Din handlekurv er tom.

Handlekurv

37 17 00 00

Meld på nyhetsbrev

BROWNELLS
SPRING KITS FOR NEW MODEL RUGER® SINGLE ACTION REVOLVERS

050806101890 080665106

"Guaranteed Superior"

An excellent base from which to build a beautiful, smooth and reliably functioning gun. Includes a redesigned trigger spring and a reduced power hammer spring to give controlled trigger pull. Also includes extra power, base pin latch spring. Factory hammer spring is 23 lb. Kit includes (3) different, reduced power hammer springs; 17 , 18 & 19 lb. (Factory is 23 lb.), (1) 35% reduced power trigger spring, plus (1) extra power base pin latch spring. Springs fit the New Single Six®, New Blackhawk®, Super Blackhawk®, Maximum Blackhawk®, Bisley™, Vaquero® and Bisley Vaquero.

Mer...

"Garantert Overlegen"

En utmerket base for å bygge en vakker, jevn og pålitelig fungerende pistol. Inkluderer en omkonstruert avtrekkerfjær og en redusert kraft hammerfjær for å gi kontrollert avtrekk. Inkluderer også ekstra kraft, base pin låsefjær. Fabrikkens hammerfjær er 23 lb. Settet inkluderer (3) forskjellige, redusert kraft hammerfjærer; 17, 18 & 19 lb. (Fabrikken er 23 lb.), (1) 35% redusert kraft avtrekkerfjær, pluss (1) ekstra kraft base pin låsefjær. Fjærene passer til New Single Six®, New Blackhawk®, Super Blackhawk®, Maximum Blackhawk®, Bisley™, Vaquero® og Bisley Vaquero.

Mer...

Kundevurderinger for BROWNELLS RSA-106 PRO-SPRING KIT NEW MODEL RUGER SINGLE ACTION RVLVR

Antall vurderinger: 9
Fra brownells.com: 9
Gjennomsnittsvurdering: 4,7

Would buy again (31.12.2011)

Installed this in a Ruger Single Six, along with a 19# Hammer spring, What a difference it made. Trigger Pull was 4.5# and now is a clean 2# pull. No Stone work done on Hammer or sear.

Light and mushy... (13.11.2014)

Tried this spring on both a Blackhawk and a Single Six. It definitely lightened up the trigger pull, but at the expense of making it extremely mushy and vague feeling. On the Single Six it did not have enough weight to reset the trigger when you took your finger off. Guess I'll try the 40oz spring...

Excellent Springs (21.11.2009)

These springs were a cinch to install. They did the advertised job of helping reduce trigger pull (it was 5 1/2 lbs, orig equip, to between 2 1/2 to 3 lbs) and in conjunction with other action work, helped with the overall action smoothness.
Used on New Model (Early, Pre-Warning) Blackhawk 45LC.

Excellent springs (03.10.2013)

Trigger jobs on 3 Rugers. I blackhawk in 44 spl, 1 single six in 32 mag and 1 single six in 22...all had weight of pull from 4 to 5 lbs. All came out within a half ounce of 2 lbs...very consistant. Installs great! Did a 41 mag a year ago that also came out this close but I cant remember if it was one of these springs...I believe it was. Ordering more for upcoming jobs.

Rugers rule! (08.08.2016)

I have installed many of these 30 oz. springs for several of my best customers. They have all been very satisfied as am I. Thanks Wolff for all your great springs.

Excellent mod for your Vaquero (14.01.2011)

This kit did wonders for my NM Vaquero which is a year old now. Been fighting a really heavy (6lb) creepy trigger all year. Bought this kit because I figured [$] was worth the gamble -- GOOD gamble. You need to know how to disassemble the Vaquero but using the middle of the road hammer spring (18lb) and the reduced power trigger spring has made me love this gun now. Trigger pull is a manageable 3lbs and consistent on every squeeze. Trigger still has creep but for[$] as opposed to almost $300 for the complete Power Custom trigger and hammer set, I am extremely happy.

Nice Improvement (28.01.2011)

Just installed this kit myself on a Ruger Single Six and am very pleased with the result. I am not a gun smith and this was the first time I have done something like this.

I read the manual on disassemblying and assemblying the revolver but also found a video tutorial on www.wonderhowto.com where a Ruger Tech actually shows you how by taking the revolver apart and putting it back together.

The only difficult part for me was compressing the new hammer or main spring back onto hammer strut. There may be a trick but here's how I did it. It took me and my son (needed extra pair of hands). I ended up placing the strut in the vise and carefully pushing the spring down with main spring seat. Once it was compressed on the strut my son put a pin/nail in the hole on the bottom of the strut to keep the spring compressed until I could reinstall it in the revolver.

Overall it took about 30 minutes. About half the time was trying to get the new main spring compressed.

Just got back from the range and the gun works great.

Superb Spring Kit (31.08.2013)

My NM Blackhawk had a so-so factory trigger pull, so I ordered this spring kit. After opening the box from Brownells, I had the hammer and trigger springs installed within 20 minutes. (Hint: put the strut in a vice, place the hammer spring over it, then use the safety lock block to compress the spring)

The trigger pull is now unbelievably crisp and light!

great product (05.04.2015)

This is a great spring kit. I used the 18lb. hammer spring, it is so much better than the stock spring. Faster for cowboy action.

