CNC-machined base spreads recoil to help keep scopes, even heavy ones, on the gun, and, precisely zeroed from shot to shot. Angled screw wedges against the receiver opening to provide another recoil lug to divert recoil away from the base and mounting screws. Tolerances for straightness and flatness are held within .002" to create a solid platform for your optics. Bedding-compound inletting on mount bottom helps you get a perfect, base-to-receiver fit. Self-centering Torx® screws help prevent slipping during use. Accepts Picatinny and Weaver-style rings.
SPECS: Steel, black-oxide finish. Length approximately equal to action length, 9/16" (14mm) high. Recoil lug screw is ¼"-28, mounting screws are 6-48.
Mer...
Ekstra "Kloss" Legger til Rekylmotstand
CNC-maskinert base fordeler rekyl for å hjelpe med å holde sikter, selv tunge, på våpenet, og nøyaktig nullstilt fra skudd til skudd. Vinklet skrue kiler seg mot mottakeråpningen for å gi en ekstra rekylkloss som avleder rekyl bort fra basen og monteringsskruene. Toleranser for retthet og flatthet holdes innenfor .002" for å skape en solid plattform for optikken din. Innløp for beddingkomponent på bunnen av monteringen hjelper deg med å få en perfekt, base-til-mottaker passform. Selvsentrerende Torx®-skruer hjelper med å forhindre glidning under bruk. Aksepterer Picatinny- og Weaver-stil ringer.
SPECS: Stål, sortoksidert finish. Lengden er omtrent lik handlingslengden, 9/16" (14mm) høy. Skruen for rekylklossen er ¼"-28, monteringsskruene er 6-48.
Mer...
Kundevurderinger for FARRELL INDUSTRIES REMINGTON 700 SHORT ACTION 0 MOA BASE
Antall vurderinger: 5
Fra brownells.com: 5
Gjennomsnittsvurdering: 5
Excellent Scope Rail(07.09.2012)
Perfect fit on Savage 10FCP-K. Very pleased with the mounting rail and hardware. The extra lug is not even mentioned in the instruction sheet so documentation needs work, Mr. Farrell. The finish is impeccable and the overall precision is impressive. I used Farrell steel rings, high version, which had more than enough clearance for a 50mm bell and probably should have used standard height rings. But oversized bolt handle on law enforcement model would be very close to standard mount, so probably a good decision. Very pleased.
Awesome Scope Base(24.02.2010)
Top-of-the-line scope rail without an outrageous price. This is a very sturdy mount comparable to, if not exceeding in quality, to more commonly known brands. The fit was superb, and although it probably did not require bedding, it is recommended. Built-in groove on the receiver/base contact points for bedding material is a huge plus. The adjustable recoil lug is another great feature. Easy to follow instructions makes installation a breeze. As always, make sure you buy "Made in the USA".
Excellent products [...](15.11.2010)
I use this product on my Savage model 10. It installed perfectly and has never let me down. You can pay more for a similar product, [...] Thank you for producing a wonderful product.
Great Product(25.02.2010)
I installed this mount on a Remington 700SS 5-R Milspec rifle (.308). Wasn't satisfied with the Weaver 2-piece mounts I started with. Installation required bedding of the mount to the action but it was an overnight process. Results were immediate. First trip to the range yielded groups that were only slightly larger than the bullet. After 300+ rounds the mount is as solid as when it was installed. Using Leupold QD Scope rings I saw no indication that I needed to lap them. They fit perfect and alignment was dead on. I would like for it to be a little longer with more room both front and rear so I could spread the scope rings more. Also need room for an anti-cant level and cosine indicator. Current length limits mounting locations for these accessories. Not a deal breaker, just nice to have.
I highly recommend this product. Great quality, great performance, reasonable price.
Superior product on all my Guns(13.05.2011)
I put these mounts on all my custom rifles and shotguns. Ken has made a few custom mounts for me in the past. If you follow the directions and bed to the receiver they are rock solid. The extra recoil screw takes all the recoil removing the stress from the 6-48tpi screws. I use his rings also in conjunction with the base.
Produktnr.: 100001367 FARRELL INDUSTRIES REMINGTON 700 SHORT ACTION 0 MOA BASE Produsentnr.: FGFREM700S10FGFREM700S10 CNC-maskinert base fordeler rekyl for å hjelpe med å holde sikter, selv tunge, på våpenet, og nøyaktig nullstilt fra skudd til skudd. Vinklet skrue kiler seg mot mottakeråpningen for å gi en ekstra rekylkloss som avleder rekyl bort fra basen og monteringsskruene. Toleranser for retthet og flatthet holdes innenfor .002" for å skape en solid plattform for optikken din. Innløp for beddingkomponent på bunnen av monteringen hjelper deg med å få en perfekt, base-til-mottaker passform. Selvsentrerende Torx®-skruer hjelper med å forhindre glidning under bruk. Aksepterer Picatinny- og Weaver-stil ringer.
