Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge
071611505826 100036963
XRT Series X-Rings, bringing a whole new level of beauty and precision into an extremely rugged Picatinny platform scope mount. The X-Rings have been built from the bottom up to provide the extreme precision and accuracy that TPS rings have been known for over the last two decades.  The ring bases begin from a solid billet of 7075-T6 aluminum and then machined with our unique Double-Lug Picatinny recoil shoulders from the solid billet.  We have designed and engineered the Double-Lug recoil system to allow the parallelism and perpendicularity of the lugs to the ring bore to be within .0002, thereby providing repeatability that no other mount in the world with similar integrated lugs has done before. The X-Rings are specifically designed for the Mil-STD 1913 rail system.  Because of the Double-Lug system, they do require two (2) accompanied cross-slots in a 1913 cross-slot configuration. The ring caps are secured with Four (4) 8-32 x 1/2″ Camcar-Textron Torx drive screws and with the same unique design that allows you to tighten the left side of the cap, then the right side without the scope rotating.  The edges and corners are fully radiused, preventing snagging, and providing a beautiful appearance to your rifle. The rings are securely attached to your rail with an oversized clamp system using Two (2) 8-32 x 1/2″ Camcar-Textron Torx screws, preventing any chance your rings will loosen or move once installed. With unparalleled precision and holding force, and sleek design, these will meet the extreme expectations of any class shooter. SPECS: 7075-T651 Aluminum Alloy, matte black, hard anodized to Mil-A-8625 standards. .700″ (17.8mm) wide. Height measured from the top of base to center of the ring. 30mm – High: .1.075″ (31.11mm).
2899 2899 1 NOK
Produktnr.: 100036963
TPS PRODUCTS XRT ALUMINUM RINGS 30MM HIGH
Produsentnr.: 50582 071611505826 XRT-serien X-Rings gir en helt ny dimensjon av skjønnhet og presisjon til en ekstremt robust Picatinny-plattform kikkertmontasje. X-Rings er konstruert fra bunnen for å levere den ekstreme presisjonen og nøyaktigheten som TPS-ringer har vært kjent for i løpet av de siste to tiårene. Ringbasene starter fra en solid blokk av 7075-T6 aluminium og bearbeides deretter med vår unike Double-Lug Picatinny rekylskulder fra den solide blokken. Vi har designet og utviklet Double-Lug rekylsystemet for å tillate parallelitet og vinkelrettighet av lugene til ringboringen å være innenfor .0002, noe som gir repeterbarhet som ingen annen montering i verden med lignende integrerte luger har gjort før. X-Rings er spesielt designet for Mil-STD 1913-skinnen. På grunn av Double-Lug-systemet krever de to (2) ledsagende tverrslisser i en 1913 tverrsliss-konfigurasjon. Ringkapslene sikres med fire (4) 8-32 x 1/2″ Camcar-Textron Torx-driveskruer og med det samme unike designet som lar deg stramme venstre side av kapselen, deretter høyre side uten at kikkerten roterer. Kanter og hjørner er fullstendig avrundet, noe som forhindrer hekting og gir et vakkert utseende til riflen din. Ringene er sikkert festet til skinnen din med et overdimensjonert klemmesystem som bruker to (2) 8-32 x 1/2″ Camcar-Textron Torx-skruer, noe som forhindrer enhver sjanse for at ringene dine vil løsne eller flytte seg når de er installert. Med uovertruffen presisjon og holdekraft, samt et slankt design, vil disse møte de ekstreme forventningene til enhver klasse skytter. SPESIFIKASJONER: 7075-T651 aluminiumslegering, matt svart, hard anodisert etter Mil-A-8625-standarder. .700″ (17,8 mm) bred. Høyde målt fra toppen av basen til senter av ringen. 30mm – Høy: .1.075″ (31,11mm).
2899 NOK 1 kr 2 899,00 *
Leveringstid ca. 14-21 dager.
1 stk. på lageret i USA
Spesifikasjoner: Finish: Matte Blue Height: 1.225'' Material: Aluminum Scope Tube Diameter: 30mm Size: High Style: Tactical Rings

Attributes

Finish: Matte Blue Height: 1.225'' Material: Aluminum Scope Tube Diameter: 30mm Size: High Style: Tactical Rings Leveringsvekt: 0,181kg Frakthøyde: 64mm Fraktbredde: 64mm Fraktlengde: 127mm

Elementdetaljer

Made in USA




XRT Series X-Rings, bringing a whole new level of beauty and precision into an extremely rugged Picatinny platform scope mount. The X-Rings have been built from the bottom up to provide the extreme precision and accuracy that TPS rings have been known for over the last two decades.  The ring bases begin from a solid billet of 7075-T6 aluminum and then machined with our unique Double-Lug Picatinny recoil shoulders from the solid billet.  We have designed and engineered the Double-Lug recoil system to allow the parallelism and perpendicularity of the lugs to the ring bore to be within .0002, thereby providing repeatability that no other mount in the world with similar integrated lugs has done before. The X-Rings are specifically designed for the Mil-STD 1913 rail system.  Because of the Double-Lug system, they do require two (2) accompanied cross-slots in a 1913 cross-slot configuration. The ring caps are secured with Four (4) 8-32 x 1/2″ Camcar-Textron Torx drive screws and with the same unique design that allows you to tighten the left side of the cap, then the right side without the scope rotating.  The edges and corners are fully radiused, preventing snagging, and providing a beautiful appearance to your rifle. The rings are securely attached to your rail with an oversized clamp system using Two (2) 8-32 x 1/2″ Camcar-Textron Torx screws, preventing any chance your rings will loosen or move once installed. With unparalleled precision and holding force, and sleek design, these will meet the extreme expectations of any class shooter. SPECS: 7075-T651 Aluminum Alloy, matte black, hard anodized to Mil-A-8625 standards. .700″ (17.8mm) wide. Height measured from the top of base to center of the ring. 30mm – High: .1.075″ (31.11mm).
Nyhetsbrev