Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

fraktprisen_topp_970_50

10-8 PERFORMANCE LLC 1911 ARMORER'S BLOCK


Auto-oversatt beskrivelse (Beskrivelse - Produsent): Hendig benk blokk maskinert fra super-tøff, glassfiber-armert nylon støtter 1911 pistol komponenter slik at du kan utføre en rekke reparasjon, montering/demontering og accurizing oppgaver raskt og enkelt. Sikkert har rammen på siden, slik at du kan arbeide på den uten risiko for skade finish. Mer...

100004369
For Fast, Easy Maintenance, While Protecting Pistol & Hands From Damage
Handy bench block machined from super-tough, glass-reinforced nylon supports 1911 pistol components so you can perform a variety of repair, assembly/disassembly, and accurizing tasks quickly and easily. Securely holds the frame on its side, so you can work on it without risk of damaging the finish. Helps you check hammer/sear engagement, remove hammer strut pin, remove mainspring housing, and holds thumb safety for easy filing of sear stop stud engagement surface. Use to tension the extractor off the slide, so you don’t risk scratching the slide, and retain the extractor while filing and honing the claw. Holds the barrel during link pin removal, with blind holes to catch the pins so they don’t get lost. You can even place the frame between two blocks and clamp it in a bench vise for slide fitting.

SPECS: Glass-reinforced nylon, black. 4” long (10.2cm) x 4” wide x 1¼” (3.2cm) high.

10-8 PERFORMANCE LLC
927 927 1 NOK
100004369
Armorer's Block
Produsentnr.: BLOCK Hendig benk blokk maskinert fra super-tøff, glassfiber-armert nylon støtter 1911 pistol komponenter slik at du kan utføre en rekke reparasjon, montering/demontering og accurizing oppgaver raskt og enkelt. Sikkert har rammen på siden, slik at du kan arbeide på den uten risiko for skade finish. Kan du sjekke hammer/svi engasjement, fjerne hammer spankulere pin, fjerne hovedkilden bolig og holder thumb sikkerhet for enkel innlevering av svi stopp stud engasjement overflate. Bruk å stramme extractor av lysbildet, slik at du ikke risikerer skrape lysbildet og beholde extractor mens innlevering og finslipe claw. Holder fat under linken pin fjerning, med blind hull å fange pinnene slik at de ikke blir borte. Du kan selv plasser rammen mellom to blokker og klemme det i en benk vise for lysbildet montering.
927 NOK 20 kr 927,00 *

10+ på lager
Spesifikasjoner: Make: 1911 Model: Government, Commander, Officers

Attributes

Make: 1911 Model: Commander,Government,Officers

Elementdetaljer

Made in USA





For Fast, Easy Maintenance, While Protecting Pistol & Hands From Damage
Handy bench block machined from super-tough, glass-reinforced nylon supports 1911 pistol components so you can perform a variety of repair, assembly/disassembly, and accurizing tasks quickly and easily. Securely holds the frame on its side, so you can work on it without risk of damaging the finish. Helps you check hammer/sear engagement, remove hammer strut pin, remove mainspring housing, and holds thumb safety for easy filing of sear stop stud engagement surface. Use to tension the extractor off the slide, so you don’t risk scratching the slide, and retain the extractor while filing and honing the claw. Holds the barrel during link pin removal, with blind holes to catch the pins so they don’t get lost. You can even place the frame between two blocks and clamp it in a bench vise for slide fitting.

SPECS: Glass-reinforced nylon, black. 4” long (10.2cm) x 4” wide x 1¼” (3.2cm) high.