Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge
812526021298 100023906
A Premium-Grade Barrel for Serious Target Shooters
The Bravo Company BCM Mk12 18" Stainless Steel Barrel kit enables you to upgrade your AR-15 with the same barrel BCM puts on their Precision rifles. The barrel comes ready to install on your rifle, with BCM low-profile gas block and a gas tube. The BCM Mk12 barrel is machined from extra-hard 410 stainless steel that is more corrosion-resistant than the 416 stainless alloy commonly used on rifle barrels and has a tough, abrasion-resistant, anti-friction IonBond PVD finish. Bravo Company’s BCM Mk12 18" Stainless Steel Barrel comes with a 5.56 NATO match (USMC SAM-R) chamber and hand-lapped 1-8" button rifling for superb accuracy potential. M4-type feed ramps ensure the rounds make their way into that chamber consistently and reliably. Phosphate finished mil-spec low profile gas block Rifle-length gas system for gentler, reliable cycling 18" length gives a balance of compactness and additional velocity for improved long-range performance .750" O.D. at gas port Barrel extension included & installed 1/2"-28 tpi muzzle threads (muzzle device not included) The Bravo Company BCM Mk 12 18" Stainless Steel Barrel has a mid-weight profile to so it’s rigid enough to resist accuracy-compromising heat warpage but not so heavy it makes the rifle a pain to lug around!
7199 7199 1 NOK
Produktnr.: 100023906
BRAVO COMPANY MK12 18" STAINLESS STEEL RIFLE LENGTH GAS SYSTEM
Produsentnr.: BCM18SSKIT 812526021298 Bravo Company BCM Mk12 18" Stainless Steel løpet settet lar deg oppgradere din AR-15 med samme løp som BCM bruker på sine Precision rifler. Løpet er klart til å monteres på riflen din, med BCM lavprofil gassblokk og en gassrør. BCM Mk12 løpet er maskinert fra ekstra hardt 410 rustfritt stål som er mer korrosjonsbestandig enn 416 rustfritt legering som vanligvis brukes på rifleløp, og har en tøff, slitesterk, antifriksjon IonBond PVD overflatebehandling. Bravo Companys BCM Mk12 18" Stainless Steel løp kommer med et 5.56 NATO match (USMC SAM-R) kammer og hånd-lappet 1-8" knapp rifling for suverent nøyaktighetspotensial. M4-type mating ramper sikrer at patronene finner veien til kammeret konsekvent og pålitelig. Fosfat-finish mil-spec lavprofil gassblokk Rifle-lengde gassystem for mildere, pålitelig sykling 18" lengde gir en balanse av kompakthet og tilleggs hastighet for forbedret langdistanse ytelse .750" O.D. ved gassport Løpsforlenger inkludert & installert 1/2"-28 tpi munningstråder (munning enhet ikke inkludert) Bravo Company BCM Mk 12 18" Stainless Steel løpet har en midtvekt profil slik at det er stivt nok til å motstå nøyaktighet-kompromitterende varmeforvrengning, men ikke så tungt at det gjør riflen til en plage å bære rundt!
7199 NOK 4 kr 7 199,00 *
Leveringstid ca. 14-21 dager.
4 stk. på lageret i USA
Spesifikasjoner: Cartridge: 5.56 mm NATO Contour: M4 Finish: Silver Gas System Length: Rifle Lengde: 18'' Make: AR-15 Muzzle Threads: 1/2-28 Twist: 1-8

Vilkår for kjøp

  • Krav til kjøpetillatelse eller våpenkort og legitimasjon dersom kjøper har våpen i samme kaliber. (Original kjøpetillatelse må sendes pr post. Ordre blir ikke effektuert før kjøpetillatelse eller annen dokumentasjon foreligger))

Attributes

Cartridge: 5.56 mm NATO Contour: M4 Finish: Silver Gas System Length: Rifle Length: 18'' Make: AR-15 Muzzle Threads: 1/2-28 Twist: 1-8 Leveringsvekt: 1,361kg Frakthøyde: 71mm Fraktbredde: 74mm Fraktlengde: 516mm

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.c




A Premium-Grade Barrel for Serious Target Shooters
The Bravo Company BCM Mk12 18" Stainless Steel Barrel kit enables you to upgrade your AR-15 with the same barrel BCM puts on their Precision rifles. The barrel comes ready to install on your rifle, with BCM low-profile gas block and a gas tube. The BCM Mk12 barrel is machined from extra-hard 410 stainless steel that is more corrosion-resistant than the 416 stainless alloy commonly used on rifle barrels and has a tough, abrasion-resistant, anti-friction IonBond PVD finish. Bravo Company’s BCM Mk12 18" Stainless Steel Barrel comes with a 5.56 NATO match (USMC SAM-R) chamber and hand-lapped 1-8" button rifling for superb accuracy potential. M4-type feed ramps ensure the rounds make their way into that chamber consistently and reliably. Phosphate finished mil-spec low profile gas block Rifle-length gas system for gentler, reliable cycling 18" length gives a balance of compactness and additional velocity for improved long-range performance .750" O.D. at gas port Barrel extension included & installed 1/2"-28 tpi muzzle threads (muzzle device not included) The Bravo Company BCM Mk 12 18" Stainless Steel Barrel has a mid-weight profile to so it’s rigid enough to resist accuracy-compromising heat warpage but not so heavy it makes the rifle a pain to lug around!
Nyhetsbrev