Over 300 000 kunder - vi takker dere!

40 000+ produkter for jakt og skytesport

EGW
SIG SAUER P220-229, 320 TRIJICON RMR SIGHT MOUNT

841370116553 296000577
THIS MOUNT DOES NOT WORK WITH ANY SIG OPTICS READY PISTOLS (P320 X-CARRY ETC.) Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mount fits (including but not limited to): Sig #8 Sights P220 P224 P225 P225-A1 P226 P227 P228 P229 P238 P239 P245 P320 P938 SP2022 M11-A1 MK25 Bersa Thunder UC Series (9/40/45) Bersa Thunder HC Series (9/40/45) FN 509 This mount does not fit: Sig 1911s Any Optics Ready Sigs i.e. P226 Legion RX, P229 RX, P320 X-Carry etc. P210 Target P365 (The dovetail cut is too deep to work with our mount) FN 509 Tactical Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
1049 1049 1 NOK
Produktnr.: 296000577
EGW SIG SAUER P220-229, 320 TRIJICON RMR SIGHT MOUNT
Produsentnr.: 49518 841370116553 DENNE MONTERINGEN FUNGERER IKKE MED NOEN SIG OPTICS READY PISTOLER (P320 X-CARRY ETC.) Materiale: 7075 Aluminium Belegg: Matt Svart Hardcoat Samlet lengde: 1.780" Samlet bredde: 1.1" Monteringstilbehør: (2) 6-32 Flat Head Skruer, (1) 6-32 X 3/16 Settskrue Rødpunktsikte Passform: Trijicon RMR, Holosun HS507C Denne monteringen passer (inkludert, men ikke begrenset til): Sig #8 Sikter P220 P224 P225 P225-A1 P226 P227 P228 P229 P238 P239 P245 P320 P938 SP2022 M11-A1 MK25 Bersa Thunder UC Series (9/40/45) Bersa Thunder HC Series (9/40/45) FN 509 Denne monteringen passer ikke: Sig 1911s Alle Optics Ready Sig-modeller, f.eks. P226 Legion RX, P229 RX, P320 X-Carry osv. P210 Target P365 (Dovetail-kuttet er for dypt til å fungere med vår montering) FN 509 Tactical Fjern ganske enkelt baksiktet på pistolen din og erstatt det med vår montering for å montere ditt Trijicon RMR rødpunktsikte. Ingen modifikasjoner er nødvendige. Du kan når som helst ta av vår montering og erstatte ditt baksikte. Monteringstilbehør inkludert. Installasjonsinstruksjoner Fjern baksiktet* Installer EGW Sight Mount i dovetail Stram til settskruen (hvis aktuelt) Plasser rødpunktsiktet på EGW Sight Mount (plassering av et lite stykke papir mellom rødpunktsiktet og siktemonteringen vil gjøre fjerning enklere og holde Loctite borte fra rødpunktsiktet.) Påfør blå Loctite på de medfølgende monteringsskruene Momenttiltrekk monteringsskruene til 15in/lbs 2 Flat Head Cap Skruer - Levert for Trijicon RMR Skruene som følger med denne monteringen krever en 5/64'' unbrakonøkkel for installasjon.
1049 NOK 3 kr 1 049,00 *
Leveringstid ca. 14-21 dager.
3 stk. på lageret i USA
Spesifikasjoner: Farge: Black Make: Sig Sauer, FN Material: Aluminum Modell: P226, P229, P238, P220, P938, P320, P225, P228, P224, P245, P227, P239, SP2022, 509 Number of Bases: 1-Piece Style: Tactical

Top takeaways

  1. Monteringen passer til flere Sig Sauer-modeller som P220, P229, P320, samt FN 509, men fungerer ikke med Sig Optics Ready pistoler.
  2. Materiale: 7075 Aluminium med matt svart hardcoat, og inkluderer monteringsskruer og settskrue for enkel installasjon uten modifikasjoner.
  3. Passer til Trijicon RMR og Holosun HS507C rødpunktsikter, og installasjon krever en 5/64'' unbrakonøkkel og blå Loctite for montering.

Attributes

Farge: Black Make: FN,Sig Sauer Material: Aluminum Modell: 509,P220,P224,P225,P226,P227,P228,P229,P238,P239,P245,P320,P938,SP2022 Number of Bases: 1-Piece Style: Tactical Leveringsvekt: 0,031kg Frakthøyde: 25mm Fraktbredde: 89mm Fraktlengde: 140mm UPC : 841370116553

Elementdetaljer

Made in USA




Oppgrader din Sig Sauer med EGW RMR Sight Mount! 🛠️ Enkel installasjon for Trijicon RMR. Passer flere modeller, se detaljer!

THIS MOUNT DOES NOT WORK WITH ANY SIG OPTICS READY PISTOLS (P320 X-CARRY ETC.) Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mount fits (including but not limited to): Sig #8 Sights P220 P224 P225 P225-A1 P226 P227 P228 P229 P238 P239 P245 P320 P938 SP2022 M11-A1 MK25 Bersa Thunder UC Series (9/40/45) Bersa Thunder HC Series (9/40/45) FN 509 This mount does not fit: Sig 1911s Any Optics Ready Sigs i.e. P226 Legion RX, P229 RX, P320 X-Carry etc. P210 Target P365 (The dovetail cut is too deep to work with our mount) FN 509 Tactical Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
0
På lager
kr 749,00
0
På lager
kr 699,00 kr 699,00 - kr 749,00
0
På lager
kr 749,00
Tilbake til toppen