Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

EGW
EAA SUPER SIGHT VORTEX VIPER/VENOM SIGHT MOUNT

841370114207 296000658
EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation. Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount will not work with EAA Tanfoglio Witness.
0 0 1 NOK
Produktnr.: 296000658
EGW EAA SUPER SIGHT VORTEX VIPER/VENOM SIGHT MOUNT
Produsentnr.: 49306 841370114207 EGW rødpunktsikter er ment for å installeres fra venstre mot høyre (med munningen vendt fremover). Sporet har en progressiv avsmalning for å tillate enklere installasjon. Fjern bare baksiktet på våpenet ditt og erstatt det med EGW-monteringen for å montere ditt Vortex Viper/Venom, Burris FastFire eller Docter rødpunktsikte. Du kan når som helst ta av monteringen og erstatte baksiktet. Monteringsutstyr inkludert. Installasjonsinstruksjoner Fjern baksiktet* Installer EGW Siktemontering i spor Sett inn og stram sett skruen (hvis aktuelt) Plasser rødpunktsiktet på EGW Siktemontering (plassering av et lite stykke papir mellom rødpunktsiktet og siktemonteringen vil gjøre fjerning enklere og vil holde Loctite borte fra rødpunktsiktet.) Påfør blå Loctite på de medfølgende monteringsskruene Dra monteringsskruene til med et dreiemoment på 15in/lbs 2 knappehodeskruer - Levert for Vortex Viper og Venom sikter 2 flat hodet skruer - Levert for Burris FastFire og Docter sikter Skruene som følger med denne monteringen krever en 5/64'' unbrakonøkkel for installasjon. Modifisering av våpenet ditt kan oppheve produsentens garanti. Dette produktet bør installeres og sjekkes av en kvalifisert børsemaker. Det uttrykkes ingen ansvar for skade eller skader som kan oppstå som følge av feil installasjon eller bruk av dette produktet. Denne monteringen vil ikke fungere med EAA Tanfoglio Witness.
Varsle ved tilgjengelighet
Ikke tilgjengelig.
Spesifikasjoner: Farge: Black Make: EAA Material: Aluminum Modell: Hunter, P Match Pro, P Match, Stock II Xtreme, Elite Stock II, Limite Custom Xtreme Number of Bases: 1-Piece Style: Tactical

Attributes

Farge: Black Make: EAA Material: Aluminum Modell: P Match Pro,Stock II Xtreme,Elite Stock II,Limite Custom Xtreme,Hunter,P Match Number of Bases: 1-Piece Style: Tactical Leveringsvekt: 0,045kg Frakthøyde: 25mm Fraktbredde: 76mm Fraktlengde: 140mm

Elementdetaljer

Made in USA



EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation. Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount will not work with EAA Tanfoglio Witness.
Nyhetsbrev