Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

EGW WEATHERBY MARK V TRR (6 LUG BOLT) HD SCOPE BASES


Weatherby Mark V TRR (6 Lug Bolt) HD Scope Base 0 MOA

Machined From: Solid 7075 T6 Aircraft Grade Aluminum Finish: Matte Black Only Compatible with Picatinny or Weaver scope rings. Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included Torque Specs: 20 in/lbs Center Spread: 4.280" Overall Length of Mount: 6.670" EGW's Weatherby Mark V TRR (Threat Response Rifle) mount is made specific to the gun and ONLY fits the 6 lug Weatherby MK V TRR. Mer...

Produktnr.: 296000602 296000602
Machined From: Solid 7075 T6 Aircraft Grade Aluminum Finish: Matte Black Only Compatible with Picatinny or Weaver scope rings. Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included Torque Specs: 20 in/lbs Center Spread: 4.280" Overall Length of Mount: 6.670" EGW's Weatherby Mark V TRR (Threat Response Rifle) mount is made specific to the gun and ONLY fits the 6 lug Weatherby MK V TRR. This mount comes with a bevel on both sides of the ejection port, making it ambidextrous. The middle spread is the distance between the two middle holes, center to center, on your receiver. The middle spread on our Weatherby Mark V TRR mount is 4.280". If this spread does not match, you may need our Standard Weatherby Mark V mount. The middle spread for our Standard Mark V mount is 4.485". Please see our separate listing for the Weatherby Mark V if you require the standard mount. All action lengths are available in 0 or 20 MOA. We recommend: 0 MOA - if shooting 0-500 yards 20 MOA - if shooting 500-1000 yards Custom silver anodizing is available upon request, for an additional charge of $15 (a lead time of approximately 3 months is also associated with this custom anodizing. Please call us if you are interested in placing a custom order). Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike. This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. Add EGW’s Practical or HD Scope Rings to make it a complete overhaul! We machine these in our shop using one of our USA-made Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
EGW
1124 1124 2 NOK
296000602
Weatherby Mark V TRR (6 Lug Bolt) HD Scope Base 0 MOA
Produsentnr.: 80710
1124 NOK 0 kr 1 124,00 *

Spesialbestilles: Beregn 5-8 ukers behandlingstid
Spesifikasjoner: Color: Matte Black Elevation: 0 MOA Make: Weatherby Material: Aluminum Model: Mark V Number of Bases: 1-Piece Style: Picatinny Rail

Attributes

Color: Matte Black Elevation: 0 MOA Make: Weatherby Material: Aluminum Model: Mark V Number of Bases: 1-Piece Style: Picatinny Rail

Elementdetaljer

Made in USA




296000603
Weatherby Mark V TRR (6 Lug Bolt) HD Scope Base 20 MOA
Produsentnr.: 80712
1124 NOK 0 kr 1 124,00 *

Spesialbestilles: Beregn 5-8 ukers behandlingstid
Spesifikasjoner: Color: Matte Black Elevation: 20 MOA Make: Weatherby Material: Aluminum Model: Mark V Number of Bases: 1-Piece Style: Picatinny Rail
Machined From: Solid 7075 T6 Aircraft Grade Aluminum Finish: Matte Black Only Compatible with Picatinny or Weaver scope rings. Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included Torque Specs: 20 in/lbs Center Spread: 4.280" Overall Length of Mount: 6.670" EGW's Weatherby Mark V TRR (Threat Response Rifle) mount is made specific to the gun and ONLY fits the 6 lug Weatherby MK V TRR. This mount comes with a bevel on both sides of the ejection port, making it ambidextrous. The middle spread is the distance between the two middle holes, center to center, on your receiver. The middle spread on our Weatherby Mark V TRR mount is 4.280". If this spread does not match, you may need our Standard Weatherby Mark V mount. The middle spread for our Standard Mark V mount is 4.485". Please see our separate listing for the Weatherby Mark V if you require the standard mount. All action lengths are available in 0 or 20 MOA. We recommend: 0 MOA - if shooting 0-500 yards 20 MOA - if shooting 500-1000 yards Custom silver anodizing is available upon request, for an additional charge of $15 (a lead time of approximately 3 months is also associated with this custom anodizing. Please call us if you are interested in placing a custom order). Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike. This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. Add EGW’s Practical or HD Scope Rings to make it a complete overhaul! We machine these in our shop using one of our USA-made Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).