Din handlekurv er tom.

Handlekurv

37 17 00 00

HAHN PRECISION AR-15/M16 9MM DEDICATED CONVERSION BLOCK

Dedicated 9mm Conversion Block

Auto-oversatt beskrivelse (Beskrivelse - Produsent): Designet, produsert og felt-testet spesielt for lovhåndteringspersonell som trenger en AR-15 / M16 dedikert til 9mm ammunisjon ved bruk av Colt og modifiserte Uzi-magasiner. Integrerte benkroker over toppen av den nedre mottakeren for å forhindre utilsiktet fall ut under faktiske kampsituasjoner der påliteligheten er av største viktighet. Mer...

Produktnr.: 100002321 100002321

Hahn Design Gives Reliable Function

Designed, manufactured, and field-tested specifically for law enforcement personnel who require an AR-15/M16 dedicated to 9mm ammo using Colt and modified Uzi-type magazines. Integral leg hooks over the top of the lower receiver to prevent accidental fall-out during actual combat situations where reliability is paramount. Two-piece, aluminum body features extra tight, mating surfaces to minimize the collection of carbon and brass buildup; scalloped hold-actuator allows unburned powder and other debris to pass through for uninterrupted cycling. Hold actuator is wire EDM-machined from high grade, 01 tool steel and functions with the standard 5.56mm bolt hold-open, which is strong, reliable and more readily available than the 9mm version. (Last round hold-open feature functions with Colt magazines only.) Ejector is of standard, Colt configuration for easy replacement by any department armorer. Funneled magazine well ensures smooth entry for rapid mag changes and limits rotational movement caused by variances in magazine taper. Spring-loaded roller maintains constant tension against the lower receiver well to prevent free play. Steel, feed ramp is heat-treated for extra strength and superior wear-resistance; provides consistent round delivery with most bullet types. Armorer installation recommended.

SPECS: Body 6061-T6 billet aluminum, Mil-Spec black anodized finish. Components Steel, parkerized finish. Fits all Mil-Spec AR-15/M16 receivers. Armorer installation recommended.

Mer...

Hahn Design gir pålitelig funksjon

Designet, produsert og felt-testet spesielt for lovhåndteringspersonell som trenger en AR-15 / M16 dedikert til 9mm ammunisjon ved bruk av Colt og modifiserte Uzi-magasiner. Integrerte benkroker over toppen av den nedre mottakeren for å forhindre utilsiktet fall ut under faktiske kampsituasjoner der påliteligheten er av største viktighet. To-delt aluminiumsdel har ekstra tette, sammenflate overflater for å minimere samlingen av karbon- og messingoppbygging; scalloped hold-aktuator lar uforbrutt pulver og annet rusk passere for uavbrutt sykling. Holdaktuator er tråd EDM-maskinert fra 01-høykvalitets verktøystål og fungerer med standard 5,56 mm bolt holder-åpen, som er sterk, pålitelig og mer tilgjengelig enn 9mm-versjonen. (Siste runde hold-open-funksjonen fungerer bare med Colt-magasiner.) Ejektor er av standard Colt-konfigurasjon for enkel utskifting av en hvilken som helst avdelingsrustning. Funneled magazine-brønn sikrer jevn inngang for raske mag-endringer og begrenser rotasjonsbevegelse forårsaket av avvik i magasinet. Fjærbelastet rulle opprettholder konstant spenning mot den nedre mottakeren godt for å forhindre fritt spillerom. Stål, materampe varmebehandles for ekstra styrke og overlegen slitestyrke; gir jevn rund levering med de fleste kuletyper. Armorer installasjon anbefales.

SPECS: Body 6061-T6 billet aluminium, Mil-Spec svart anodisert overflate. Komponenter Stål, parkert finish. Passer til alle Mil-Spec AR-15 / M16 mottakere. Armorer installasjon anbefales.

Mer...

Kundevurderinger for Dedicated 9mm Conversion Block

Antall vurderinger: 9
Fra brownells.com: 9
Gjennomsnittsvurdering: 4,9

Awesome product! (16.11.2009)

Just got my Hahn Dedicated 9mm conversion block. It is worth every penny. It doesnt get any better. This thing is awesome. Perfect fit in my lower. Made extremely well. I have had other conversion blocks and this one is by far the best. Bolt hold open works perectly. I am very impressed. Thank you Brownells.

Excellent Product (21.04.2010)

We used this block with the RRA upper assem. and it feeds,ejects and locks the bolt open every time with both metalform and c products mags. After more than a 1000 rounds that is something for a 9mm AR.

