Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge
713000083
Easily Removes Screw-In Extractor Rods Without Damage To Rod Or Cylinder Yoke
Easy to use tool enables fast removal and reinstallation of screw-in extractor rods from double action revolvers without damage to rod or cylinder yoke. Specifically designed for Smith & Wesson J/K/L/N frame models and Ruger® Security-Six® and Speed-Six®, but will work on almost any similar screw-in rod. Just slide the extractor rod into the correct-size grooves on the tool, close the tool halves around the rod by tightening the two hex head bolts on either side of the rod using the included Allen wrench, and simply unscrew the rod with the tool while holding the cylinder. Grooves are precision machined to provide complete, 100% contact with the rod. Tool body of 6061 T6 aluminum is strong enough to provide years of service, yet soft enough to aid in securely gripping polished steel extractor rod without slippage or marring of rod surface.
SPECS: Aluminum, anodized, natural silver finish. Steel bolts, black oxide finish. Fits Smith & Wesson J, K, L and N frame revolvers and clones, Ruger Security-Six/Speed-Six, and older revolvers with button heads on the extractor rod front. Includes hex wrench and instructions.
849 849 1 NOK
Produktnr.: 713000083
POWER CUSTOM UNIVERSAL EXTRACTOR ROD WRENCH
Produsentnr.: NONE Dette brukervennlige verktøyet muliggjør rask fjerning og reinstallasjon av skru-inn ekstraktorstenger fra dobbelthandlingsrevolvere uten å skade stangen eller sylinderbøylen. Spesielt designet for Smith & Wesson J/K/L/N ramme modeller og Ruger® Security-Six® og Speed-Six®, men vil fungere på nesten alle lignende skru-inn stenger. Bare skyv ekstraktorstangen inn i de korrekte størrelsesrillene på verktøyet, lukk verktøyhalvdelene rundt stangen ved å stramme de to sekskantbolter på hver side av stangen ved hjelp av den medfølgende unbrakonøkkelen, og skru enkelt stangen av med verktøyet mens du holder sylinderen. Rillene er presisjonsmaskinert for å gi fullstendig, 100% kontakt med stangen. Verktøykroppen av 6061 T6 aluminium er sterk nok til å gi mange års tjeneste, men er også myk nok til å hjelpe med å sikre grep på polert stål ekstraktorstang uten glidning eller skader på stangoverflaten.
849 NOK 1 kr 849,00 *
Leveringstid ca. 14-21 dager.
1 stk. på lageret i USA
Spesifikasjoner: Make: Universal Handguns

Attributes

Make: Universal Handguns Leveringsvekt: 0,136kg Frakthøyde: 20mm Fraktbredde: 108mm Fraktlengde: 208mm

Elementdetaljer

Made in USA




Easily Removes Screw-In Extractor Rods Without Damage To Rod Or Cylinder Yoke
Easy to use tool enables fast removal and reinstallation of screw-in extractor rods from double action revolvers without damage to rod or cylinder yoke. Specifically designed for Smith & Wesson J/K/L/N frame models and Ruger® Security-Six® and Speed-Six®, but will work on almost any similar screw-in rod. Just slide the extractor rod into the correct-size grooves on the tool, close the tool halves around the rod by tightening the two hex head bolts on either side of the rod using the included Allen wrench, and simply unscrew the rod with the tool while holding the cylinder. Grooves are precision machined to provide complete, 100% contact with the rod. Tool body of 6061 T6 aluminum is strong enough to provide years of service, yet soft enough to aid in securely gripping polished steel extractor rod without slippage or marring of rod surface.
SPECS: Aluminum, anodized, natural silver finish. Steel bolts, black oxide finish. Fits Smith & Wesson J, K, L and N frame revolvers and clones, Ruger Security-Six/Speed-Six, and older revolvers with button heads on the extractor rod front. Includes hex wrench and instructions.
Nyhetsbrev