Decapping dies are used to remove spent primers from fired cases prior to cleaning. We carry a selection of decapping dies from Sinclair, Redding, RCBS and Lee. All these dies will decap standard cases from 22 to 45 caliber. Redding offers a separate die for cases longer than 2.5 inch and an optional decap rod for their small decap die for PPC, BR, 17, and 20 caliber cases. The Lee and RCBS dies are for standard cases only. The new Sinclair Stainless Decap Die includes pins for standard and PPC/BR flash holes, and an optional rod is available for 17 and 20 caliber cases. Heavy Duty Die is designed for use on Military primer crimped cases larger than .27 caliber.
Mer...
Avfyringsmatriser brukes til å fjerne brukte tennhetter fra avfyrte hylser før rengjøring. Vi har et utvalg av avfyringsmatriser fra Sinclair, Redding, RCBS og Lee. Alle disse matrisene vil avfyre standard hylser fra 22 til 45 kaliber. Redding tilbyr en separat matrise for hylser lengre enn 2,5 tommer og en valgfri avfyringsstang for deres lille avfyringsmatrise for PPC, BR, 17 og 20 kaliber hylser. Lee og RCBS matrisene er kun for standard hylser. Den nye Sinclair Stainless Decap Die inkluderer pinner for standard og PPC/BR tennhull, og en valgfri stang er tilgjengelig for 17 og 20 kaliber hylser. Heavy Duty Die er designet for bruk på militære tennhette krympede hylser større enn .27 kaliber.
Mer...
Kundevurderinger for RCBS HEAVY DUTY DECAPPING DIE DECAPPING ASSEMBLY 27-45 CAL
Antall vurderinger: 3
Fra brownells.com: 3
Gjennomsnittsvurdering: 2,3
Not a complete decap unit.(08.01.2016)
This is just the assembly that goes into the die. I bought this by mistake as I thought it was a complete unit. It has the spring tip as described in the decap die that has a review about breaking the spring.
Great Customer Service, terrible product(10.12.2014)
I bought one of these and decapped ~1000 rounds of 40 before the spring behind the pin got crushed. I emailed RCBS and they volunteered to send me a new pin and new spring. What I actually got was an entire new decapping punch assembly, 4 additional pins, and 3 additional springs. Great! Except, by the time I had decapped 1000 9mm rounds, I had gone through 2 springs already. In another 50, I went through a 3rd. I am on my last spring now and afraid to pull the handle. I have to hand it to RCBS on their customer service, but the design of this die is just not good. the pin hits the primer, compresses the spring and somewhere along the point of the spring compressing, it pops the primer out at light speed. if you run into any but the easiest of primers, however, the spring has to fully compress in order to knock the primer out, and it actually over compresses and gets crunched up inside the punch assembly.
Good product Awesome customer service(25.08.2014)
I picked up this decapping die when I first got into reloading. It makes short work of MOST of the primers and brass. I have only had issues with some 7.62 NATO rounds that have the primer crimped in (even then it's only a few that give me trouble). I'm impressed with the quality but the customer service was just awesome. When I first got this die, I was new to reloading. I was depriming a bunch of .44 Mag brass and without changing the shell holder I put in a 10mm case. The decapping pin didn't go through the flash hole and I broke it. I called RCBS and explained my rookie mistake, the guy on the other end had a laugh and told me he would replace the pin free of charge and send me an extra in case I pull a Dilbert again. Since then, I have had no issues with the product.
Produktnr.: 749015616 RCBS HEAVY DUTY DECAPPING DIE DECAPPING ASSEMBLY 27-45 CAL Produsentnr.: 87586076683875860 Avfyringsmatriser brukes til å fjerne brukte tennhetter fra avfyrte hylser før rengjøring. Vi har et utvalg av avfyringsmatriser fra Sinclair, Redding, RCBS og Lee. Alle disse matrisene vil avfyre standard hylser fra 22 til 45 kaliber. Redding tilbyr en separat matrise for hylser lengre enn 2,5 tommer og en valgfri avfyringsstang for deres lille avfyringsmatrise for PPC, BR, 17 og 20 kaliber hylser. Lee og RCBS matrisene er kun for standard hylser. Den nye Sinclair Stainless Decap Die inkluderer pinner for standard og PPC/BR tennhull, og en valgfri stang er tilgjengelig for 17 og 20 kaliber hylser. Heavy Duty Die er designet for bruk på militære tennhette krympede hylser større enn .27 kaliber.
239NOK2kr 239,00
*
Leveringstid ca. 14-21 dager. 2 stk. på lageret i USA
Produktnr.: 749002676 RCBS UNIVERSAL DECAPPING DIE .22-25 CALIBER Produsentnr.: 87580076683875808 Avfyringsmatriser brukes til å fjerne brukte tennhetter fra avfyrte hylser før rengjøring. Vi har et utvalg av avfyringsmatriser fra Sinclair, Redding, RCBS og Lee. Alle disse matrisene vil avfyre standard hylser fra 22 til 45 kaliber. Redding tilbyr en separat matrise for hylser lengre enn 2,5 tommer og en valgfri avfyringsstang for deres lille avfyringsmatrise for PPC, BR, 17 og 20 kaliber hylser. Lee og RCBS matrisene er kun for standard hylser. Den nye Sinclair Stainless Decap Die inkluderer pinner for standard og PPC/BR tennhull, og en valgfri stang er tilgjengelig for 17 og 20 kaliber hylser. Heavy Duty Die er designet for bruk på militære tennhette krympede hylser større enn .27 kaliber.
