Din handlekurv er tom.

Handlekurv

37 17 00 00

Meld på nyhetsbrev

BROWNELLS
SHOTGUN ANTI-WALK TRIGGER HOUSING PIN

078000051

Prevents Pin & Housing Movement For Repeatable Trigger Performance

Eliminates pin drift in the receiver holes so your trigger housing stays in the same place for every shot. Slotted, truss head screws at each end of pin keeps trigger housing properly aligned and free of wobble. Helps deliver reliable trigger performance in tactical and competition guns. Remington includes both front and rear, anti-walk trigger pins.

SPECS: Steel, blued finish. Mossberg - Fits Mossberg 500/590. Winchester - Fits Winchester 1200/1300/1400. Benelli - Fits Benelli Super 90, Winchester Super X and Browning Gold.

Mer...

Forhindrer bevegelse av pinne og hus for gjentakbar avtrekkerytelse

Eliminerer pinneforskyvning i mottakerhullene slik at avtrekkerhuset ditt blir værende på samme sted for hvert skudd. Sporhodet skruer på hver ende av pinnen holder avtrekkerhuset riktig justert og fri for slingring. Bidrar til å levere pålitelig avtrekkerytelse i taktiske våpen og konkurransevåpen. Remington inkluderer både foran og bak, anti-walk avtrekkerpinner.

SPECS: Stål, blånet finish. Mossberg - Passer til Mossberg 500/590. Winchester - Passer til Winchester 1200/1300/1400. Benelli - Passer til Benelli Super 90, Winchester Super X og Browning Gold.

Mer...

Kundevurderinger for BROWNELLS BENELLI ANTI-WALK TRIGGER HOUSING PIN

Antall vurderinger: 11
Fra brownells.com: 11
Gjennomsnittsvurdering: 2,8

Decent little upgrade (14.02.2014)

I used the Benelli version of this pin in an American Tactical Imports TAC-SX2 shotgun. It fits it perfectly. It came a little dirty, so I used some CLP to clean it up. 4 stars instead of 5 because the included slot head screws are trash. Brownells should consider including some better quality Torx or socket head screws with these instead. It's threaded for 6-32 screws, in case you want to change them out.

Not worth it (04.03.2013)

Requires quite a bit of material to be removed from the ends of the pin, screw then removing a bunch of material from the screw threads so it'll screw down flush, took me about an hour with a grinder and it's a cut and try kinda proposition. Due to the trigger pin being for the most part retained by the trigger housing it's just not worth it.

Buyer Beware (20.03.2011)

I purchased the anti-walk pin for a Mossberg 500 AT. When I recieved the item it was missing the screws that come with it. A call to customer service and I had replacements in the mail. When I installed the pin it was too long. Even though I have tightened the screws as tight as they go the pin is loose in the reciever. *I would Loc-Tite to prevent the screws working loose.

No screws both times I purchased one (06.06.2011)

I have purchased two of these. Both came without screws. Very disappointed. Not the first time Brownells brand products have been either completely wrong or with things missing.

Good Idea, Poor or NO Qualiaty Control (04.09.2011)

Great product when made correctly. Screws do not fit flush and will snag on everything including your hands. Brownells has been made aware of this problem and fails to correct.

DIY Project (06.04.2012)

I give this product 3 stars not as a trigger housing pin but as a DIY project. The pin is the perfect length but either the screws are too long or the holes in the pin aren't tapped deep enough. It took almost no time to to grind off the screws about 0.1" so they could sit up against the receiver. I think the manufacturer could have done this but if you look at it as a DIY project you won't get too annoyed.

Love this enhancement (01.06.2013)

Mossberg should have made this a factory item. The 500 has a reputation for losing the trigger housing pin. Sure enough, last December squirrel hunting I found the trigger group on the ground with no pin in sight.

Since I had bought the gun the previous May, it was still in warranty. I called Mossberg, and the young lady promised I'd have a replacement pin in the mail. No such thing.

Actually, I'm glad now, because this Brownells pin is a great enhancement. I won't have to worry about the elusive Mossberg pin any more because I KNOW where the Brownells pin is.

