Din handlekurv er tom.

Handlekurv

37 17 00 00

Meld på nyhetsbrev

WEIGAND COMBAT
1911 EXTRACTOR TENSIONING TOOL

957000037

Improves Case Feeding, Extraction & Ejection

Easily puts just the right bend in the extractor, without over-bending, for precise tension adjustment, right to the ounce. Use in conjunction with the Weigand Extractor Tension Gauges to fine tune the extractor for optimum extraction and feeding reliability. Carry in your range bag to keep the extractor performing its best.

SPECS: Aluminum, natural finish. 2¾" long. Instructions included.

Mer...

Forbedrer mating av hylse, ekstraksjon og utkastning

Gir enkelt akkurat den riktige bøyen i extractoren, uten å overbøye, for presis justering av spenningen, helt ned til unse. Bruk i kombinasjon med Weigand Extractor Tension Gauges for å finjustere extractoren for optimal ekstraksjon og pålitelighet ved mating. Ha den i skytevesken din for å holde extractoren i topp stand.

SPECS: Aluminium, naturlig finish. 2¾" lang. Instruksjoner inkludert.

Mer...

Kundevurderinger for WEIGAND COMBAT EXTRACTOR TENSIONING TOOL

Antall vurderinger: 9
Fra brownells.com: 9
Gjennomsnittsvurdering: 4,9

John Browning Would be Proud! (19.03.2010)

If you perform your own maintenance on your 1911 pistol, this is one tool you must own.

Your 1911's extractor is a critical component of your American legend and one that must be kept in prime condition if you expect it to perform reliably.

This tool, along with Weigand's extractor gauge set (very inexpensive) and an RCBS trigger pull gauge (also inexpensive)will allow you to easily and accurately determine and adjust your extractor's tension to just the right amount each and every time. No muss, no fuss, no guesswork.

This ingenius American-Made tool is inexpensive, and is for all practical purposes a hand-held arbor press. The accompanying instuctions make the set so simple to use that even a caveman can do it!

Weigand's extractor tool does exactly what he says it will. John Browning would be proud!

excellent tool (26.06.2010)

It is the right tool for your internal extractor, don't have to struggle with pliers and guessing. Excellent service! Received in three days.

Nice product, easy to use (31.08.2010)

Well machined tool, Made in the USA a plus! Instructions were easy to follow, great product. (Used in conjunction with ETG set from same company)

1911 auto extractor tensioning tool (12.09.2011)

I like the tool, it made adjusting the tension on the extractor very easy. I found the 1.5 inch 1/4-28 cap screw to be too short to adjust a 9 mmm (1911a1) properly. I substituted a 1.75 inch 1/4-28 cap screw which I cut the threads the full length of the cap screw. This gave me plenty of adjustment space to work with.

Great tool for making job easier (30.10.2012)

Great invention by Jack Weigand.
Makes setting precise extractor tension a breeze - no bending on the frame. Can even unbend if you go too much.

Suggest with the extractor tension gauges for a great set.

What a time saver! (01.12.2012)

I was really hesitant to purchase one of these at first because I did not want to spend the money on this, the tension gauge set, and a trigger pull gauge, but after months of failure to extracts from about 30% of my rounds I finally got fed up and forked the cash over. Now I am wishing I had not waited so long!

If you are experiencing symptoms of brass stovepiping in the ejection port, hitting your face or head, or even just never leaving the chamber at all, there is a very high probability that your extractor does not have enough tension and this gauge set will help you correct it.

First, let me say not to waste your time and efforts in following the DIY solutions given on YouTube. You will spend too long guessing and you will end up wasting your time and getting frustrated when you have to retune to your extractor every few weeks.

This tool is extremely easy to use! It even has groves so that your extractor sits in the correct position. Once you figure the proper positioning of the screw, you can lock it in place so the next time you need to do any readjustments, it is already in place for you.

I would highly recommend you get the tension gauge set along with this to adjust your extractor. It is very inexpensive and once you figuring out how to use everything, it will only take a few minutes to correct your tension, instead of the many hours to weeks of trial and error you would have wasted on guessing.

EAT! (06.02.2016)

Perfect tool. No more vice and hammer guessing or trying to bend in frame. Should of bought one years ago.

Allows precise tension (24.09.2016)

Started with a straight new extractor. This tool allowed precise adjustment and consistent pull test within 1-2 oz's. Like other tools for a specific job, this one fits the bill perfectly. Highly recommend for getting the ejector properly tuned.