499NOK0kr 499,00
*
Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.
Produktnr.: 100010269 RCBS HEAVY DUTY DECAP DIE .27-45 CALIBER Produsentnr.: 87585076683875853 Avfyringsmatriser brukes til å fjerne brukte tennhetter fra avfyrte hylser før rengjøring. Vi har et utvalg av avfyringsmatriser fra Sinclair, Redding, RCBS og Lee. Alle disse matrisene vil avfyre standard hylser fra 22 til 45 kaliber. Redding tilbyr en separat matrise for hylser lengre enn 2,5 tommer og en valgfri avfyringsstang for deres lille avfyringsmatrise for PPC, BR, 17 og 20 kaliber hylser. Lee og RCBS matrisene er kun for standard hylser. Den nye Sinclair Stainless Decap Die inkluderer pinner for standard og PPC/BR tennhull, og en valgfri stang er tilgjengelig for 17 og 20 kaliber hylser. Heavy Duty Die er designet for bruk på militære tennhette krympede hylser større enn .27 kaliber.
549NOK0kr 549,00
*
Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.
Spesifikasjoner:Cartridge: 270/6.8 mm (.277)Kaliber: 270/6.8 mm (.277)
Decapping dies are used to remove spent primers from fired cases prior to cleaning. We carry a selection of decapping dies from Sinclair, Redding, RCBS and Lee. All these dies will decap standard cases from 22 to 45 caliber. Redding offers a separate die for cases longer than 2.5 inch and an optional decap rod for their small decap die for PPC, BR, 17, and 20 caliber cases. The Lee and RCBS dies are for standard cases only. The new Sinclair Stainless Decap Die includes pins for standard and PPC/BR flash holes, and an optional rod is available for 17 and 20 caliber cases. Heavy Duty Die is designed for use on Military primer crimped cases larger than .27 caliber.
Mer...
Avfyringsmatriser brukes til å fjerne brukte tennhetter fra avfyrte hylser før rengjøring. Vi har et utvalg av avfyringsmatriser fra Sinclair, Redding, RCBS og Lee. Alle disse matrisene vil avfyre standard hylser fra 22 til 45 kaliber. Redding tilbyr en separat matrise for hylser lengre enn 2,5 tommer og en valgfri avfyringsstang for deres lille avfyringsmatrise for PPC, BR, 17 og 20 kaliber hylser. Lee og RCBS matrisene er kun for standard hylser. Den nye Sinclair Stainless Decap Die inkluderer pinner for standard og PPC/BR tennhull, og en valgfri stang er tilgjengelig for 17 og 20 kaliber hylser. Heavy Duty Die er designet for bruk på militære tennhette krympede hylser større enn .27 kaliber.
Mer...
Kundevurderinger for RCBS HEAVY DUTY DECAPPING DIE DECAPPING ASSEMBLY 27-45 CAL
Antall vurderinger: 3
Fra brownells.com: 3
Gjennomsnittsvurdering: 2,3
Not a complete decap unit.(08.01.2016)
This is just the assembly that goes into the die. I bought this by mistake as I thought it was a complete unit. It has the spring tip as described in the decap die that has a review about breaking the spring.
Great Customer Service, terrible product(10.12.2014)
I bought one of these and decapped ~1000 rounds of 40 before the spring behind the pin got crushed. I emailed RCBS and they volunteered to send me a new pin and new spring. What I actually got was an entire new decapping punch assembly, 4 additional pins, and 3 additional springs. Great! Except, by the time I had decapped 1000 9mm rounds, I had gone through 2 springs already. In another 50, I went through a 3rd. I am on my last spring now and afraid to pull the handle. I have to hand it to RCBS on their customer service, but the design of this die is just not good. the pin hits the primer, compresses the spring and somewhere along the point of the spring compressing, it pops the primer out at light speed. if you run into any but the easiest of primers, however, the spring has to fully compress in order to knock the primer out, and it actually over compresses and gets crunched up inside the punch assembly.
Good product Awesome customer service(25.08.2014)
I picked up this decapping die when I first got into reloading. It makes short work of MOST of the primers and brass. I have only had issues with some 7.62 NATO rounds that have the primer crimped in (even then it's only a few that give me trouble). I'm impressed with the quality but the customer service was just awesome. When I first got this die, I was new to reloading. I was depriming a bunch of .44 Mag brass and without changing the shell holder I put in a 10mm case. The decapping pin didn't go through the flash hole and I broke it. I called RCBS and explained my rookie mistake, the guy on the other end had a laugh and told me he would replace the pin free of charge and send me an extra in case I pull a Dilbert again. Since then, I have had no issues with the product.