For the Serious 9mm AR-15 Shooter (04.06.2011)

Had not been impressed with performance of bottom loading and plastic blocks used by some of my shooting friends and was somewhat leary of them. This dedicated top loading conversion block is a semi permanent installation in your lower and not a quick change. The block can be removed but not as quickly as the bottom loaded units. Required very minor filing of the inside of my lower's mag well and removal and re-installation of the bolt catch. But, this is what makes this block as reliable as a dedicated 9mm lower receiver and it cannot fall out of the receiver! Functions flawlessly with the Metalform 20 round magazines and holds the bolt open after every last shot. Buy this one first and save money, you won't be disappointed. I am one happy 9mm Carbine shooter.

Worth it (27.08.2012)

Bought for a 9mm build on a generic CMC produced 5.56 lower, using a CMMG dedicated upper and CMMG buffer and Metalform Mags. Skeptical at purchase--but fit exceptionally well, and flawless in operation/function. The installation is benign--all you have to do is partially remove the bolt catch pin; temporarily remove the bolt catch long enough to slide the Hahn insert into the mag well from the top--then reverse the process. I think I spent 3 minutes on the whole deal. Bottom line: the quality and craftsmanship is recognized best when viewing and inspecting the device after installation. Precisely machined and finished. (Hence the brand name) And, Mag well has great machined tapers for mag fit. If you did not CLOSELY inspect, you might think this was a dedicated 9mm lower.
I like mine--zero malfunctions and over 600 rds.

Very happy purchase (11.02.2015)

Decided to build a 9mm AR, but initially balked at the cost of this unit and installed the ProMag unit instead. The Promag unit would not reliably load any type of ammunition I tried. Brownells accepted it back and I exchanged for this unit. I wish I would have started with it! The machining is perfect and it reliably loaded both 124 Grain and 147 Grain FMJ with no problems. Admittedly, have only fired 100 rounds through it using Brownells 32 rnd magazines, but had no failures. If you do not want to go with a dedicated receiver, this unit is worth the cost. There really is no comparison. I tried inexpensive and it was cheap for a reason.

May require adjustment (09.03.2015)

Well made part. However, I had extracting issues which was easily fixed by just slightly bending the ejector closer to the bolt to ensure it was contacting the case head every time, firearm functions flawless ever since. FYI, I tried pro mags which were junk (figures), but the metal form mags they sell here are great!

Hahn conversion block is the best! (29.09.2015)

I installed this in a Spikes lower for a 9mm build. Easy to install. Worked perfect from the first round. Feed everything I stuff in the mags. 147 FMJ-TC, HP's, Even the Bayou 147 FP!

Very much worth the price difference!

Great Product! (17.10.2016)

This is the ultimate 9mm conversion block. Simple installation and flawless performance at the range! Three 32 round mags without a hiccup. Worth the extra bucks!!

Worked perfectly (14.11.2016)

This conversion block worked perfectly. This was my first 9mm AR that I built. Was a little worried about not getting a dedicated lower/upper kit so I did not want to skimp on a cheaper conversion block.

The quality of the block is very high. Feels tough and fit perfectly into the AR lower with no wiggle room. I did have to install it prior to installing the mag release button but that's not any different than any other build I've done.

The Brownell's Colt style magazines fit perfectly again very precise and no wiggle or sloppiness at all. The bolt held back every time the mag was empty. I put around 200 rounds through the combo with zero defects at all. No misfeeds, misfire, or anything. I am very pleased with this item and I know that it'll perform well for anyone.

Les 9 flere anmeldelser fra brownells.com

3752 3752 1 NOK

100002321
Dedicated 9mm Conversion Block
Produsentnr.: A9CSRD0405 Designet, produsert og felt-testet spesielt for lovhåndteringspersonell som trenger en AR-15 / M16 dedikert til 9mm ammunisjon ved bruk av Colt og modifiserte Uzi-magasiner. Integrerte benkroker over toppen av den nedre mottakeren for å forhindre utilsiktet fall ut under faktiske kampsituasjoner der påliteligheten er av største viktighet. To-delt aluminiumsdel har ekstra tette, sammenflate overflater for å minimere samlingen av karbon- og messingoppbygging; scalloped hold-aktuator lar uforbrutt pulver og annet rusk passere for uavbrutt sykling. Holdaktuator er tråd EDM-maskinert fra 01-høykvalitets verktøystål og fungerer med standard 5,56 mm bolt holder-åpen, som er sterk, pålitelig og mer tilgjengelig enn 9mm-versjonen. (Siste runde hold-open-funksjonen fungerer bare med Colt-magasiner.) Ejektor er av standard Colt-konfigurasjon for enkel utskifting av en hvilken som helst avdelingsrustning. Funneled magazine-brønn sikrer jevn inngang for raske mag-endringer og begrenser rotasjonsbevegelse forårsaket av avvik i magasinet. Fjærbelastet rulle opprettholder konstant spenning mot den nedre mottakeren godt for å forhindre fritt spillerom. Stål, materampe varmebehandles for ekstra styrke og overlegen slitestyrke; gir jevn rund levering med de fleste kuletyper. Armorer installasjon anbefales.

