Din handlekurv er tom.

Handlekurv

37 17 00 00

Meld på nyhetsbrev

TIMNEY
BROWNING A-BOLT TRIGGER SPRING KIT

081950006021 883000003

Reduces Pull Weight For Smoother Let Off

Two, reduced power springs let you lower the heavy, factory trigger to a comfortable two or three pounds. Gives a smooth, crisp feel that helps you get optimum accuracy. Easy installation requires no gunsmithing or modifications to rifle.

SPECS: Steel, pak of 2. Fits A-Bolt, Medallion and Micro-Medallion.

Mer...

Reduserer Avtrekksvekt For Glattere Avfyring

To fjærer med redusert styrke lar deg senke den tunge, fabrikkinnstilte avtrekkeren til en behagelig to eller tre pounds. Gir en jevn, skarp følelse som hjelper deg med å oppnå optimal presisjon. Enkel installasjon krever ingen børsemakerarbeid eller modifikasjoner på riflen.

SPECS: Stål, pakke med 2. Passer til A-Bolt, Medallion og Micro-Medallion.

Mer...

Kundevurderinger for TIMNEY A-BOLT TRIGGER SPRING KIT

Antall vurderinger: 9
Fra brownells.com: 9
Gjennomsnittsvurdering: 5

Great product for my Browning A-Bolts (04.01.2010)

I actually installed this myself!!! Yes, it is very simple with instructions. I have no trigger gauge BUT my A-Bolt and A-Bolt II now have lighter and smoother triggers with positive ignition. They both shoot great with the lighter 2lb springs. I sold the 3lbs springs on a gun forum as they were not needed and I preferred the lighter 2lb springs. I really don't think they make it a 2lb trigger pull. They are now comparable to other rifles I have that have had 3.5lb trigger jobs.

Spend the money! (02.11.2010)

I bought a rifle for my son for his birthday and evidently it had a trigger job. It was a Remington and the trigger was awesome. I compared the pull against my Browning and there was no comparison. I decided to buy the spring set for my Browning and it worked absolute wonders. Buy the springs and improve your accuracy!

Fixed the creep for me (03.08.2011)

My 1989 A bolt didn't really have a trigger weight problem. The problem was when I adjusted the trigger pull light, the trigger creeped a lot. I had to make it heavy to get rid of the creep. With the 3 pound spring, I can lighten it all the way and I don't feel creep.

Wow what a difference! (23.08.2012)

I have alway disliked the heavy trigger pull on my A-Bolt. I recently broke the trigger on it while hunting and found a replacement trigger @ Brownell's. While researching the trigger I ran across the Timney replacement springs. I ordered a new trigger and spring kit and installed them myself. The job took less than 15 minutes, was stupid easy, and saved me a lot of money!

Best Bang for my Buck! (20.12.2012)

I bought the way more expensive aftermarket trigger that is sold here by Brownells for my A-Bolt. I was not impressed, so I gave the Timney Spring Kit a shot. I will put this factory trigger up against any aftermarket trigger for this rifle. It was simple to install. After all the function tests, I put my digital trigger pull scale on it. The average for 10 results was 1 pound 13.5 ounces using the Light Spring during the install. Now if I can only find a spring kit for my BAR.

"Just what the doctor ordered" (06.03.2014)

I installed the lighter 2 lb. spring in my A-bolt Medallion, which was made in 1986, and it reduced the trigger pull from 4.8 lbs to 2.5 lbs. and the trigger breaks like glass. What more can I say. Truly a great product.

Timney A-Bolt Spring Kit (18.11.2014)

Great value for the price. I installed the springs in two different A-Bolts and all I can say is wow! You can't beat it... for under $30 you can turn two average triggers into two very impressive triggers. You will not be dissapointed with this purchase.

P.S.- While you doing this modification, take Ronsonol lighter fluid and flush everything else out. Makes a big difference as well!

A++SpringKit (01.04.2015)

Installed on 7-08. Trigger pull dropped from 3.5 to 1.5lbs.

Tested the safety - no issue - rock solid. Best upgrade for browning a-bolt rifle.

My groups tightened up from 3/4" to 3/8" by not dealing with a heavy trigger.

Easy install. It took more time to get the gun out of the safe than it took to install.

Great Improvement (23.09.2015)

I own an A-bolt 2 and I was not able to adjust the factory trigger as low as I would like it. It took less than 15 minutes to disassemble the rifle, install the spring, and reassemble the rifle. Easy upgrade, now the trigger pull is 2.1 pounds using the "light" spring.