Worth Every Penny (30.03.2018)

It took about an hour the 1st time I used it. But I took my time and it Works. Tuned the extractor on an ATI Titan 3" Officer model 1911. It would not extract at all until I tuned the extractor with this tool, the Gauge set, and a trigger pull gauge. Set it at 26 ounces and it worked perfect. From the factory it was only 12 ounces. Not nearly enough

<img width="500" src='/userdocs/reviewimages/fa0470fc-17c7-4c1b-ba4e-7e6fd60a9be1.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/e6285fb7-0a2e-44a4-ab63-c2718629445b.jpg' alt=''>

Les 9 flere anmeldelser fra brownells.com

899 899 1 NOK

Produktnr.: 957000037
WEIGAND COMBAT EXTRACTOR TENSIONING TOOL
Produsentnr.: EAT Gir enkelt akkurat den riktige bøyen i extractoren, uten å overbøye, for presis justering av spenningen, helt ned til unse. Bruk i kombinasjon med Weigand Extractor Tension Gauges for å finjustere extractoren for optimal ekstraksjon og pålitelighet ved mating. Ha den i skytevesken din for å holde extractoren i topp stand.

899 NOK 82 kr 899,00 *

Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA

Spesifikasjoner: Make: 1911 Modell: Government, Commander, Officers

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Attributes

Make: 1911 Modell: Commander,Government,Officers Leveringsvekt: 0,159kg Frakthøyde: 28mm Fraktbredde: 81mm Fraktlengde: 145mm

Elementdetaljer

Made in USA

Improves Case Feeding, Extraction & Ejection

SPECS: Aluminum, natural finish. 2¾" long. Instructions included.

Mer...

Forbedrer mating av hylse, ekstraksjon og utkastning

SPECS: Aluminium, naturlig finish. 2¾" lang. Instruksjoner inkludert.

Mer...

Kundevurderinger for WEIGAND COMBAT EXTRACTOR TENSIONING TOOL

Antall vurderinger: 9
Fra brownells.com: 9
Gjennomsnittsvurdering: 4,9

John Browning Would be Proud! (19.03.2010)

excellent tool (26.06.2010)

It is the right tool for your internal extractor, don't have to struggle with pliers and guessing. Excellent service! Received in three days.

Nice product, easy to use (31.08.2010)

Well machined tool, Made in the USA a plus! Instructions were easy to follow, great product. (Used in conjunction with ETG set from same company)

1911 auto extractor tensioning tool (12.09.2011)

Great tool for making job easier (30.10.2012)

What a time saver! (01.12.2012)

EAT! (06.02.2016)

Perfect tool. No more vice and hammer guessing or trying to bend in frame. Should of bought one years ago.

Allows precise tension (24.09.2016)

Worth Every Penny (30.03.2018)

Les 9 flere anmeldelser fra brownells.com

Kunder kjøpte også

WEIGAND COMBAT EXTRACTOR TENSION GAUGE SET
EXTRACTOR TENSION GAUGE SET

WEIGAND COMBAT

På lager

kr 599,00 *

Ekstraktor verktøy

4,8

BROWNELLS .060" (1.5MM) REPLACEMENT ROD, GREEN
FIBER OPTIC REPLACEMENT RODS

BROWNELLS

På lager

kr 189,00 * kr 149,00 - kr 189,00*

Replacement Sight Inserts

LYMAN PISTOL PUNCH SET
PISTOL PUNCH SET

LYMAN

På lager

kr 499,00 *

Puncher

LYMAN ELECTRONIC TRIGGER PULL GAUGE
ELECTRONIC TRIGGER PULL GAUGE

LYMAN

På lager

kr 1 349,00 *

Avtrekksvekter og måleverktøy

4,4

SCHUSTER M1 ADJUSTABLE GAS SYSTEM
MA ADJUSTABLE GAS SYSTEM

SCHUSTER

Kommer til lager

kr 999,00 * kr 999,00 - kr 1 249,00*

4,8

Logg inn

Glemt passord?
Registrere

CONNECT

NETTSTEDSKART

PRODUKTKATEGORIER

BESTILLING

KUNDE SERVICE

Velkommen!

Velkommen til Brownells.no, Norges ledende leverandør av våpenrelaterte produkter, våpendeler, børsemakerverktøy, ladeverktøy, ladeutstyr og ladekomponenter!

Vårt kundeløfte:

Uansett om du bare liker å skyte, har våpen som hobby, er børsemaker og reparerer våpen daglig eller bare eier et våpen er dette siden for deg! I over 75 år har skyttere, profesjonelle børsemakere, hobby utøvere, militæret, politiet og våpenreparatører kommet til Brownells for å finne produkter og deler av høy kvalitet. Hos oss finner du over 40 000 produkter inkludert unike våpendeler, tilbehør, børsemakerverktøy, ladeverktøy, ladeutstyr, komponenter, ammunisjon og andre produkter for å vedlikeholde, reparere eller oppgradere dine våpen.