Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge
810033781261 100025392
The Easy-To-Install Upgrades That ll Make Your AR Easier To Operate Safely
The Battle Arms Enhanced Lower Parts Kit contains three components that will make operation of your AR-15’s controls faster, easier, and smoother, so you’ll have better control over your rifle, especially in speed-critical situations. This kit contains 3 important Battle Arms parts: BAD-E4S-IC Enhanced Single-Side Safety Selector has the deeply textured, slightly oversized paddle of the ambidextrous "BAD-ASS" selector, but only on the right side. For shooters who do not need ambidextrous controls, this selector helps them engage/disengage the safety quickly. This is a 2-position semi-auto safety with 0 deg. & 90 deg. positions. BAD-EMC-IC Enhanced Magazine Catch is more robust and lighter than the mil-spec AR-15 mag catch. Its shorter post causes the mag release button to sit lower in the receiver, making it less likely you’ll accidentally bump it and dump your mag at the wrong moment. Compatible with the standard mil-spec mag release button, as well as Battle Arms BAD-EMR, BAD-EMMR, and similar buttons. BAD-EBC-IC Enhanced Bolt Catch offers a much larger contact surface than the standard mil-spec part, so it’s easier to locate the control and release the bolt when you’re under stress. Pronounced serrations running in two directions provide a non-slip contact surface, while the raised T-shaped heel aids in secure bolt lock back. Compatible with Norgon Ambi-Catch. Bolt catch ONLY - roll pin, detent & spring NOT included. All three components share the same sturdy construction to ensure years of reliable service: Easy-to-install drop-in replacements for factory parts 8620 carbon steel (investment cast), heat-treated for hardness Matte black phosphate finish matches most black-anodized receiver Fit standard mil-spec AR-15 lower receiver This Enhanced Lower Parts Kit consists only of these three parts, so it’s not a complete LPK with all the small internal parts, but don’t worry, Brownells sells a number of those. What the Battle Arms kit will do is improve your ability to operate your AR-15 quickly, reliably, and safely.
699 699 1 NOK
Produktnr.: 100025392
BATTLE ARMS DEVELOPMENT INC. AR-15 INVESTMENT CAST ENHANCED LOWER PARTS KIT
Produsentnr.: BADLPKPK3 810033781261 Battle Arms Enhanced Lower Parts Kit inneholder tre komponenter som vil gjøre betjeningen av kontrollene på din AR-15 raskere, enklere og jevnere, slik at du får bedre kontroll over riflen, spesielt i situasjoner hvor hastighet er kritisk. Dette kittet inneholder 3 viktige Battle Arms-deler: BAD-E4S-IC Enhanced Single-Side Safety Selector har den dypt teksturerte, litt overdimensjonerte paddelen til den ambidextre "BAD-ASS"-velgeren, men kun på høyre side. For skyttere som ikke trenger ambidekstrale kontroller, hjelper denne velgeren dem med å engasjere/deaktivere sikkerhetsmekanismen raskt. Dette er en 2-posisjons semi-auto sikkerhetsmekanisme med 0 grader & 90 grader posisjoner. BAD-EMC-IC Enhanced Magazine Catch er mer robust og lettere enn mil-spec AR-15 magasinfangsten. Den kortere posten gjør at magasinutløserknappen sitter lavere i mottakeren, noe som gjør det mindre sannsynlig at du ved et uhell vil støte til den og miste magasinet ditt i feil øyeblikk. Kompatibel med standard mil-spec magasinutløserknapp, samt Battle Arms BAD-EMR, BAD-EMMR og lignende knapper. BAD-EBC-IC Enhanced Bolt Catch tilbyr en mye større kontaktflate enn standard mil-spec delen, så det er enklere å lokalisere kontrollen og frigi sluttstykket når du er under stress. Uttalte serrasjoner som går i to retninger gir en sklisikker kontaktflate, mens den opphøyde T-formede hælen bidrar til sikker låsing av sluttstykket. Kompatibel med Norgon Ambi-Catch. Kun sluttstykket - splint, detent & fjær er IKKE inkludert. Alle tre komponentene deler samme robuste konstruksjon for å sikre årevis med pålitelig tjeneste: Enkle å installere som direkte erstatninger for fabrikkdeler 8620 karbonstål (investment cast), varmebehandlet for hardhet Matt svart fosfatfinish matcher de fleste svart-anodiserte mottakere Passer standard mil-spec AR-15 nedre mottaker Dette Enhanced Lower Parts Kit består kun av disse tre delene, så det er ikke et komplett LPK med alle de små interne delene, men ikke bekymre deg, Brownells selger en rekke av disse. Det Battle Arms-kittet vil gjøre er å forbedre din evne til å betjene din AR-15 raskt, pålitelig og trygt.
699 NOK 3 kr 699,00 *
Leveringstid ca. 14-21 dager.
3 stk. på lageret i USA
Spesifikasjoner: Make: AR-15

Attributes

Make: AR-15 Leveringsvekt: 0,045kg Frakthøyde: 25mm Fraktbredde: 51mm Fraktlengde: 102mm

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.x




The Easy-To-Install Upgrades That ll Make Your AR Easier To Operate Safely
The Battle Arms Enhanced Lower Parts Kit contains three components that will make operation of your AR-15’s controls faster, easier, and smoother, so you’ll have better control over your rifle, especially in speed-critical situations. This kit contains 3 important Battle Arms parts: BAD-E4S-IC Enhanced Single-Side Safety Selector has the deeply textured, slightly oversized paddle of the ambidextrous "BAD-ASS" selector, but only on the right side. For shooters who do not need ambidextrous controls, this selector helps them engage/disengage the safety quickly. This is a 2-position semi-auto safety with 0 deg. & 90 deg. positions. BAD-EMC-IC Enhanced Magazine Catch is more robust and lighter than the mil-spec AR-15 mag catch. Its shorter post causes the mag release button to sit lower in the receiver, making it less likely you’ll accidentally bump it and dump your mag at the wrong moment. Compatible with the standard mil-spec mag release button, as well as Battle Arms BAD-EMR, BAD-EMMR, and similar buttons. BAD-EBC-IC Enhanced Bolt Catch offers a much larger contact surface than the standard mil-spec part, so it’s easier to locate the control and release the bolt when you’re under stress. Pronounced serrations running in two directions provide a non-slip contact surface, while the raised T-shaped heel aids in secure bolt lock back. Compatible with Norgon Ambi-Catch. Bolt catch ONLY - roll pin, detent & spring NOT included. All three components share the same sturdy construction to ensure years of reliable service: Easy-to-install drop-in replacements for factory parts 8620 carbon steel (investment cast), heat-treated for hardness Matte black phosphate finish matches most black-anodized receiver Fit standard mil-spec AR-15 lower receiver This Enhanced Lower Parts Kit consists only of these three parts, so it’s not a complete LPK with all the small internal parts, but don’t worry, Brownells sells a number of those. What the Battle Arms kit will do is improve your ability to operate your AR-15 quickly, reliably, and safely.
Nyhetsbrev