Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

TPS PRODUCTS, LLC. XRT X-RINGS PICATINNY SCOPE RINGS


XRT Aluminum Rings 30mm Low

XRT Series X-Rings, bringing a whole new level of beauty and precision into an extremely rugged Picatinny platform scope mount. The X-Rings have been built from the bottom up to provide the extreme precision and accuracy that TPS rings have been known for over the last two decades. Mer...

Produktnr.: 100036961 071611505802 100036961
XRT Series X-Rings, bringing a whole new level of beauty and precision into an extremely rugged Picatinny platform scope mount. The X-Rings have been built from the bottom up to provide the extreme precision and accuracy that TPS rings have been known for over the last two decades.  The ring bases begin from a solid billet of 7075-T6 aluminum and then machined with our unique Double-Lug Picatinny recoil shoulders from the solid billet.  We have designed and engineered the Double-Lug recoil system to allow the parallelism and perpendicularity of the lugs to the ring bore to be within .0002, thereby providing repeatability that no other mount in the world with similar integrated lugs has done before. The X-Rings are specifically designed for the Mil-STD 1913 rail system.  Because of the Double-Lug system, they do require two (2) accompanied cross-slots in a 1913 cross-slot configuration. The ring caps are secured with Four (4) 8-32 x 1/2″ Camcar-Textron Torx drive screws and with the same unique design that allows you to tighten the left side of the cap, then the right side without the scope rotating.  The edges and corners are fully radiused, preventing snagging, and providing a beautiful appearance to your rifle. The rings are securely attached to your rail with an oversized clamp system using Two (2) 8-32 x 1/2″ Camcar-Textron Torx screws, preventing any chance your rings will loosen or move once installed. With unparalleled precision and holding force, and sleek design, these will meet the extreme expectations of any class shooter. SPECS: 7075-T651 Aluminum Alloy, matte black, hard anodized to Mil-A-8625 standards. .700″ (17.8mm) wide. Height measured from the top of base to center of the ring. 30mm – High: .1.075″ (31.11mm).
2507 3006 5 NOK
100036961
XRT Aluminum Rings 30mm Low
Produsentnr.: 50580 071611505802
2507 NOK 3 kr 2 507,00 *

3 på lager
Spesifikasjoner: Finish: Matte Blue Height: .925'' Material: Aluminum Scope Tube Diameter: 30mm Size: Low Style: Tactical Rings

Attributes

Finish: Matte Blue Height: .925'' Material: Aluminum Scope Tube Diameter: 30mm Size: Low Style: Tactical Rings

Elementdetaljer

Made in USA
ECCN: EAR99




100036963
XRT Aluminum Rings 30mm High
Produsentnr.: 50582 071611505826
2743 NOK 3 kr 2 743,00 *

3 på lager
Spesifikasjoner: Finish: Matte Blue Height: 1.225'' Material: Aluminum Scope Tube Diameter: 30mm Size: High Style: Tactical Rings
100036962
XRT Aluminum Rings 30mm Medium
Produsentnr.: 50581 071611505819
2507 NOK 3 kr 2 507,00 *

3 på lager
Spesifikasjoner: Finish: Matte Blue Height: 1.075'' Material: Aluminum Scope Tube Diameter: 30mm Size: Medium Style: Tactical Rings
100036960
XRT Aluminum Rings 30mm S-Low
Produsentnr.: 52580
2507 NOK 0 kr 2 507,00 *

Spesialbestilles: Beregn 5-8 ukers behandlingstid
Spesifikasjoner: Finish: Matte Blue Height: .820'' Material: Aluminum Scope Tube Diameter: 30mm Size: Super Low Style: Tactical Rings
100036964
XRT Aluminum Rings 30mm X-High
Produsentnr.: 50583 071611505833
3006 NOK 3 kr 3 006,00 *

3 på lager
Spesifikasjoner: Finish: Matte Blue Height: 1.4'' Material: Aluminum Scope Tube Diameter: 30mm Size: Extra High Style: Tactical Rings
XRT Series X-Rings, bringing a whole new level of beauty and precision into an extremely rugged Picatinny platform scope mount. The X-Rings have been built from the bottom up to provide the extreme precision and accuracy that TPS rings have been known for over the last two decades.  The ring bases begin from a solid billet of 7075-T6 aluminum and then machined with our unique Double-Lug Picatinny recoil shoulders from the solid billet.  We have designed and engineered the Double-Lug recoil system to allow the parallelism and perpendicularity of the lugs to the ring bore to be within .0002, thereby providing repeatability that no other mount in the world with similar integrated lugs has done before. The X-Rings are specifically designed for the Mil-STD 1913 rail system.  Because of the Double-Lug system, they do require two (2) accompanied cross-slots in a 1913 cross-slot configuration. The ring caps are secured with Four (4) 8-32 x 1/2″ Camcar-Textron Torx drive screws and with the same unique design that allows you to tighten the left side of the cap, then the right side without the scope rotating.  The edges and corners are fully radiused, preventing snagging, and providing a beautiful appearance to your rifle. The rings are securely attached to your rail with an oversized clamp system using Two (2) 8-32 x 1/2″ Camcar-Textron Torx screws, preventing any chance your rings will loosen or move once installed. With unparalleled precision and holding force, and sleek design, these will meet the extreme expectations of any class shooter. SPECS: 7075-T651 Aluminum Alloy, matte black, hard anodized to Mil-A-8625 standards. .700″ (17.8mm) wide. Height measured from the top of base to center of the ring. 30mm – High: .1.075″ (31.11mm).