Din handlekurv er tom.

Handlekurv

37 17 00 00

Meld på nyhetsbrev

EGW
1911 COMPETITION SEAR

841370100347 296100002

Ultra-Hard, Machined Tool Steel Sear For Long-Lasting Match-Quality Triggers

Ultra-hard sear gives a clean-breaking, light-feeling trigger pull with little or no time-consuming stoning—can be installed straight out of the package in many cases. Precision CNC-machined from tool steel barstock, then ground for precise geometry to ensure correct sear angle for full hammer/sear engagement. Hardened to Rc 55 for exceptionally long life, so your trigger job lasts longer.

SPECS: Machined tool steel, in-the-white. Fits 1911 Auto only.

Mer...

Ekstremt Hardt, Maskinert Verktøy Stål Sear For Langvarige Match-Kvalitets Avtrekkere

Ekstremt hard sear gir en ren og lett følelse av avtrekkeren med lite eller ingen tidkrevende stening—kan ofte installeres rett fra pakken. Nøyaktig CNC-maskinert fra verktøy stål barstock, deretter slipt for presis geometri for å sikre riktig sear vinkel for full hammer/sear engasjement. Herdet til Rc 55 for eksepsjonelt lang levetid, slik at din avtrekker jobb varer lenger.

SPECS: Maskinert verktøy stål, umalt. Passer kun til 1911 Auto.

Mer...

Kundevurderinger for EGW 1911 AUTO SEAR

Antall vurderinger: 14
Fra brownells.com: 14
Gjennomsnittsvurdering: 5

Great Product (18.04.2011)

I installed an EGW sear in my 1911 Springfield Armory project gun and I couldn't be happier with the result. I bought the sear along with the Brownells sear jig and an extra-fine stone.
After stoning in the jig and cutting the relief angle, the sear installed in a snap, passed function testing, and fired 150 rounds...superb performance! Used with a Wilson ultra-light hammer with hooks @ 0.20.

EGW 1911 Auto Sear (11.08.2011)

EGW is the best 1911 sear you can use. Fully manufactured in house and hardened to a point that will outlast the gun itself, takes a honed edge and holds it. A must have in any 1911.

EGW Sear (12.10.2011)

The best sear to ever hit the market. As with all EGW products they do it right the first time and offer only one grade product at a very reasonable price. Not three sears and hammers like the big name smiths with economy, mid range and pre bullet proof or hard core as these are the best. Perfect hardness and hold an edge for the life of the gun and the next one to follow with 100000s rounds +. Can be used with no relief and short hooks or a relief angle and a well tuned matching EGW hammer for the best of the best combination.

Best sear on the market (26.01.2012)

I've used various sears, but this one is the best. It is not the lightest, but it is the hardest. This one will last forever. I recommend this sear for any trigger weight down to about 2 lbs., so this is the one for you probably 99% of the time.

Highly Advise, excellent sear! (24.05.2012)

Nice sear required very little stoning to get it into shape. Thumb safety operation ok after installing this sear into pistol.

This product delivers. (16.08.2012)

I bought this sear based on the feedback I read. Everything was true. This is a quality part. Perfect dimensions, The breakaway angle is already cut, the contact face is polished and super hard. I matched this up with my favorite hammer, Wilson's Ultra Light Match Hammer at 20/1000ths. I easily got a safe, 2 1/2 lb. trigger on my Springfield TRP. Impressive product from EGW.

Excellent Sear (13.04.2013)

Replaced my factory Colt XSE with this sear and the results are amazing. This sear came polished with the correct angles and NO work to be done. My trigger pull fell to 3.5 lbs. In addition you get the very hard steel that will last many years and not lose its sear angles.
Thumb safety fit back in perfect with no adjustment needed.
Great Sear, I highly recommend it!