Les 9 flere anmeldelser fra brownells.com

849 849 1 NOK

Produktnr.: 883000003
TIMNEY A-BOLT TRIGGER SPRING KIT
Produsentnr.: 602 081950006021 To fjærer med redusert styrke lar deg senke den tunge, fabrikkinnstilte avtrekkeren til en behagelig to eller tre pounds. Gir en jevn, skarp følelse som hjelper deg med å oppnå optimal presisjon. Enkel installasjon krever ingen børsemakerarbeid eller modifikasjoner på riflen.

849 NOK 13 kr 849,00 *

Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA

Spesifikasjoner: Make: Browning Modell: A-Bolt

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

To fjærer med redusert styrke lar deg senke avtrekkeren til en behagelig to eller tre pounds for optimal presisjon.
Enkel installasjon uten behov for børsemakerarbeid eller modifikasjoner på riflen.
Passer til A-Bolt, Medallion og Micro-Medallion modeller fra Browning.

Attributes

Make: Browning Modell: A-Bolt Leveringsvekt: 0,045kg Frakthøyde: 10mm Fraktbredde: 79mm Fraktlengde: 104mm

Elementdetaljer

Made in USA

Oppgrader din Browning A-Bolt med Timney A-Bolt Trigger Spring Kit. Reduser avtrekksvekten for optimal presisjon uten børsemakerarbeid. Enkel installasjon. 🔧✨

Reduces Pull Weight For Smoother Let Off

SPECS: Steel, pak of 2. Fits A-Bolt, Medallion and Micro-Medallion.

Mer...

Reduserer Avtrekksvekt For Glattere Avfyring

SPECS: Stål, pakke med 2. Passer til A-Bolt, Medallion og Micro-Medallion.

Mer...

Kundevurderinger for TIMNEY A-BOLT TRIGGER SPRING KIT

Antall vurderinger: 9
Fra brownells.com: 9
Gjennomsnittsvurdering: 5

Great product for my Browning A-Bolts (04.01.2010)

Spend the money! (02.11.2010)

Fixed the creep for me (03.08.2011)

Wow what a difference! (23.08.2012)

Best Bang for my Buck! (20.12.2012)

"Just what the doctor ordered" (06.03.2014)

Timney A-Bolt Spring Kit (18.11.2014)

A++SpringKit (01.04.2015)

Great Improvement (23.09.2015)

Les 9 flere anmeldelser fra brownells.com

Kunder kjøpte også

LEE PRECISION LEE LENGTH GAUGE/ SHELLHOLDER, .300 WSM
CASE LENGTH GAUGES

LEE PRECISION

På lager

kr 179,00 * kr 169,00 - kr 239,00*

Trimmer hylseholdere | Trimmer tilbehør

🔫 Magtech Rifle Primers Large - topp kvalitet i over 80 år! Perfekt for din rifle. Anerkjent internasjonalt. Kjøp nå og opplev forskjellen! 🌍

Magtech Rifle Primers Large
RIFLE PRIMERS

MAGTECH AMMUNITION

Ikke tilgjengelig

FORSTER PRODUCTS, INC. SHELL HOLDER ADAPTER PLATE FOR CO-AX PRESS
SHELL HOLDER ADAPTER PLATE FOR CO-AX PRESS

FORSTER PRODUCTS, INC.

På lager

kr 699,00 *

Hylseholdere og hylseplater

4,5

LEE PRECISION LEE CUTTER WITH BALL GRIP
CUTTER WITH BALL GRIP

LEE PRECISION

På lager

kr 239,00 *

Hylstrimmere

UNCLE MIKES UNCLE MIKE'S SLING SWIVELS 1-1/4
SUPER SWIVELS

UNCLE MIKES

På lager

kr 269,00 *

Reimfestesett

Logg inn

Glemt passord?
Registrere

CONNECT

NETTSTEDSKART

PRODUKTKATEGORIER

BESTILLING

KUNDE SERVICE

Velkommen!

Velkommen til Brownells.no, Norges ledende leverandør av våpenrelaterte produkter, våpendeler, børsemakerverktøy, ladeverktøy, ladeutstyr og ladekomponenter!

Vårt kundeløfte:

Uansett om du bare liker å skyte, har våpen som hobby, er børsemaker og reparerer våpen daglig eller bare eier et våpen er dette siden for deg! I over 75 år har skyttere, profesjonelle børsemakere, hobby utøvere, militæret, politiet og våpenreparatører kommet til Brownells for å finne produkter og deler av høy kvalitet. Hos oss finner du over 40 000 produkter inkludert unike våpendeler, tilbehør, børsemakerverktøy, ladeverktøy, ladeutstyr, komponenter, ammunisjon og andre produkter for å vedlikeholde, reparere eller oppgradere dine våpen.