Les 9 flere anmeldelser fra brownells.com

549 549 1 NOK

Produktnr.: 080665106
BROWNELLS RSA-106 PRO-SPRING KIT NEW MODEL RUGER SINGLE ACTION RVLVR
Produsentnr.: 95305 050806101890 En utmerket base for å bygge en vakker, jevn og pålitelig fungerende pistol. Inkluderer en omkonstruert avtrekkerfjær og en redusert kraft hammerfjær for å gi kontrollert avtrekk. Inkluderer også ekstra kraft, base pin låsefjær. Fabrikkens hammerfjær er 23 lb. Settet inkluderer (3) forskjellige, redusert kraft hammerfjærer; 17, 18 & 19 lb. (Fabrikken er 23 lb.), (1) 35% redusert kraft avtrekkerfjær, pluss (1) ekstra kraft base pin låsefjær. Fjærene passer til New Single Six®, New Blackhawk®, Super Blackhawk®, Maximum Blackhawk®, Bisley™, Vaquero® og Bisley Vaquero.

549 NOK 41 kr 549,00 *

Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Inkluderer tre forskjellige hammerfjærer med redusert kraft (17, 18 og 19 lb) og en 35% redusert kraft avtrekkerfjær.
Kompatibel med flere Ruger® Single Action revolvermodeller som New Single Six®, New Blackhawk®, Super Blackhawk®, Maximum Blackhawk®, Bisley™, Vaquero® og Bisley Vaquero.
Ekstra kraft base pin låsefjær for forbedret pålitelighet og funksjonalitet.

Attributes

Leveringsvekt: 0,023kg Frakthøyde: 13mm Fraktbredde: 86mm Fraktlengde: 185mm

Elementdetaljer

Made in USA

Oppgrader din Ruger® revolver med Brownells SPRING KITS. Inkluderer omkonstruert avtrekkerfjær og redusert kraft hammerfjærer for bedre kontroll. 🚀 Lær mer nå!

"Guaranteed Superior"

Mer...

"Garantert Overlegen"

Mer...

Kundevurderinger for BROWNELLS RSA-106 PRO-SPRING KIT NEW MODEL RUGER SINGLE ACTION RVLVR

Antall vurderinger: 9
Fra brownells.com: 9
Gjennomsnittsvurdering: 4,7

Would buy again (31.12.2011)

Installed this in a Ruger Single Six, along with a 19# Hammer spring, What a difference it made. Trigger Pull was 4.5# and now is a clean 2# pull. No Stone work done on Hammer or sear.

Light and mushy... (13.11.2014)

Excellent Springs (21.11.2009)

Excellent springs (03.10.2013)

Rugers rule! (08.08.2016)

I have installed many of these 30 oz. springs for several of my best customers. They have all been very satisfied as am I. Thanks Wolff for all your great springs.

Excellent mod for your Vaquero (14.01.2011)

Nice Improvement (28.01.2011)

Superb Spring Kit (31.08.2013)

great product (05.04.2015)

This is a great spring kit. I used the 18lb. hammer spring, it is so much better than the stock spring. Faster for cowboy action.

Les 9 flere anmeldelser fra brownells.com

Kunder kjøpte også
Alternativer

WOLFF REDUCED POWER HAMMER SPRING PAK
NEW VAQUERO®/BLACKHAWK® REDUCED POWER HAMMER SPRINGS

WOLFF

På lager

kr 379,00 * kr 149,00 - kr 379,00*

Hovedfjærer

BROWNELLS 6.5MM "SPECIAL LINE" BRASS RIFLE BRUSH 3 PACK
"SPECIAL LINE"™ BRASS CORE BORE BRUSH

BROWNELLS

På lager

kr 279,00 * kr 239,00 - kr 799,00*

Løpsbørster

3,9

VOLQUARTSEN BLUE 10/22® BOLT RELEASE
RUGER® 10/22® BOLT RELEASE

VOLQUARTSEN

På lager

kr 339,00 *

4,6

Beskytt ditt Ruger® 10/22® løp med Tactical Solutions gjengebeskytter. Laget av 416 rustfritt stål med 1/2-28 gjenger. Perfekt passform! 🔧✨ Lær mer.

TACTICAL SOLUTIONS, LLC THREAD PROTECTOR 1/2-28 BLUED
RUGER® 10/22® THREAD PROTECTOR 1/2-28

TACTICAL SOLUTIONS, LLC

På lager

kr 699,00 *

Gjengebeskytter

Oppgrader Ruger 10/22™ med Nodak Spud justerbart frontvisir! Perfekt for standard løp, med militærstil siktebilde og høydejustering. Lær mer nå! 🔫✨

NODAK SPUD LLC .538" ADJ FRONT SIGHT FOR RUGER 10/22 STD BARREL ALUM BLK
RUGER 10/22™ ADJUSTABLE FRONT SIGHT STANDARD BARREL

NODAK SPUD LLC

Ikke tilgjengelig

Frontsikter

4,5

Logg inn

Glemt passord?
Registrere

CONNECT

NETTSTEDSKART

PRODUKTKATEGORIER

BESTILLING

KUNDE SERVICE

Velkommen!

Velkommen til Brownells.no, Norges ledende leverandør av våpenrelaterte produkter, våpendeler, børsemakerverktøy, ladeverktøy, ladeutstyr og ladekomponenter!

Vårt kundeløfte:

Uansett om du bare liker å skyte, har våpen som hobby, er børsemaker og reparerer våpen daglig eller bare eier et våpen er dette siden for deg! I over 75 år har skyttere, profesjonelle børsemakere, hobby utøvere, militæret, politiet og våpenreparatører kommet til Brownells for å finne produkter og deler av høy kvalitet. Hos oss finner du over 40 000 produkter inkludert unike våpendeler, tilbehør, børsemakerverktøy, ladeverktøy, ladeutstyr, komponenter, ammunisjon og andre produkter for å vedlikeholde, reparere eller oppgradere dine våpen.