CNC-maskinert base som fordeler rekyl og holder sikter nøyaktig nullstilt fra skudd til skudd.
Aksepterer Picatinny- og Weaver-stil ringer, og inkluderer selvsentrerende Torx®-skruer for å forhindre glidning.
Stål med sortoksidert finish, designet for Remington 700 Short Action med 0 MOA base.
Attributes
Action Type:
Short
Elevation:
0 MOA
Farge:
Matte Black
Finish:
Black
Make:
Remington
Material:
Steel
Modell:
700
Number of Bases:
1-Piece
Style:
Tactical Bases
Leveringsvekt: 0,204kgFrakthøyde: 33mmFraktbredde: 33mmFraktlengde: 180mm
Elementdetaljer
Made in USA
Sikre presisjon med FG-FORCE Scope Mount fra Farrell Industries for Remington 700 Short Action. CNC-maskinert for optimal ytelse. Lær mer og få din nå! 🔫🔧
CNC-machined base spreads recoil to help keep scopes, even heavy ones, on the gun, and, precisely zeroed from shot to shot. Angled screw wedges against the receiver opening to provide another recoil lug to divert recoil away from the base and mounting screws. Tolerances for straightness and flatness are held within .002" to create a solid platform for your optics. Bedding-compound inletting on mount bottom helps you get a perfect, base-to-receiver fit. Self-centering Torx® screws help prevent slipping during use. Accepts Picatinny and Weaver-style rings.
SPECS: Steel, black-oxide finish. Length approximately equal to action length, 9/16" (14mm) high. Recoil lug screw is ¼"-28, mounting screws are 6-48.
Mer...
Ekstra "Kloss" Legger til Rekylmotstand
CNC-maskinert base fordeler rekyl for å hjelpe med å holde sikter, selv tunge, på våpenet, og nøyaktig nullstilt fra skudd til skudd. Vinklet skrue kiler seg mot mottakeråpningen for å gi en ekstra rekylkloss som avleder rekyl bort fra basen og monteringsskruene. Toleranser for retthet og flatthet holdes innenfor .002" for å skape en solid plattform for optikken din. Innløp for beddingkomponent på bunnen av monteringen hjelper deg med å få en perfekt, base-til-mottaker passform. Selvsentrerende Torx®-skruer hjelper med å forhindre glidning under bruk. Aksepterer Picatinny- og Weaver-stil ringer.
SPECS: Stål, sortoksidert finish. Lengden er omtrent lik handlingslengden, 9/16" (14mm) høy. Skruen for rekylklossen er ¼"-28, monteringsskruene er 6-48.
Mer...
Kundevurderinger for FARRELL INDUSTRIES REMINGTON 700 SHORT ACTION 0 MOA BASE
Antall vurderinger: 5
Fra brownells.com: 5
Gjennomsnittsvurdering: 5
Excellent Scope Rail(07.09.2012)
Perfect fit on Savage 10FCP-K. Very pleased with the mounting rail and hardware. The extra lug is not even mentioned in the instruction sheet so documentation needs work, Mr. Farrell. The finish is impeccable and the overall precision is impressive. I used Farrell steel rings, high version, which had more than enough clearance for a 50mm bell and probably should have used standard height rings. But oversized bolt handle on law enforcement model would be very close to standard mount, so probably a good decision. Very pleased.
Awesome Scope Base(24.02.2010)
Top-of-the-line scope rail without an outrageous price. This is a very sturdy mount comparable to, if not exceeding in quality, to more commonly known brands. The fit was superb, and although it probably did not require bedding, it is recommended. Built-in groove on the receiver/base contact points for bedding material is a huge plus. The adjustable recoil lug is another great feature. Easy to follow instructions makes installation a breeze. As always, make sure you buy "Made in the USA".
Excellent products [...](15.11.2010)
I use this product on my Savage model 10. It installed perfectly and has never let me down. You can pay more for a similar product, [...] Thank you for producing a wonderful product.
Great Product(25.02.2010)
I installed this mount on a Remington 700SS 5-R Milspec rifle (.308). Wasn't satisfied with the Weaver 2-piece mounts I started with. Installation required bedding of the mount to the action but it was an overnight process. Results were immediate. First trip to the range yielded groups that were only slightly larger than the bullet. After 300+ rounds the mount is as solid as when it was installed. Using Leupold QD Scope rings I saw no indication that I needed to lap them. They fit perfect and alignment was dead on. I would like for it to be a little longer with more room both front and rear so I could spread the scope rings more. Also need room for an anti-cant level and cosine indicator. Current length limits mounting locations for these accessories. Not a deal breaker, just nice to have.
I highly recommend this product. Great quality, great performance, reasonable price.
Superior product on all my Guns(13.05.2011)
I put these mounts on all my custom rifles and shotguns. Ken has made a few custom mounts for me in the past. If you follow the directions and bed to the receiver they are rock solid. The extra recoil screw takes all the recoil removing the stress from the 6-48tpi screws. I use his rings also in conjunction with the base.