small nail and trying to turn the post with my leatherman and no movement. So I purchased this tool and within five minutes of it being opened from the plastic bag and nine rounds later...3 holes in the ring of the 25m target with iron sights and only resting on my ammo can in the prone position. The folks that are breaking these things must be holding their mouth wrong or something. It works great!

Works but it is a precise fit (12.09.2012)

The first time I tried to use the A2 tool I was at the range with three pre-ban A2 style Bushmasters and couldn't get it to fit the front post. I got frustrated, gave up and used a punch. HOWEVER, on a return trip with the same Bushmasters a little more patience proved the tool does fit properly. In fact it worked just fine, it's just a more precise fit than I was expecting the first go round. I expected a sloppy fit but it is a precision fit. Works better than a punch or unfired round. It left no marks, scars or mars. Feel much better about the purchase now. Four stars simply because I think this may be a case where a little slop is needed otherwise it's a five.

save your money (12.09.2012)

It does not depress the detent at all. If you depress the detent with something else, you can than adjust the sight with this tool, but needing an aditional tool kind of defeats the purpose

A well made, useful and useable tool (27.02.2014)

Because of the low ratings, I almost did not buy this tool but I am glad I took a chance. The tool is well made, machined from a solid chunk of steel. It fit perfectly in my front site, although because of some comments I knew the fit would be snug and allowed myself a few seconds to find the proper alignment. I removed the site and replaced it literally within seconds, unlike when using a separate tool to depress the detent. It also allows sufficient "feel" to make adjustments one click at a time, and so makes adjusting the front site at the range easier.

Fits my DDM4v1 stock sights perfectly (20.12.2014)

The sight wrench fits the stock iron sights on my DDM4v1 very well and allows me to adjust the sights without having to use two hands! The rifle is brand new and the sights were not movable with the tried and true bullet method so this tool was the perfect item for the job.

works like a charm (18.01.2015)

Given the reviews I'd read, I was unsure this thing would work. Like others I couldn't get a bullet to hold down the release button and turn the post on my Rock River A2, but on my first attempt, this wrench worked like a charm.

poor quality (24.08.2011)

one prong on the front sight was bent before it was even out of the package. When I attempted to straighten, it broke off.

You want the other AR15 Sight Wrench (03.12.2011)

The diameter of the 4 pronge end of the wrench was too wide to fit in my Bushmaster A2 upper.

Might work with a little grinding (16.02.2012)

The elevation end works the front sight OK. The windage end does not have enough prong length to retract the index pin. gonna have to get the Dremel out...

Avoid this tool (04.05.2012)

I don't know how this got into Brownell's catalog. It is so flimsy. The second time I went to adjust my front sight, one of the little nubs broke off in the assembly. You can get a better result by depressing the detente pin with an 8penny nail and turning the post with the eraser end of a common pencil.

ar15 sight tool (31.05.2012)

the four nubs on the tool are to short to adjust my yankee hill front sights..would not work on anybodys else at the range either..a very poor product

a-1 a-2 sight wrench (08.01.2016)

bought this a-2 wrench to adjust front sights. barrel part of wrench

will not even get close enough to turn the sight. can not even push the detent down with it. it works in there video, but what they sent me was a waste of my money. don't waste yours

Les 21 flere anmeldelser fra brownells.com

299 379 2 NOK

Produktnr.: 078015002
BROWNELLS A2/M16 SIGHT WRENCH
Produsentnr.: 1519A2 873781000596 Selv for at du skal kunne justere severdighetene med noe mer enn en ammunisjonsrunde, folk som har prøvd vet at det bare ikke er så enkelt. Denne desidert hendige lille siktnøkkelen gjør jobben, raskt og enkelt.

379 NOK 0 kr 379,00 *

Varsle ved tilgjengelighet

Kan ikke restnoteres for øyeblikket

Spesifikasjoner: Make: AR-15

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Attributes

Make: AR-15 Leveringsvekt: 0,086kg Bredde: 83mm Lengde: 146mm

Elementdetaljer

Made in USA

Produktnr.: 078015001
BROWNELLS A1 SIGHT WRENCH Selv for at du skal kunne justere severdighetene med noe mer enn en ammunisjonsrunde, folk som har prøvd vet at det bare ikke er så enkelt. Denne desidert hendige lille siktnøkkelen gjør jobben, raskt og enkelt.

299 NOK 42 kr 299,00 *

10+ på lager

Spesifikasjoner: Make: AR-15

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Attributes

Make: AR-15 Leveringsvekt: 0,045kg Høyde: 10mm Bredde: 69mm Lengde: 86mm

Elementdetaljer

Made in USA

Models For A1 & A2 Make Sight Adjusting Quick & Easy

SPECS: 1-3/8" (3.5cm) long x ¾" (19.0mm) dia. Blued steel. Models for A1, five-prong (adjusts front and rear) and A2, four-prong.

Mer...

Modeller for A1 & A2 Gjør det enkelt å justere synet

SPECS: 1-3 / 8 "(3,5 cm) lang x" (19,0 mm) dia. Blåstål. Modeller for A1, fem-tapp (justerer foran og bak) og A2, fir-tapp.

Mer...