The only unusual thing about this pin is the screws need shortening to get it absolutely tight. I don't mind it not being that tight, so I haven't bothered shortening it. I may later.

Perfect for 590 (25.10.2014)

Fit perfectly without modification. Trigger assembly will not ever fall out again. Any fitment issues must have been addressed by Brownells after earlier reviews. Screw heads are flush against receiver, and do not snag clothing, etc. Very happy 590. Added the metal trigger assembly, and fresh magazine spring for completeness.

Perfect fit and function (22.07.2009)

I use these in all shotguns I build or modify for customers.
A big improvement over the factory pins. No movement with high round counts. Withstands recoil to keep your trigger group in the same place shot after shot.
Button head allen screws would not only look much better but minimize risk with slotted screw drivers.

Good idea (05.08.2011)

These pins require slotted screwdrivers and as said in the other review Allen screws would be preferable. While installing the pins on a bench with a gun vise my screw driver slipped and and took a small piece out of the side of the screw head. Making it hard to finish the install. I have a picatinny rail mount that uses the same holes as these pins (the bolts supplied with it are allen head). I decided to reinstall the rail and try to get my money back. I will purchase these again if they are modified to allen heads.

Guarantee "Peace of mind" (30.09.2012)

Does exactly what it describes. Replaces trigger pins with these anti-walk trigger pins. So now when stumbling around in the bush one will not lose a pin.

I've upgraded every Remington 870, Mossberg 500 & 835 I've ever owned with the appropriate trigger pins.

Les 11 flere anmeldelser fra brownells.com

0 0 4 NOK

Produktnr.: 078000051
BROWNELLS BENELLI ANTI-WALK TRIGGER HOUSING PIN Eliminerer pinneforskyvning i mottakerhullene slik at avtrekkerhuset ditt blir værende på samme sted for hvert skudd. Sporhodet skruer på hver ende av pinnen holder avtrekkerhuset riktig justert og fri for slingring. Bidrar til å levere pålitelig avtrekkerytelse i taktiske våpen og konkurransevåpen. Remington inkluderer både foran og bak, anti-walk avtrekkerpinner.

Varsle ved tilgjengelighet

Ikke tilgjengelig.

Spesifikasjoner: Make: Browning Modell: Gold 12, Gold 20

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Attributes

Make: Browning Modell: Gold 12,Gold 20 Leveringsvekt: 0,005kg Fraktbredde: 83mm Fraktlengde: 146mm

Elementdetaljer

Made in USA

Produktnr.: 078000049
BROWNELLS MOSSBERG ANTI-WALK TRIGGER HOUSING PIN Eliminerer pinneforskyvning i mottakerhullene slik at avtrekkerhuset ditt blir værende på samme sted for hvert skudd. Sporhodet skruer på hver ende av pinnen holder avtrekkerhuset riktig justert og fri for slingring. Bidrar til å levere pålitelig avtrekkerytelse i taktiske våpen og konkurransevåpen. Remington inkluderer både foran og bak, anti-walk avtrekkerpinner.

Varsle ved tilgjengelighet

Ikke tilgjengelig.

Spesifikasjoner: Make: Mossberg Modell: 500

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Produktnr.: 078000050
BROWNELLS WINCHESTER ANTI-WALK TRIGGER HOUSING PIN Eliminerer pinneforskyvning i mottakerhullene slik at avtrekkerhuset ditt blir værende på samme sted for hvert skudd. Sporhodet skruer på hver ende av pinnen holder avtrekkerhuset riktig justert og fri for slingring. Bidrar til å levere pålitelig avtrekkerytelse i taktiske våpen og konkurransevåpen. Remington inkluderer både foran og bak, anti-walk avtrekkerpinner.

Varsle ved tilgjengelighet

Ikke tilgjengelig.

Spesifikasjoner: Make: Winchester Modell: 1300

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Produktnr.: 078000057
BROWNELLS ANTI-WALK TRIGGER HOUSING PIN REPLACEMENT SCREWS PAIR Eliminerer pinneforskyvning i mottakerhullene slik at avtrekkerhuset ditt blir værende på samme sted for hvert skudd. Sporhodet skruer på hver ende av pinnen holder avtrekkerhuset riktig justert og fri for slingring. Bidrar til å levere pålitelig avtrekkerytelse i taktiske våpen og konkurransevåpen. Remington inkluderer både foran og bak, anti-walk avtrekkerpinner.

