Din handlekurv er tom.

Handlekurv

SMART LOCK TECHNOLOGY
SPRINGFIELD XD MAGLOC EASYFIT MAGWELL

625214016205 100006212

For Quick, No-Miss Reloads Under Pressure

Bolt-on magwell funnels magazine directly into the pistol for quick reloads without fumbling or distraction. Lightweight molded polymer won’t mar, scrape, or dent, plus it protects the magwell opening from damage. Just insert into the bottom of the grip and tighten the included steel retention screw for a snug, form-fitting, grip. Separate models available for 9mm/.40 S&W.

SPECS: Molded glass-fill nylon polymer, matte black. 23⁄8" (5.8cm) long. 9mm/.40 S&W - 1.47" (37.5mm) wide. Does not fit compact or sub-compact. May require minor trimming to fit 9mm/.40 S&W models made after March 2005.

Mer...

For Raske, Feilfrie Omladninger Under Press

Bolt-on magasinbrønn som leder magasinet direkte inn i pistolen for raske omladninger uten fomling eller distraksjon. Lett støpt polymer vil ikke merke, ripe, eller bulk, pluss at den beskytter magasinbrønnåpningen mot skader. Bare sett den inn i bunnen av grepet og stram den medfølgende stålfesteskruen for en tett, formsydd, grep. Separate modeller tilgjengelig for 9mm/.40 S&W.

SPECS: Støpt glassfylt nylonpolymer, matt svart. 23⁄8" (5.8cm) lang. 9mm/.40 S&W - 1.47" (37.5mm) bred. Passer ikke kompakte eller sub-kompakte. Kan kreve mindre tilpasning for å passe 9mm/.40 S&W modeller produsert etter mars 2005.

Mer...

Kundevurderinger for SMART LOCK TECHNOLOGY XD EASYFIT MAG WELL, 9MM/.40 S&W

Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 2,9

Too bad it's made out of Nylon (20.04.2011)

Mine broke after 2 or 3 matches because of a bobbled magazine change. Make no mistake, this is made of hard nylon/plastic/polymer/whatever and it can break as mine did. No warranty is mentioned at all...so buyer beware.

It was very easy to install and it did work well with the factory magazines (including the opening at the front for easy mag removal). Just a shame that it is not made of something metal-based. I only bought it because it was the only thing available in Canada.

Easy install and good value. (10.11.2011)

I bought this from the maker in CA before I saw it at Brownells and installed this on my XD Tactical 5" 45 ACP Pistol in less than 5 minutes. It really helps guide fresh mags into the gun and fits the gun and mags well. I am not into Race Gun shooting but I believe this will continue to work well on my primary carry/duty gun.

Not so sure about this product (19.03.2012)

I installed one of these on a duty weapon for a friend of mine. It felt flimsy and shortly broke. I can't recommend this product.

EASY FIT MAG WELL FOR XD (28.04.2014)

I use this on my xd service 45acp works great fits great with no modifcation drop in two screws and your done.

poor fit (09.10.2012)

installed on my xd tac 9mm the tab on it didnt fit at all ended up removing it and using the screw drectly into my grip very flexable and thin felling. way better off getting a metal mag well.

serves its purpose, hole in grip (14.07.2017)

I bought this for my XD 40. It fits the hole at the bottom of the grip but does not take in the whole insert and it creates a gap I have to use a small mallet to push it. The stopper screw at the back of the magwell makes a hole in my grip. I have to put glue to hold the sides of the magwell because it creates a gap on the side. I have to put glue to in between the bottom part of the grip and the magwell to hold it in place because the screw was not able to hold the grip in place it slowly slips. I have to make some resizing of the insert of the magwell so that it will fit the bottom of the grip but despite all these it serves it purpose.

<img width="500" src='/userdocs/reviewimages/449c72f9-e295-43ab-a967-3293195e0a66.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/6894b6be-46d7-47f6-bc90-b93c4d6f95e6.jpg' alt=''>

Not what expected about installation (20.02.2018)

Does not fit as expected. Had to trim a lot and still does not fit well. There is a gap at the bottom. The holding screw only makes a hole on the frame. Bit disappointed indeed.