Kundevurderinger for BROWNELLS A2/M16 SIGHT WRENCH

Antall vurderinger: 21
Fra brownells.com: 21
Gjennomsnittsvurdering: 2,9

Nice product! (02.10.2009)

Hard to find quality US made tools for sight adjustment anymore. This is a robust tool, and compact enough for take along.

ok tool but great customer service (20.10.2009)

A2 sight wrench (05.01.2010)

Just used this wrench to set the sights on my Magpul BIUS. Worked great. The teeth seems a little thin, but still a value at this price.

Limited Use (27.04.2010)

Too Short! (15.10.2010)

Yes!finally a front site tool that works (07.02.2011)

Works good (17.11.2011)

Works good, adjusts the sight, and it will fit inside Brownell's AR-15 buttstock pouch cleaning kit, which is handy if you have that kit and an A2 buttstock.

Not strong enough (27.03.2012)

No go on pre-ban Bushmasters (04.08.2012)

Worked Perfect (13.08.2012)

Works but it is a precise fit (12.09.2012)

save your money (12.09.2012)

It does not depress the detent at all. If you depress the detent with something else, you can than adjust the sight with this tool, but needing an aditional tool kind of defeats the purpose

A well made, useful and useable tool (27.02.2014)

Fits my DDM4v1 stock sights perfectly (20.12.2014)

works like a charm (18.01.2015)

poor quality (24.08.2011)

one prong on the front sight was bent before it was even out of the package. When I attempted to straighten, it broke off.

You want the other AR15 Sight Wrench (03.12.2011)

The diameter of the 4 pronge end of the wrench was too wide to fit in my Bushmaster A2 upper.

Might work with a little grinding (16.02.2012)

The elevation end works the front sight OK. The windage end does not have enough prong length to retract the index pin. gonna have to get the Dremel out...

Avoid this tool (04.05.2012)

ar15 sight tool (31.05.2012)

the four nubs on the tool are to short to adjust my yankee hill front sights..would not work on anybodys else at the range either..a very poor product

a-1 a-2 sight wrench (08.01.2016)

Les 21 flere anmeldelser fra brownells.com

BROWNELLS AR-15 FRONT SIGHT BENCH BLOCK
AR-15 FRONT SIGHT BENCH BLOCK

BROWNELLS

5 på lager 5 på lager

kr 999,00 *

Sikte verktøy

3,4 (32)

BROWNELLS AR-15/M16 LOWER RECEIVER VISE BLOCK
AR-15/M16 LOWER RECEIVER VISE BLOCK

BROWNELLS

På lager 6 på lager

kr 429,00 * kr 429,00 - kr 899,00*

Bench & Vise Blocks

3,6 (49)

BROWNELLS AR-15/M16 BARREL EXTENSION TORQUE TOOL
AR-15/M16 BARREL EXTENSION TORQUE TOOLS

BROWNELLS

10+ på lager 10+ på lager

kr 799,00 *

Løpsverktøy

4,5 (26)

KNS PRECISION, INC. MULTI POST FRONT SIGHT PACK STEEL BLACK
AR-15 POST FRONT SIGHT PACK

KNS PRECISION, INC.

Kan ikke restnoteres for øyeblikket Kan ikke restnoteres for øyeblikket

kr 599,00 *

Frontsikter

4 (2)

COLT A4 OVAL HEAD TUBULAR RIVET BLACK STEEL
A4 OVAL HEAD TUBULAR RIVET BLACK STEEL

COLT

10+ på lager 10+ på lager

kr 129,00 *

Reimbøyleskruer etc

0 (0)

GRACE USA 1/16" (1.6MM) BRASS PIN PUNCH
BRASS PUNCH SET

GRACE USA

På lager 9 på lager

kr 199,00 * kr 199,00 - kr 799,00*

Puncher

4 (5)

BROWNELLS AR-15 A2 CHARGING HANDLE LATCH SPRING
AR-15 CHARGING HANDLE LATCH SPRING

BROWNELLS

På lager 5 på lager

kr 99,00 * kr 99,00 - kr 129,00*

Fjærer

0 (0)

BROWNELLS A2 AR-15 SIGHT WRENCH
AR-15 SIGHT WRENCH

BROWNELLS

På lager 9 på lager

kr 299,00 * kr 299,00 - kr 359,00*

Skiftenøkler

3 (11)

Logg inn

Glemt passord?
Registrere

CONNECT

NETTSTEDSKART

PRODUKTKATEGORIER

BESTILLING

KUNDE SERVICE

Velkommen!

Velkommen til Brownells.no, Norges ledende leverandør av våpenrelaterte produkter, våpendeler, børsemakerverktøy, ladeverktøy, ladeutstyr og ladekomponenter!

Vårt kundeløfte:

Uansett om du bare liker å skyte, har våpen som hobby, er børsemaker og reparerer våpen daglig eller bare eier et våpen er dette siden for deg! I over 75 år har skyttere, profesjonelle børsemakere, hobby utøvere, militæret, politiet og våpenreparatører kommet til Brownells for å finne produkter og deler av høy kvalitet. Hos oss finner du over 40 000 produkter inkludert unike våpendeler, tilbehør, børsemakerverktøy, ladeverktøy, ladeutstyr, komponenter, ammunisjon og andre produkter for å vedlikeholde, reparere eller oppgradere dine våpen.