3752 NOK 4 kr 3 752,00 *

4 på lager

Spesifikasjoner: Make: AR-15

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Attributes

Make: AR-15

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.x

Hahn Design Gives Reliable Function

SPECS: Body 6061-T6 billet aluminum, Mil-Spec black anodized finish. Components Steel, parkerized finish. Fits all Mil-Spec AR-15/M16 receivers. Armorer installation recommended.

Mer...

Hahn Design gir pålitelig funksjon

SPECS: Body 6061-T6 billet aluminium, Mil-Spec svart anodisert overflate. Komponenter Stål, parkert finish. Passer til alle Mil-Spec AR-15 / M16 mottakere. Armorer installasjon anbefales.

Mer...

Kundevurderinger for Dedicated 9mm Conversion Block

Antall vurderinger: 9
Fra brownells.com: 9
Gjennomsnittsvurdering: 4,9

Awesome product! (16.11.2009)

Excellent Product (21.04.2010)

For the Serious 9mm AR-15 Shooter (04.06.2011)

Worth it (27.08.2012)

Very happy purchase (11.02.2015)

May require adjustment (09.03.2015)

Hahn conversion block is the best! (29.09.2015)

Great Product! (17.10.2016)

This is the ultimate 9mm conversion block. Simple installation and flawless performance at the range! Three 32 round mags without a hiccup. Worth the extra bucks!!

Worked perfectly (14.11.2016)

Les 9 flere anmeldelser fra brownells.com

Kunder kjøpte også
Alternativer

Triggerguard Pin
GAS TUBE PIN

TTI INTL

Utsolgt Dette produktet kan dessverre ikke restnoteres.

kr 83,00 * kr 66,00 - kr 83,00*

Avrekksbøyle pinner | Utskyterpinner

5 (2)

Enhanced Self-Leveling Follower 3-Pak, Yellow
AR-15/M16 USGI ENHANCED SELF-LEVELING FOLLOWER

MAGPUL

Dette produktet kan dessverre ikke restnoteres. Dette produktet kan dessverre ikke restnoteres.

kr 142,00 *

Magasin tilbringere

4,5 (4)

Bolt Catch Punch
BOLT CATCH PIN PUNCH

BROWNELLS

10+ på lager 10+ på lager

kr 235,00 *

Demonteringsverktøy

4,8 (23)

.223 Rem Case Length/Headspace Gauge
RIFLE CASE LENGTH/HEADSPACE GAUGES

LYMAN

Kan restnoteres Kan restnoteres

kr 417,00 * kr 369,00 - kr 423,00*

Hylse måleverktøy

5 (3)

9mm GEN2 Silent Capture Spring Short Stroke All Steel Mass
9MM GEN 2 SILENT CAPTURED SPRING SYSTEM SHORT STROKE VERSION

J P ENTERPRISES

På lager 9 på lager

kr 2 979,00 * kr 2 979,00 - kr 2 998,00*

0 (0)

Logg inn

Glemt passord?
Registrere

CONNECT

NETTSTEDSKART

PRODUKTKATEGORIER

BESTILLING

KUNDE SERVICE

Velkommen!

Velkommen til Brownells.no, Norges ledende leverandør av våpenrelaterte produkter, våpendeler, børsemakerverktøy, ladeverktøy, ladeutstyr og ladekomponenter!

Vårt kundeløfte:

Uansett om du bare liker å skyte, har våpen som hobby, er børsemaker og reparerer våpen daglig eller bare eier et våpen er dette siden for deg! I over 75 år har skyttere, profesjonelle børsemakere, hobby utøvere, militæret, politiet og våpenreparatører kommet til Brownells for å finne produkter og deler av høy kvalitet. Hos oss finner du over 40 000 produkter inkludert unike våpendeler, tilbehør, børsemakerverktøy, ladeverktøy, ladeutstyr, komponenter, ammunisjon og andre produkter for å vedlikeholde, reparere eller oppgradere dine våpen.

Priser inkl. mva. pluss levering

Klassisk visning

Mobilvisning