Nothing better... (16.06.2013)

Title says it all. Perfect consistency in finish and dimension means I can count on the EGW sear to fit exactly how I expect it to, without even having it in my hands. More than long enough to use with a TR sear jig if you choose.
Had the hardness independently checked... and it's spot on. I keep 3-4 on hand at all times... and if I measured the nose length on all 4, I doubt they'd be more than .0002" of each other in variance. Iv'e actually been using these for over 15 years, just got around to reviewing. Perfect compliment to the ball head disco.

This is THE ONE !! (25.01.2014)

IF you have no apptitude for polishing sear angles (like me)this sear is as good as it gets. I tried using an STI but the safety pad was WAY too big and I got sear bounce. The EGW dropped right in and coupled with a Colt sear spring got me a clean 3lb trigger on my SA Loaded.Best 1911 part I've ever bought,period.

The Industry's Finest Sear! (10.07.2015)

My business specializes in repair, customization and custom builds of 1911s. The geometry, fit and function of this Sear is superior to all others on the market, and I've tried them all! As stated earlier in another write up, best results will be obtained with mating to either an EGW Hammer, or to another parts manufacturer's 1911 Hammer, which uses the same dimensional geometry as EGW's (Hint: Their name begins with the letter "A"). The EGW Sear's heat treating and finish is without peer!! An extraordinary value!!

Quality sear (04.08.2015)

The stock trigger pull on my Ruger CMD was about 5.5lbs with some creep and grittiness. The EGW sear dropped in with no fitting and combined with a 19lb mainspring and a Colt sear spring I have a clean break with zero creep and its much lighter. I'm buying another to install in my Springfield.

Drop in, no smithing, much smoother pull (19.11.2015)

Remington 1911 R1. Stock trigger had a rough pull. Before buying the full trigger job kit, I wanted to try a simpler solution. The EGW sear dropped right in and made a major improvement. Zero smithing required.

On a side note, I also tried installing the series 80 to 70 conversion. That didn't do it, but the new sear did.

EGW they mean what they say (13.08.2017)

I look at what's out there and with out mentioning any names its not so much the product as the customer service, and I understand that people are very busy in their smithing and machining work that there is little time for chet chat but when I ever needed advice on a product or have a problem and leave a message they always come back with an answer ready to help, yup EGW they get the job done, thanks EGW.

Very nice 1911 sear (26.08.2018)

This is a very nice and tough sear. Out of the bag, it requires virtually zero stoning, or other fitting. I've used this in a re-build, with new trigger, disconnect, hammer and sear spring, and it really makes the trigger just right. No slop, no creep, nice clean break. Hope that info helps!

Les 14 flere anmeldelser fra brownells.com

649 649 1 NOK

Produktnr.: 296100002
EGW 1911 AUTO SEAR
Produsentnr.: 10040 841370100347 Ekstremt hard sear gir en ren og lett følelse av avtrekkeren med lite eller ingen tidkrevende stening—kan ofte installeres rett fra pakken. Nøyaktig CNC-maskinert fra verktøy stål barstock, deretter slipt for presis geometri for å sikre riktig sear vinkel for full hammer/sear engasjement. Herdet til Rc 55 for eksepsjonelt lang levetid, slik at din avtrekker jobb varer lenger.

649 NOK 86 kr 649,00 *

Leveringstid ca. 2-4 dager.
1 stk. i det lokale lageret
Mer enn 10 stk. på lager i USA

Spesifikasjoner: Make: 1911 Modell: Government, Commander, Officers

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Ekstremt hard sear gir en ren og lett følelse av avtrekkeren med lite eller ingen tidkrevende stening.
Nøyaktig CNC-maskinert fra verktøy stål barstock, herdet til Rc 55 for eksepsjonelt lang levetid.
Passer kun til 1911 Auto-modeller: Government, Commander, Officers.

Attributes

Make: 1911 Modell: Commander,Government,Officers Leveringsvekt: 0,005kg Frakthøyde: 8mm Fraktbredde: 76mm Fraktlengde: 124mm

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.c

Oppgrader din 1911 med EGW 1911 Competition Sear! Ekstremt hard og presis, gir en ren avtrekkerfølelse. Enkel installasjon. Gjør din avtrekker jobb langvarig! 🔧✨

Ultra-Hard, Machined Tool Steel Sear For Long-Lasting Match-Quality Triggers

SPECS: Machined tool steel, in-the-white. Fits 1911 Auto only.

