Two-piece, extended base pad replaces factory pad to increase magazine capacity without compromising reliability. Molded from impact-resistant, fiberglass-reinforced nylon to protect your magazine from damage when ejected onto hard ground or pavement. Checkered bottom panel assists in fast, positive, non-slip, mag changes. Locks securely to the magazine body and lets you retain the factory magazine spring. Removes quickly and easily to reinstall factory pad and return mag to original spec. For low-stress applications where the mag will not be ejected onto hard surfaces. Use the L-shaped locking insert for extra-secure attachment and five additional rounds for 40S&W or an additional six rounds for 9mm. Overall magazine length will remain below 140mm for competition use.
SPECS: Fiberglass-filled nylon, black.
Mer...
To-delt, utvidet bunnplate erstatter fabrikkplaten for å øke magasinkapasiteten uten å gå på akkord med påliteligheten. Støpt av slagfast, fiberglass-forsterket nylon for å beskytte magasinet ditt mot skader når det kastes ut på hardt underlag eller asfalt. Rutet bunnpanel bidrar til raske, positive, sklisikre magasinbytter. Låser seg sikkert til magasinkroppen og lar deg beholde fabrikkens magasinfjær. Fjernes raskt og enkelt for å installere fabrikkplaten på nytt og returnere mag til original spesifikasjon. For anvendelser med lav belastning der mag ikke vil bli kastet ut på harde overflater. Bruk L-formet låseinnsats for ekstra sikker festing og fem ekstra skudd for 40S&W eller seks ekstra skudd for 9mm. Total lengde på magasinet vil forbli under 140mm for konkurransebruk.
SPECS: Fiberglass-forsterket nylon, svart.
Mer...
Kundevurderinger for ARREDONDO PAD FITS 9MM/.40 S&W M&P,5 OR 6 RDS,1-1/4" ADDL MAG OAL
Antall vurderinger: 3
Fra brownells.com: 3
Gjennomsnittsvurdering: 4,7
Works as good as factory original(27.06.2010)
I've never had a problem with the base pads. A bit of a hassle to get on and you have to keep the magazine spring fresh if using OEM length but otherwise you can put these base pads on and forget about them. They stay on the tube too.
I just wish it was metal.(28.06.2014)
For the price these seem very well made.
For the Just started using them, and Iâm pleased so fare.
Time will tell after a number load and reloads of the mag and my S&W9. I just hope they last for the slapping in the mags with the force I use to insert the mag in the gun.
thats amason , great , excelente (09.10.2017)
I ordered 1 just to see what they were all about. The install was a little difficult but it was accomplished without producing a hernia. I do like the way it looks . The additional surface area this provides can be used to increase your " grip purchase " on your firearm.. So for a nominal amount of weight . You can increase mag capacity by approx 34% for a 9mm - 17 round magazine . Thats 6 rounds of 9mm ammo. I wished I would have ordered 2 instead of only 1 , because now as of this review they are back ordered.
Produktnr.: 069000032 ARREDONDO PAD FITS 9MM/.40 S&W M&P,5 OR 6 RDS,1-1/4" ADDL MAG OAL Produsentnr.: S&W/MP9/40 To-delt, utvidet bunnplate erstatter fabrikkplaten for å øke magasinkapasiteten uten å gå på akkord med påliteligheten. Støpt av slagfast, fiberglass-forsterket nylon for å beskytte magasinet ditt mot skader når det kastes ut på hardt underlag eller asfalt. Rutet bunnpanel bidrar til raske, positive, sklisikre magasinbytter. Låser seg sikkert til magasinkroppen og lar deg beholde fabrikkens magasinfjær. Fjernes raskt og enkelt for å installere fabrikkplaten på nytt og returnere mag til original spesifikasjon. For anvendelser med lav belastning der mag ikke vil bli kastet ut på harde overflater. Bruk L-formet låseinnsats for ekstra sikker festing og fem ekstra skudd for 40S&W eller seks ekstra skudd for 9mm. Total lengde på magasinet vil forbli under 140mm for konkurransebruk.
489NOK5kr 489,00
*
Leveringstid ca. 14-21 dager. 5 stk. på lageret i USA
Spesifikasjoner:Make: Smith & WessonModell: M&PStyle: Base Pads
Two-piece, extended base pad replaces factory pad to increase magazine capacity without compromising reliability. Molded from impact-resistant, fiberglass-reinforced nylon to protect your magazine from damage when ejected onto hard ground or pavement. Checkered bottom panel assists in fast, positive, non-slip, mag changes. Locks securely to the magazine body and lets you retain the factory magazine spring. Removes quickly and easily to reinstall factory pad and return mag to original spec. For low-stress applications where the mag will not be ejected onto hard surfaces. Use the L-shaped locking insert for extra-secure attachment and five additional rounds for 40S&W or an additional six rounds for 9mm. Overall magazine length will remain below 140mm for competition use.
SPECS: Fiberglass-filled nylon, black.
Mer...
To-delt, utvidet bunnplate erstatter fabrikkplaten for å øke magasinkapasiteten uten å gå på akkord med påliteligheten. Støpt av slagfast, fiberglass-forsterket nylon for å beskytte magasinet ditt mot skader når det kastes ut på hardt underlag eller asfalt. Rutet bunnpanel bidrar til raske, positive, sklisikre magasinbytter. Låser seg sikkert til magasinkroppen og lar deg beholde fabrikkens magasinfjær. Fjernes raskt og enkelt for å installere fabrikkplaten på nytt og returnere mag til original spesifikasjon. For anvendelser med lav belastning der mag ikke vil bli kastet ut på harde overflater. Bruk L-formet låseinnsats for ekstra sikker festing og fem ekstra skudd for 40S&W eller seks ekstra skudd for 9mm. Total lengde på magasinet vil forbli under 140mm for konkurransebruk.
SPECS: Fiberglass-forsterket nylon, svart.
Mer...
Kundevurderinger for ARREDONDO PAD FITS 9MM/.40 S&W M&P,5 OR 6 RDS,1-1/4" ADDL MAG OAL
Antall vurderinger: 3
Fra brownells.com: 3
Gjennomsnittsvurdering: 4,7
Works as good as factory original(27.06.2010)
I've never had a problem with the base pads. A bit of a hassle to get on and you have to keep the magazine spring fresh if using OEM length but otherwise you can put these base pads on and forget about them. They stay on the tube too.
I just wish it was metal.(28.06.2014)
For the price these seem very well made.
For the Just started using them, and Iâm pleased so fare.
Time will tell after a number load and reloads of the mag and my S&W9. I just hope they last for the slapping in the mags with the force I use to insert the mag in the gun.
thats amason , great , excelente (09.10.2017)
I ordered 1 just to see what they were all about. The install was a little difficult but it was accomplished without producing a hernia. I do like the way it looks . The additional surface area this provides can be used to increase your " grip purchase " on your firearm.. So for a nominal amount of weight . You can increase mag capacity by approx 34% for a 9mm - 17 round magazine . Thats 6 rounds of 9mm ammo. I wished I would have ordered 2 instead of only 1 , because now as of this review they are back ordered.