Din handlekurv er tom.

Handlekurv

37 17 00 00

Meld på nyhetsbrev

DOUBLE STAR
AR-15/M16 CHARGING HANDLE

841348103851 100004996

Slick Teflon~ Finish For Ultra-Smooth Operation

Cycle loads with ease using this military-style charging handle assembly, complete and ready to drop-in any mil-spec upper receiver. Precision machined from rugged, yet lightweight 6061 T6 aluminum, then hardcoat anodized for a wear-resistant surface that adds strength. A final, Teflon® coating provides a slick, self-lubricating finish for exceptionally smooth operation.

SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 67⁄8" (17.5cm) long. Fits mil-spec AR-15/M16 upper receivers.

Mer...

Glatt Teflon~ Finish For Ultra-Myk Operasjon

Sykle ladninger med letthet ved hjelp av dette militærstil ladehåndtaket, komplett og klart til å settes inn i hvilken som helst mil-spec øvre mottaker. Presisjonsmaskinert fra robust, men lett 6061 T6 aluminium, deretter hardcoat anodisert for en slitasjebestandig overflate som legger til styrke. Et siste lag med Teflon®-belegg gir en glatt, selvsmørende finish for eksepsjonelt myk operasjon.

SPECS: 6061 T6 aluminium, hardcoat anodisert, matt svart. 67⁄8" (17.5cm) lang. Passer til mil-spec AR-15/M16 øvre mottakere.

Mer...

Kundevurderinger for DOUBLE STAR CHARGING HANDLE ASSEMBLY

Antall vurderinger: 12
Fra brownells.com: 12
Gjennomsnittsvurdering: 1,8

you get what you pay for (27.08.2010)

i bought this just so i could get my gun together and after charging the weapon about 50 times the metal wore down to the point where the charging handle was binding the good thing about it was the price thats about it

Good price (19.04.2011)

It does the job and for a great price

Nice charging handle (12.05.2011)

Fit is good. Love the Double Star logo. A great value.

Too flexible (18.10.2013)

This functions to charge a weapon, but will not last. It flexes a lot and the latch has a sharp point to it that has already worn a groove in the receiver after just a few uses. I will be returning this one.

low quality control (02.11.2013)

Out of 4 , 2 were normal and worked 2 needed modifications (fitment and filing messing up the black paint) to fit and work properly...

Not compatible (21.11.2013)

This item is profiled incorrectly to fit the notch in an Aero Precision upper receiver and as such, the latch's finger does not reach the recess in the upper receiver to retain it after charging. It requires much filing and that weakens the latch where there's not much metal to start with.

no problems (25.01.2014)

a little loose with bolt open in my colt AR but fits snug with charging handle in firing position, makes the weapon operate as it should with no issues

not so hot (01.12.2014)

This is made of 6061 aluminum, it sucks and is weak. I wish I had realized that when I ordered it. IT BINDS up the bolt carrier group, and it is already noticeably dented in the front lip (under the hole) AFTER ONLY 10 charges with my rifle.

Get one that is made of 7075 aluminum.

It came as part of a kit, but I'll try to return it.

Buyer Beware! (18.06.2016)

Not mil-spec material, seems to be aluminum as a steel bolt carrier destroys the charging handle. I normally would not give a 1 star review, but this CH simply does not even work. My experience was when charging the bolt, the flimsy CH was marred by the bolt carrier enough that the front lip slipped up and bound itself the top of the inside of the upper....keeping the bolt carrier from being able to be charged. My suggestion...don't skimp on an item that has to do with the functionality of the rifle. Buy the Vltor with enhanced latch for a little more money. You likely that you won't have to send this garbage back as I did.

[CAUTION] (01.09.2016)

Not mil-spec material, seems to be aluminum as a steel bolt carrier destroys the charging handle. My experience was when charging the bolt, the flimsy CH was marred by the bolt carrier enough that the front lip slipped up and bound itself the top of the inside of the upper....keeping the bolt carrier from being able to be charged. My suggestion...don't skimp on an item that has to do with the functionality of the rifle. Buy one with a bit higher grade metal; preferably steel.

Pure Junk (03.12.2016)

I installed this into my newly built AR 15 and it started jamming right away. This Handle almost jammed, so bad we could almost not even get the bolt back out of the Upper Receiver. I would stay have far away from this handle. Spend a little more and save our money and hands from getting pinched trying to get it to work right.

Binding up from the start (21.02.2017)

Bought this for a ground up build. Didn't do my homework and regretted it. From the start it was binding up. Swapped it out with a milspec unit and the problem disappeared.

Les 12 flere anmeldelser fra brownells.com

0 0 1 NOK

Produktnr.: 100004996
DOUBLE STAR CHARGING HANDLE ASSEMBLY
Produsentnr.: AR460 841348103851 Sykle ladninger med letthet ved hjelp av dette militærstil ladehåndtaket, komplett og klart til å settes inn i hvilken som helst mil-spec øvre mottaker. Presisjonsmaskinert fra robust, men lett 6061 T6 aluminium, deretter hardcoat anodisert for en slitasjebestandig overflate som legger til styrke. Et siste lag med Teflon®-belegg gir en glatt, selvsmørende finish for eksepsjonelt myk operasjon.