Mer...

Ekstremt Hardt, Maskinert Verktøy Stål Sear For Langvarige Match-Kvalitets Avtrekkere

SPECS: Maskinert verktøy stål, umalt. Passer kun til 1911 Auto.

Mer...

Kundevurderinger for EGW 1911 AUTO SEAR

Antall vurderinger: 14
Fra brownells.com: 14
Gjennomsnittsvurdering: 5

Great Product (18.04.2011)

EGW 1911 Auto Sear (11.08.2011)

EGW is the best 1911 sear you can use. Fully manufactured in house and hardened to a point that will outlast the gun itself, takes a honed edge and holds it. A must have in any 1911.

EGW Sear (12.10.2011)

Best sear on the market (26.01.2012)

Highly Advise, excellent sear! (24.05.2012)

Nice sear required very little stoning to get it into shape. Thumb safety operation ok after installing this sear into pistol.

This product delivers. (16.08.2012)

Excellent Sear (13.04.2013)

Nothing better... (16.06.2013)

This is THE ONE !! (25.01.2014)

The Industry's Finest Sear! (10.07.2015)

Quality sear (04.08.2015)

Drop in, no smithing, much smoother pull (19.11.2015)

EGW they mean what they say (13.08.2017)

Very nice 1911 sear (26.08.2018)

Les 14 flere anmeldelser fra brownells.com

Kunder kjøpte også
Alternativer

WOLFF 8 LB. SPRING
TYPE A RECOIL SPRING FOR TARGET (SOFTBALL) LOADS

WOLFF

Kommer til lager

kr 349,00 * kr 229,00 - kr 749,00*

Rekylfjærer

11 LB. WOLFF VARIABLE POWER SPRING FOR GOVT. MODEL
GOVERNMENT MODEL VARIABLE POWER RECOIL SPRING

WOLFF

Kommer til lager

kr 359,00 * kr 339,00 - kr 1 099,00*

Rekylfjærer

WOLFF 1911 SEAR SPRING, SINGLE
1911 SEAR SPRING

WOLFF

På lager

kr 369,00 * kr 369,00 - kr 1 349,00*

Sear fjærer

4,8

Oppgrader din 1911 med STI Squared Tool Steel Hammer! 🛠️ Perfekt for konkurranse og selvforsvar. Polert og klar til installasjon. Lær mer nå!

STI SQUARED TOOL STEEL HAMMER
1911 HAMMER

STI

Ikke tilgjengelig

Haner

3,8

STARRETT #565B 3/32" PIN PUNCH
#565 PIN PUNCH SET

STARRETT

Kommer til lager

kr 299,00 * kr 259,00 - kr 1 799,00*

Puncher

4,4

Logg inn

Glemt passord?
Registrere

CONNECT

NETTSTEDSKART

PRODUKTKATEGORIER

BESTILLING

KUNDE SERVICE

Velkommen!

Velkommen til Brownells.no, Norges ledende leverandør av våpenrelaterte produkter, våpendeler, børsemakerverktøy, ladeverktøy, ladeutstyr og ladekomponenter!

Vårt kundeløfte:

Uansett om du bare liker å skyte, har våpen som hobby, er børsemaker og reparerer våpen daglig eller bare eier et våpen er dette siden for deg! I over 75 år har skyttere, profesjonelle børsemakere, hobby utøvere, militæret, politiet og våpenreparatører kommet til Brownells for å finne produkter og deler av høy kvalitet. Hos oss finner du over 40 000 produkter inkludert unike våpendeler, tilbehør, børsemakerverktøy, ladeverktøy, ladeutstyr, komponenter, ammunisjon og andre produkter for å vedlikeholde, reparere eller oppgradere dine våpen.