Varsle ved tilgjengelighet

Ikke tilgjengelig.

Spesifikasjoner: Make: Remington Modell: 870

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Prevents Pin & Housing Movement For Repeatable Trigger Performance

SPECS: Steel, blued finish. Mossberg - Fits Mossberg 500/590. Winchester - Fits Winchester 1200/1300/1400. Benelli - Fits Benelli Super 90, Winchester Super X and Browning Gold.

Mer...

Forhindrer bevegelse av pinne og hus for gjentakbar avtrekkerytelse

Mer...

Kundevurderinger for BROWNELLS BENELLI ANTI-WALK TRIGGER HOUSING PIN

Antall vurderinger: 11
Fra brownells.com: 11
Gjennomsnittsvurdering: 2,8

Decent little upgrade (14.02.2014)

Not worth it (04.03.2013)

Buyer Beware (20.03.2011)

No screws both times I purchased one (06.06.2011)

I have purchased two of these. Both came without screws. Very disappointed. Not the first time Brownells brand products have been either completely wrong or with things missing.

Good Idea, Poor or NO Qualiaty Control (04.09.2011)

Great product when made correctly. Screws do not fit flush and will snag on everything including your hands. Brownells has been made aware of this problem and fails to correct.

DIY Project (06.04.2012)

Love this enhancement (01.06.2013)

Perfect for 590 (25.10.2014)

Perfect fit and function (22.07.2009)

Good idea (05.08.2011)

Guarantee "Peace of mind" (30.09.2012)

Les 11 flere anmeldelser fra brownells.com

Kunder kjøpte også

PHOENIX TECHNOLOGY 12 GAUGE FOREND MOSSBERG 500, 590, & 835
UNIVERSAL SHOTGUN FOREND

PHOENIX TECHNOLOGY

På lager

kr 359,00 * kr 359,00 - kr 389,00*

Fortre

2,3

UNCLE MIKES IR REM. 870
MAGAZINE CAP SWIVEL SETS

UNCLE MIKES

På lager

kr 439,00 *

Reimbøylesett for hagle

2,5

BROWNELLS .060" (1.5MM) REPLACEMENT ROD, GREEN
FIBER OPTIC REPLACEMENT RODS

BROWNELLS

På lager

kr 189,00 * kr 149,00 - kr 189,00*

Replacement Sight Inserts

BROWNELLS AR-15 STOCK ASSEMBLY COLLAPSIBLE MIL-SPEC BLACK
AR-15 STOCK ASSY COLLAPSIBLE MIL-SPEC

BROWNELLS

På lager

kr 1 449,00 *

Kolber

4,4

AIMTECH REMINGTON 1100/11-87 12GA SCOPE MOUNT
SHOTGUN SCOPE MOUNT

AIMTECH

Kommer til lager

kr 899,00 * kr 849,00 - kr 1 399,00*

Baser til hagler

Logg inn

Glemt passord?
Registrere

CONNECT

NETTSTEDSKART

PRODUKTKATEGORIER

BESTILLING

KUNDE SERVICE

Velkommen!

Velkommen til Brownells.no, Norges ledende leverandør av våpenrelaterte produkter, våpendeler, børsemakerverktøy, ladeverktøy, ladeutstyr og ladekomponenter!

Vårt kundeløfte:

Uansett om du bare liker å skyte, har våpen som hobby, er børsemaker og reparerer våpen daglig eller bare eier et våpen er dette siden for deg! I over 75 år har skyttere, profesjonelle børsemakere, hobby utøvere, militæret, politiet og våpenreparatører kommet til Brownells for å finne produkter og deler av høy kvalitet. Hos oss finner du over 40 000 produkter inkludert unike våpendeler, tilbehør, børsemakerverktøy, ladeverktøy, ladeutstyr, komponenter, ammunisjon og andre produkter for å vedlikeholde, reparere eller oppgradere dine våpen.