Varsle ved tilgjengelighet

Ikke tilgjengelig.

Spesifikasjoner: Finish: Matte Black Hand: Right Make: AR-15

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Presisjonsmaskinert fra 6061 T6 aluminium med hardcoat anodisert finish og Teflon®-belegg for glatt operasjon.
Kompatibel med mil-spec AR-15/M16 øvre mottakere, designet for enkel sykle ladning.
Produsert av DOUBLE STAR, tilgjengelig i matt svart utførelse og for høyrehendte brukere.

Attributes

Finish: Matte Black Hand: Right Make: AR-15 Leveringsvekt: 0,068kg Frakthøyde: 38mm Fraktbredde: 124mm Fraktlengde: 251mm

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.x

🚀 Oppgrader AR-15/M16 med Double Star Charging Handle! Presisjonsmaskinert 6061 T6 aluminium, hardcoat anodisert for holdbarhet. Klar til bruk. Lær mer nå!

Slick Teflon~ Finish For Ultra-Smooth Operation

SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 67⁄8" (17.5cm) long. Fits mil-spec AR-15/M16 upper receivers.

Mer...

Glatt Teflon~ Finish For Ultra-Myk Operasjon

SPECS: 6061 T6 aluminium, hardcoat anodisert, matt svart. 67⁄8" (17.5cm) lang. Passer til mil-spec AR-15/M16 øvre mottakere.

Mer...

Kundevurderinger for DOUBLE STAR CHARGING HANDLE ASSEMBLY

Antall vurderinger: 12
Fra brownells.com: 12
Gjennomsnittsvurdering: 1,8

you get what you pay for (27.08.2010)

Good price (19.04.2011)

It does the job and for a great price

Nice charging handle (12.05.2011)

Fit is good. Love the Double Star logo. A great value.

Too flexible (18.10.2013)

low quality control (02.11.2013)

Out of 4 , 2 were normal and worked 2 needed modifications (fitment and filing messing up the black paint) to fit and work properly...

Not compatible (21.11.2013)

no problems (25.01.2014)

a little loose with bolt open in my colt AR but fits snug with charging handle in firing position, makes the weapon operate as it should with no issues

not so hot (01.12.2014)

Buyer Beware! (18.06.2016)

[CAUTION] (01.09.2016)

Pure Junk (03.12.2016)

Binding up from the start (21.02.2017)

Bought this for a ground up build. Didn't do my homework and regretted it. From the start it was binding up. Swapped it out with a milspec unit and the problem disappeared.

Les 12 flere anmeldelser fra brownells.com

Kunder kjøpte også

BROWNELLS AR-15 STOCK ASSEMBLY COLLAPSIBLE MIL-SPEC BLACK
AR-15 STOCK ASSY COLLAPSIBLE MIL-SPEC

BROWNELLS

På lager

kr 1 499,00 *

Kolber

4,4

CMMG BRAVO SS .22LR CONVERSION KIT W/ 25RD MAGAZINE
AR-15/M16 22LR BRAVO CONVERSION KITS

CMMG

Ikke tilgjengelig

Bolt Carrier Groups

4,5

CMMG AR-15 MAGAZINE 22LR 25RD POLYMER BLACK
AR-15 25RD MAGAZINE 22LR

CMMG

På lager

kr 599,00 *

Magasiner | Magazines

LITTLE CROW GUNWORKS. 17 REMINGTON FIREBALL TRIM CHAMBER
WFT 2 TRIMMER

LITTLE CROW GUNWORKS.

På lager

kr 499,00 * kr 499,00 - kr 1 349,00*

Hylstrimmere

4,3

MTM CASE-GARD FLIP TOP PISTOL AMMO BOX 10MM-45ACP 100 ROUND RED
FLIP TOP PISTOL AMMO BOXES

MTM CASE-GARD

På lager

kr 159,00 * kr 149,00 - kr 259,00*

Ammunisjonsbokser

Logg inn

Glemt passord?
Registrere

CONNECT

NETTSTEDSKART

PRODUKTKATEGORIER

BESTILLING

KUNDE SERVICE

Velkommen!

Velkommen til Brownells.no, Norges ledende leverandør av våpenrelaterte produkter, våpendeler, børsemakerverktøy, ladeverktøy, ladeutstyr og ladekomponenter!

Vårt kundeløfte:

Uansett om du bare liker å skyte, har våpen som hobby, er børsemaker og reparerer våpen daglig eller bare eier et våpen er dette siden for deg! I over 75 år har skyttere, profesjonelle børsemakere, hobby utøvere, militæret, politiet og våpenreparatører kommet til Brownells for å finne produkter og deler av høy kvalitet. Hos oss finner du over 40 000 produkter inkludert unike våpendeler, tilbehør, børsemakerverktøy, ladeverktøy, ladeutstyr, komponenter, ammunisjon og andre produkter for å vedlikeholde, reparere eller oppgradere dine våpen.