Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

BROWNELLS
UNIVERSAL BUTT PLATE SMALL

080003975
Replaces Worn, Chipped, Broken Factory Buttplates; Preserves Original Appearance
Speed up the restoration of that classic shotgun or rifle by replacing a worn, chipped, or cracked buttplate with an affordable, grind-to-fit replacement of moldable polyurethane resin. Durable resin looks and feels like the hard rubber, Bakelite, or black plastic used for the original buttplates on many of these guns, and will not shrink, swell, or crack over time. Proprietary molding process uses the highest-quality molds engineered to prevent unsightly “flash” and air bubbles on the finished product. Grinds easily without flaking or fracturing. Includes fine-line, horizontal serrations often found on period buttplates, but without the tricky borders that make grinding the sides difficult. Heat briefly in boiling water or microwave to soften the resin so it can be molded to the contour of your stock; the shape sets up well once cooled and is extremely durable. Drilled and counterbored to accept two #12 buttplate screws, available separately.

SPECS: Molded polyurethane resin, black. Fitting required. Small - 4¾” (12.1cm) long, 1½” (3.8cm) wide. 2-15⁄16" (7.5cm) hole spacing.

399 399 1 NOK
Produktnr.: 080003975
BROWNELLS UNIVERSAL SMALL BUTT PLATE BLACK POLYMER
Produsentnr.: B331M Akselerer restaureringen av den klassiske haglen eller riflen ved å erstatte en slitt, avskallet eller sprukket skulderplate med et rimelig, tilpassbart erstatningsprodukt av formbar polyuretan resin. Holdbar resin ser ut og føles som hard gummi, Bakelite eller svart plast som ble brukt for de originale skulderplatene på mange av disse våpnene, og vil ikke krympe, svelle eller sprekke over tid. Eksklusiv støpeprosess bruker former av høyeste kvalitet designet for å forhindre stygg "flash" og luftbobler på det ferdige produktet. Slipes lett uten å flakke eller sprekke. Inkluderer fine, horisontale riller ofte funnet på skulderplater fra den tiden, men uten de kompliserte kantene som gjør sliping av sidene vanskelig. Varm kort i kokende vann eller mikrobølgeovn for å mykne resin slik at den kan formes etter konturen på kolben din; formen setter seg godt når den er avkjølt og er ekstremt holdbar. Boret og forsenket for å akseptere to #12 skulderplateskruer, tilgjengelig separat.
399 NOK 51 kr 399,00 *
Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA
Spesifikasjoner: Finish: Black Make: Universal Rifles, Universal Shotguns Material: Polymer Size: 4 3/4

Attributes

Finish: Black Make: Universal Rifles,Universal Shotguns Material: Polymer Size: 4 3/4 Leveringsvekt: 0,023kg Frakthøyde: 5mm Fraktbredde: 76mm Fraktlengde: 147mm

Elementdetaljer

Made in USA




Replaces Worn, Chipped, Broken Factory Buttplates; Preserves Original Appearance
Speed up the restoration of that classic shotgun or rifle by replacing a worn, chipped, or cracked buttplate with an affordable, grind-to-fit replacement of moldable polyurethane resin. Durable resin looks and feels like the hard rubber, Bakelite, or black plastic used for the original buttplates on many of these guns, and will not shrink, swell, or crack over time. Proprietary molding process uses the highest-quality molds engineered to prevent unsightly “flash” and air bubbles on the finished product. Grinds easily without flaking or fracturing. Includes fine-line, horizontal serrations often found on period buttplates, but without the tricky borders that make grinding the sides difficult. Heat briefly in boiling water or microwave to soften the resin so it can be molded to the contour of your stock; the shape sets up well once cooled and is extremely durable. Drilled and counterbored to accept two #12 buttplate screws, available separately.

SPECS: Molded polyurethane resin, black. Fitting required. Small - 4¾” (12.1cm) long, 1½” (3.8cm) wide. 2-15⁄16" (7.5cm) hole spacing.

Nyhetsbrev