Les 7 flere anmeldelser fra brownells.com

469 469 1 NOK

Produktnr.: 100006212
SMART LOCK TECHNOLOGY XD EASYFIT MAG WELL, 9MM/.40 S&W
Produsentnr.: NONE 625214016205 Bolt-on magasinbrønn som leder magasinet direkte inn i pistolen for raske omladninger uten fomling eller distraksjon. Lett støpt polymer vil ikke merke, ripe, eller bulk, pluss at den beskytter magasinbrønnåpningen mot skader. Bare sett den inn i bunnen av grepet og stram den medfølgende stålfesteskruen for en tett, formsydd, grep. Separate modeller tilgjengelig for 9mm/.40 S&W.

469 NOK 6 kr 469,00 *

Leveringstid ca. 14-21 dager.
6 stk. på lageret i USA

Spesifikasjoner: Finish: Black Make: Springfield Modell: XD

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

SPRINGFIELD XD MAGLOC EASYFIT MAGWELL gir raske omladninger uten distraksjon ved å lede magasinet direkte inn i pistolen.
Produktet er laget av lett, støpt polymer som beskytter magasinbrønnåpningen mot skader og er enkel å installere med en medfølgende stålfesteskrue.
Passer til 9mm/.40 S&W modeller, men ikke kompakte eller sub-kompakte, og kan kreve mindre tilpasning for modeller produsert etter mars 2005.

Attributes

Finish: Black Make: Springfield Modell: XD Leveringsvekt: 0,014kg Frakthøyde: 10mm Fraktbredde: 102mm Fraktlengde: 163mm

Elementdetaljer

US eksport klassifisering: 0A501.y.1

Oppgrader din Springfield XD med Magloc Easyfit Magwell for raske omladninger! Lett, slitesterk polymer som beskytter magasinbrønnåpningen. 🚀 Lær mer nå!

For Quick, No-Miss Reloads Under Pressure

Mer...

For Raske, Feilfrie Omladninger Under Press

Mer...

Kundevurderinger for SMART LOCK TECHNOLOGY XD EASYFIT MAG WELL, 9MM/.40 S&W

Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 2,9

Too bad it's made out of Nylon (20.04.2011)

Easy install and good value. (10.11.2011)

Not so sure about this product (19.03.2012)

I installed one of these on a duty weapon for a friend of mine. It felt flimsy and shortly broke. I can't recommend this product.

EASY FIT MAG WELL FOR XD (28.04.2014)

I use this on my xd service 45acp works great fits great with no modifcation drop in two screws and your done.

poor fit (09.10.2012)

installed on my xd tac 9mm the tab on it didnt fit at all ended up removing it and using the screw drectly into my grip very flexable and thin felling. way better off getting a metal mag well.

serves its purpose, hole in grip (14.07.2017)

Not what expected about installation (20.02.2018)

Does not fit as expected. Had to trim a lot and still does not fit well. There is a gap at the bottom. The holding screw only makes a hole on the frame. Bit disappointed indeed.

Les 7 flere anmeldelser fra brownells.com

Logg inn

Glemt passord?
Registrere

CONNECT

NETTSTEDSKART

PRODUKTKATEGORIER

BESTILLING

KUNDE SERVICE

Velkommen!

Velkommen til Brownells.no, Norges ledende leverandør av våpenrelaterte produkter, våpendeler, børsemakerverktøy, ladeverktøy, ladeutstyr og ladekomponenter!

Vårt kundeløfte:

Uansett om du bare liker å skyte, har våpen som hobby, er børsemaker og reparerer våpen daglig eller bare eier et våpen er dette siden for deg! I over 75 år har skyttere, profesjonelle børsemakere, hobby utøvere, militæret, politiet og våpenreparatører kommet til Brownells for å finne produkter og deler av høy kvalitet. Hos oss finner du over 40 000 produkter inkludert unike våpendeler, tilbehør, børsemakerverktøy, ladeverktøy, ladeutstyr, komponenter, ammunisjon og andre produkter for å vedlikeholde, reparere eller oppgradere dine våpen.